ePipeMods.com Fully Custom Made Wood E-Pipes

[Dieseler]

Hi there Matt just found this thread and it caught me by surprise - Pipes !
I carved a few back in the 90s and used to buy my briar from iwan ries shop in Chicago a very well know old establishment.
Matter of fact i still have a couple of briar blocks .
Anyways your are very nice .

If you or anyone is curious you can see them in my 2nd photo album by clicking on my screen name. I did not want to post them here and be out of line.
No im not selling or advertising i could never part with those even though i no longer smoke em i just vape nowadays.
Hope your wife's surgery goes well Matt.

 

[dirquist]

Matt, so sorry for your wife. Thats gotta hurt something awful. Tell her all the fans are thinking of her and wishing her a speedy recovery.

I just have not been so lucky finding drip shields but I know a couple places to look, Empire Mods and tha angry bird place or whatever it is called. If there are other good places to find drip shields that will work let me know everyone

GreatDane76. I bought two of the Universal Churchwarden and one Peterson. Sounds like it was just luck but the Peterson fits in perfectly without the adapter. I dont twist it all all to insert, just push directly in and its fairly tight with very little force. It pops out nicely to drip into also. But with what Matt's saying I dont think the DCA is the way to go with these. I ordered a black DCA on Saturday also before I fully figured all this out.

Oh, I sent a PM Matt. Thanks bud.

 

[MistBusterMatt]

Matt, so sorry for your wife. Thats gotta hurt something awful. Tell her all the fans are thinking of her and wishing her a speedy recovery.

I just have not been so lucky finding drip shields but I know a couple places to look, Empire Mods and tha angry bird place or whatever it is called. If there are other good places to find drip shields that will work let me know everyone

GreatDane76. I bought two of the Universal Churchwarden and one Peterson. Sounds like it was just luck but the Peterson fits in perfectly without the adapter. I dont twist it all all to insert, just push directly in and its fairly tight with very little force. It pops out nicely to drip into also. But with what Matt's saying I dont think the DCA is the way to go with these. I ordered a black DCA on Saturday also before I fully figured all this out.

Oh, I sent a PM Matt. Thanks bud.

Empire apparently has some new shields in --------------> GO FAST!!!

 

[MistBusterMatt]

Hi there Matt just found this thread and it caught me by surprise - Pipes !
I carved a few back in the 90s and used to buy my briar from iwan ries shop in Chicago a very well know old establishment.
Matter of fact i still have a couple of briar blocks .
Anyways your are very nice .

If you or anyone is curious you can see them in my 2nd photo album by clicking on my screen name. I did not want to post them here and be out of line.
No im not selling or advertising i could never part with those even though i no longer smoke em i just vape nowadays.
Hope your wife's surgery goes well Matt.

You are more than welcome to post your pipe pics on my thread.
I love to see good craftsmanship and I am friends with a several "wood mod" guys around here ;D

 

[dirquist]

Empire apparently has some new shields in --------------> GO FAST!!!

Well hell, I couldnt decide which color so I bought 3 of them. They didnt seem to have the cut model in stock, only option was solid colors. Oh well, good enough for now. I really like this 306 thing. It fits my lifestyle and vaping habits well along with another pipe set up with the Mega DC.

 

[Ionredline]

Katie told me about Rachel's accident, sorry to hear about that. I hope she isn't in too much pain. Anything we can do, just let us know.

 

[GreatDane76]

Wow Matt...hope all goes well with your wife's surgery Friday. Horse falls are very scary and despite the severe fracture I know we're all glad it wasn't worse.

Thanks for the tips on the DCA guys... I bought one because I liked the way it looked on Ion's pipe... so hopefully I can get it to cooperate I also ordered a couple Empire Mods drip shields so I'm anxious to see how those work out.

Can't wait to see the new pipe batch!

 

[dirquist]

IMG_6694 by pseudohippy, on Flickr


IMG_6688 by pseudohippy, on Flickr


IMG_6673 by pseudohippy, on Flickr


IMG_6708 by pseudohippy, on Flickr

The 306 ring works perfect on the Tangerine Dream. Perfect fit. So now my work pipe on the bottom is going to adopt one from Matt (you rule man). Peterson fits perfect on my DCA. All is well in the world.

 

[Dieseler]

here you go Matt carved with a dremel hand sanded then bee's wax applied. The stems were from various other pipes i had on hand at the time.
I made that shaving brush handle also and bought the head and epoxied it in and use it several times a week since the mid 90s.
Thats one of 2 briar blocks i still have.
Thanks for letting me post this picture Matt

You are more than welcome to post your pipe pics on my thread.
I love to see good craftsmanship and I am friends with a several "wood mod" guys around here ;D

 

[arjay55]

Very nice work there Dieseler.

 

[Lax]

IMG_6694 by pseudohippy, on Flickr


IMG_6688 by pseudohippy, on Flickr


IMG_6673 by pseudohippy, on Flickr


IMG_6708 by pseudohippy, on Flickr

The 306 ring works perfect on the Tangerine Dream. Perfect fit. So now my work pipe on the bottom is going to adopt one from Matt (you rule man). Peterson fits perfect on my DCA. All is well in the world.

HiFi and ePipe pron all in one shot...very nice!

 

[dirquist]

HiFi and ePipe pron all in one shot...very nice!

Thanks man. Smoking while listening to music with headphones was a tough thing to part with. Having a pipe, and sitting in my listening chair is the perfect combo made in heaven.

Im surprised the steam punk fans didnt like the headphones in the first pic. Very steampunky. They are Audeze LCD-2 rev. 2.

 

[DataPhreak]

kinda hard to see. wasn't sure what it was. as for the guy who sold his bike to buy a ring, no way man. I'd have kept the bike.

 

[dirquist]

kinda hard to see. wasn't sure what it was. as for the guy who sold his bike to buy a ring, no way man. I'd have kept the bike.

That was me lol. I should have kept it. I still have the wife many years later but I miss my old bike. I did have a 2006 VTX at the same time to be fair that was brand new at the time. I thought I was over the sport bikes when I did it. But now I want another one.

 

[Dane]

Hi Matt. I'm sorry to hear about your wife's crash. I hope the surgery has gone well, and wish her a fast recovery.

 

[ChaosAffect]

Matt's wife was in a crash? That explains why he hasn't responded to my email! Jeez, Matt, I hope everything's OK, bro.

 

[MistBusterMatt]

Hey everyone,
My wife had her surgery last night. The bone's been pieced back together with a plate and screws and already she feels much better.
Thanks for everyone's prayers and support

 

[Ionredline]

I'm going to have to call her plasticorn from now on. lol

 

[thejager]

My thoughts are with you both

 

[dirquist]

+1 ^^^ Really, were all thinking of you guys. Glad to hear that she is feeling a bit better and the doctors got the job done well.