ePipeMods.com Fully Custom Made Wood E-Pipes

[MistBusterMatt]

My brother took out the bad fuse replaced it with wire.
Says it hits great now.
So any harm in that?

The V2 pipes no longer have a hot spring.
It's highly unlikely that the switch would get stuck in the on position in conjunction with a hard short,
However if this did happen, you could vent a battery.
A battery vented in one of our pipes would not be as violent as a tube mod... but still not fun.

I don't recommend "hot wiring" a pipe, especially with the faulty buttons.
The safety features that I've added are for the users protection.
What you guys do with it after you get get it... is up to you.

I'll get replacement fuses on the site tomorrow.
Sorry about the delay with them.

 

[skullfreak]

Ok I will let him know.

 

[Radikalc]

Hi Matt,

The thor will arrived with the V2 or later??

 

[*ASH*]

I highly recommend a mega type B LR atty and the IMR 18350 batteries for this mod. Great clouds of vapor and throat hit from this atty. I have a great idea for my next pipe too which will challenge you guys. Sad thing is my wife has cut off my mod fund. She told me my new truck is my only expensive for a while.

I'm thinking a churchwarden with a 510 atty/carto that screws inside the shank with a skinny long stem.

Like these:
View attachment 36030View attachment 36031

That What Exactly am looking for , except the pipe it self want it to be like more like old stuf.

 

[*ASH*]

Shirt Size XL...

As for the stand... You just love giving me challenges don't you!
I'll have to make 2 (one for me as well)

You both really Imagen mea it's like you both reading my mined am looking for some thing like that sine 1 month and I didnt fined something even close for what I want .

So want to know did u Succeeded with it . and I think you did . so If yes I think I will be one of your customers for long long time.

I will try to not post again until am done from all pages lol

Man You ROCK

 

[MistBusterMatt]

Here is the link to the fuses->

Replacement Fuses for V2 Pipes x5 - Pipe Supplies- Batteries, Atties, Stems, Chargers, etc.

 

[*ASH*]

Thanks for it mate .
Now am done with all post my question now If i love one or more of the old pipe can i send you the pic of it so you can make one for me or can't do that ?
I will cross my finger that you can do that.
Thanks again for ur answer.

 

[Jason_in_nc]

I'm with Ionredline and Ashes.... the Pipes are already what I want (except for a lack of automatics, but that's understandable since automatics have such a short lifespan) but it's the stems that seem to have the most room for innovation.

About half the time I vape my pipe through an analog churchwarden stem that I accidentally broke a few years ago. I took a knife and whittled the end down enough to jam it into a 510 atty. It's the exact same diameter as a 510 and looks seamless. It doesn't flare out of the top of the atty or anything. It just continues the lines begun by the atty.

However, it's only a friction fit so as soon as the atty cools down, it looses the fit. It's only about six inches long, but because it's seamless, it looks awesome and makes a nice middle-sized churchwarden.

I think the cherryvape stems are functionally perfect, but aesthetically, I think they would benefit from narrowing to continue the diameter of the particular atomizers they're intended to fit.

 

[skullfreak]

What ya think?
The shield is on the pipe stem then the universal will go in a skinny tank.

 

[snooke_master]

What ya think?
The shield is on the pipe stem then the universal will go in a skinny tank.

Ya got those from Walmart...? N000ooo waaaay.....

 

[ssredchevelle]

Ya got those from Walmart...? N000ooo waaaay.....

Hahahah That is too funny.

 

[*ASH*]

I Think here is a really new technology will do alot of change in Mode World " For Users ". I love it it's like Vap Safe All The Way .
Check it from 7:45 Until The End.

 

[*ASH*]

Matt Just want you to mak it let ay more clearly the only different between Fuse & Buzzer, that Buzzer just give that tone when something wrong ? And other than that both do the same work ? And If yes so what the Benefits or Vale to have 2 !

 

[oldmansam253]

Hi I'm Sam, and I'm addicted to Epipemods...

I have a Lavatube that used to be my daily grind mod...

Now, since I got my pipe, the Lavatube sits on my coffee table as my morning vape.
With a churchwarden stem, I rest the bowl in my hand, over my heart, a blissful state.
Gandalf The Grey! Gandalf The White!
My Lavatube sits in my house as my Epipemod sits in my sight...

I am OBSESSED... and bored

 

[Jason_in_nc]

I was wonderig how that fuse was gonna work. That's pretty awesome!

 

[*ASH*]

I was wonderig how that fuse was gonna work. That's pretty awesome!

So you get the different betwen 2 ?

Sam Nice to met you

 

[trepalium]

Why is everyone out of stock. I want one.

 

[Keegan1014]

Why is everyone out of stock. I want one.

High quality, is always in demand


Sent from my GalaxyNexus using Tapatalk 2

 

[dirquist]

Why is everyone out of stock. I want one.

The good news is that there is a huge new wave incoming very soon so if you can hang on a couple/few weeks you can get one no problem.

 

[*ASH*]

The good news is that there is a huge new wave incoming very soon so if you can hang on a couple/few weeks you can get one no problem.

It's just I can't wait to see the collection and get one