Eleaf Istick

[Katdarling]

Yeah, why is the i"Stick" not a "stick"?

And, hi, I joined the club when I won an istick 20 a couple of weeks ago. I love it and am taking very good care of my threads!

Take care of your eggplant, too, ok? It's beginning to look rather octopuss..... hmmm.... don't think I can type that.

fasttech shows these will ship in 7 days. That usually means they don't have them in stock now, but expect them in 7 days. Sometimes that happens, and sometimes it doesn't. I waited weeks for an item that was supposed to "ship in 5 days" and I finally cancelled my order and got a refund. Just bringing this to everyone's attention so if you order, you may be waiting. And waiting.

With that said, I love the red silly-cone cover!

love o' coffee - I placed an order in January that is nowhere to be found. FT has informed me on numerous occasions that the delay is due to our winter storms. I wonder what they will say come July...

Tearose50 see this post and the one right after,

http://www.e-cigarette-forum.com/fo...ion/601111-eleaf-istick-994.html#post15108035

Thanks! Glad to see that my memory wasn't too far off! Here's a new summary.

Turn it off and charge is one common fix.

Turn it down to lowest and fire or take a hit; Turn it all the way up and fire or take a hit; Then run it back to your sweet spot. These actions tend to reset, sort of like a good old reboot of the system.

Anyone BLOGGING this (ahemcoughteacough)?

I'm still waiting and running out of popcorn while waiting. The answer is taking forever Kat!

Then we shall have wine, in mega amounts. Come over.

7 12's = 84 hrs so at least 44 hrs overtime maybe more. Plenty of rest is necessary to stay focused, have to work with the cell phone addicted young ones.

You know. I usually end up everywhere, preheats, economizer, water wall, baghouse, wet bottom, anhydrous ammonia skid, any where there is pipe or tubes. I'm gonna try to check in with my tablet. Wife has claimed my laptop.

Sounds like you know. All of it's nasty with fly ash everywhere. Could be gone for several weeks. Waitin on vape mail before I leave, gotta have my juice

Bikers, I/we shall miss you, greatly.

Yeah I used to work with some guys who would beg a welder, operator, helper anyone to do some pitot tube or inside stuff rather than crawl in there. I used to love hanging suspended in the fire box

(for those wondering E&I is not eating and intoxicated it is Electronics & Instrumentation)

You're just no fun anymore.

 

[mudram99]

Take care of your eggplant, too, ok? It's beginning to look rather octopuss..... hmmm.... don't think I can type that.




love o' coffee - I placed an order in January that is nowhere to be found. FT has informed me on numerous occasions that the delay is due to our winter storms. I wonder what they will say come July...

Tearose50 see this post and the one right after,

http://www.e-cigarette-forum.com/fo...ion/601111-eleaf-istick-994.html#post15108035


Anyone BLOGGING this (ahemcoughteacough)?






Then we shall have wine, in mega amounts. Come over.






Bikers, I/we shall miss you, greatly.






You're just no fun anymore.

I love to still get intoxicated, just not suspended 100 feet in the air inside a boiler!

 

[skyboxer1968]

I think I prefer the button on my 20w over the 50w. It has a better click to it.

 

[mudram99]

I think I prefer the button on my 20w over the 50w. It has a better click to it.

I have to agree, my 50 has been tested and placed on the bench, I still tote my 20s mostly with my moonberry juice in a iclear x.i, and use my 30s with my subtanks Reg, Mini & nano with some juices that need a little more umph to them.

 

[inspects]

I have to agree, my 50 has been tested and placed on the bench, I still tote my 20s mostly with my moonberry juice in a iclear x.i, and use my 30s with my subtanks Reg, Mini & nano with some juices that need a little more umph to them.

Seems like I do the same, the 20's and 30's are fine for my style of vaping, much more comfortable in the hand too......

50's are sitting in the corner, and they haven't done anything wrong......

 

[Buster282]

This is for all the Kayfuners in the iSticker thread - a Kayfil Tool! what'll they think of next?

https://www.fasttech.com/products/1/10009156/2184401-kayfil-tool

 

[inspects]

This is for all the Kayfuners in the iSticker thread - a Kayfil Tool! what'll they think of next?

https://www.fasttech.com/products/1/10009156/2184401-kayfil-tool

---------------------------------------------

 

[inspects]

This is for all the Kayfuners in the iSticker thread - a Kayfil Tool! what'll they think of next?

https://www.fasttech.com/products/1/10009156/2184401-kayfil-tool

Oh you got me laughing....all for $2.94 ...PLUS.... six month delivery time----------------

 

[Katdarling]

This is for all the Kayfuners in the iSticker thread - a Kayfil Tool! what'll they think of next?

https://www.fasttech.com/products/1/10009156/2184401-kayfil-tool

Looks like someone took a page out of the karto filler tool book, eh?

 

[emmsma]

I seem to have swung the other way. My poor i20's sit in the stand, only used occasionally in house, for a flavor change. My most used are the i50 and Cloupor Mini, with the i30 and Beyang close behind.

But now I am wanting to try some of the new Sub ohm tanks that are coming out. I love the Kanger Subtanks - I have 5 of them - but wondering what I'd think of some of the others.

Anybody using any of them? Whaddya think?

 

[Katya]

This is for all the Kayfuners in the iSticker thread - a Kayfil Tool! what'll they think of next?

https://www.fasttech.com/products/1/10009156/2184401-kayfil-tool

Looks like someone took a page out of the karto filler tool book, eh?

AKA slap yo' mama universal tool.

 

[inspects]

I seem to have swung the other way. My poor i20's sit in the stand, only used occasionally in house, for a flavor change. My most used are the i50 and Cloupor Mini, with the i30 and Beyang close behind.

But now I am wanting to try some of the new Sub ohm tanks that are coming out. I love the Kanger Subtanks - I have 5 of them - but wondering what I'd think of some of the others.

Anybody using any of them? Whaddya think?

Good lord, I must have 20 sub tanks, I love the rebuildable decks, they're super easy to work with (even with poor eye sight)-----

 

[Katya]

This is for all the Kayfuners in the iSticker thread - a Kayfil Tool! what'll they think of next?

https://www.fasttech.com/products/1/10009156/2184401-kayfil-tool

Another one for the Kayfuners--Kayfun V6, top filled and takes Atlantis coils.

Don't ask me what happened to V5.

https://www.fasttech.com/products/0...n-v6-styled-rta-rebuildable-tank-atomizer-5ml

 

[ThunderDan]

Another one for the Kayfuners--Kayfun V6, top filled and takes Atlantis coils.

Don't ask me what happened to V5.

https://www.fasttech.com/products/0...n-v6-styled-rta-rebuildable-tank-atomizer-5ml

That thing is so odd, and pointless.

Sent from my Nexus 6 using Tapatalk

 

[Katya]

That thing is so odd, and pointless.

Sent from my Nexus 6 using Tapatalk

Why pointless? I think it's a nice design.

 

[ThunderDan]

Why pointless? I think it's a nice design.

The kayfun / rba mode has a tiny airhole making the larger chimney, and AFC a moot point.

I guess if you want another tank to put Atlantis coils in that's cool? I'd rather just pick up an actual Atlantis, or Melo if on a budget.

Sent from my Nexus 6 using Tapatalk

 

[Katya]

The kayfun / rba mode has a tiny airhole making the larger chimney, and AFC a moot point.

I guess if you want another tank to put Atlantis coils in that's cool? I'd rather just pick up an actual Atlantis, or Melo if on a budget.

Sent from my Nexus 6 using Tapatalk

I see your point. But it's hard to tell from the picture exactly how big that hole is... It's still a beta, though, so we don't know what the final version will look like. I don't want Atlantis or Atlantis-size airhole. I want a Kayfun lite with more airflow. And top filled. And 22 mm diameter.

 

[inspects]

I see your point. But it's hard to tell from the picture exactly how big that hole is... It's still a beta, though, so we don't know what the final version will look like. I don't want Atlantis or Atlantis-size airhole. I want a Kayfun lite with more airflow. And top filled. And 22 mm diameter.

Katya.....Kayfun Lite Plus v2 by EHPRO (Larger Airflow Hole) - Eciggity has them for 35 bucks.

 

[Katya]

Katya.....Kayfun Lite Plus v2 by EHPRO (Larger Airflow Hole) - Eciggity has them for 35 bucks.

Thanks, inspects. That's the one I have--they come with a larger side airflow hole, but the airflow hole in the deck is still too small--it's the same size as other Kayfuns... Alas!

 

[ThunderDan]

I see your point. But it's hard to tell from the picture exactly how big that hole is... It's still a beta, though, so we don't know what the final version will look like. I don't want Atlantis or Atlantis-size airhole. I want a Kayfun lite with more airflow. And top filled. And 22 mm diameter.

Get a kayfun 4 with 4S kit.

Katya.....Kayfun Lite Plus v2 by EHPRO (Larger Airflow Hole) - Eciggity has them for 35 bucks.

Those have better airflow in theory than in practice. My wife has one and I can't tell a difference in airflow vs my authentic KFL+. My tobeco KFL+ clone with center post drilled out to 2mm has more airflow than the ehpro.

Sent from my Nexus 6 using Tapatalk