Oh I know, that was a hell of a game by both pitchers but I wish he would have got his 200th..
- Status
You should try Highbrow's coffee. I haven't had it, but the Cappuccino Diablo is outstanding and their RY4 is my all day.
Highbrow Vapor Coffee
Their juices are exceptional, deep, nuanced, and spot on. The way the flavors unfold has to be some sort of wizardry. Plus they are not only made to order, but fully customizeable. Their Chai Tea (which I order with cream and sugar) is my standard evening vape.
We make every pitcher into a Cy Young candidate. Who was that craptastic guy nobody's ever heard of who pitched a perfect game against us last year and cant even stay on a team
Phillip HumberI think I heard on the radio that the Mariners produce 2 runs a game for him over his career. Or it might have been in the last several years. Kinda missed it. But if thats true its a complete embarrassment.
First make a loop in your silica wick and wrap the coil about 1/2" from the end of the loop.
Then run one of the NR leads (or both) through the holes in the ceramic cup.
Pull your wick loop over the bottom peg of the ceramic cup and run 1 of the NR leads into the hole of the peg (this can be tricky, there doesn't need to be a lot of wire in that hole. 1/8" will do.
Then press the ceramic cup onto the center pin of the base. This can take some effort and may push the center pin out of the bottom of the base (pictured). Squeeze them together hard and everything will fit nice and snug. Tuck the two loose ends of wick down the sides.
Take your second lead wire and place it in one of the two side notches. Bend it over and secure it in the direction of tightening the treads.
Screw the top portion down tight. If there is a gap (pictured) it will flood. Check the wire that is folded over the threads, it may be too long and interfere with screwing down the top tight.
This is a nice tight fit
All that is left to do is ohm it out.
Ready to vape!
Then run one of the NR leads (or both) through the holes in the ceramic cup.
Pull your wick loop over the bottom peg of the ceramic cup and run 1 of the NR leads into the hole of the peg (this can be tricky, there doesn't need to be a lot of wire in that hole. 1/8" will do.
Then press the ceramic cup onto the center pin of the base. This can take some effort and may push the center pin out of the bottom of the base (pictured). Squeeze them together hard and everything will fit nice and snug. Tuck the two loose ends of wick down the sides.
Take your second lead wire and place it in one of the two side notches. Bend it over and secure it in the direction of tightening the treads.
Screw the top portion down tight. If there is a gap (pictured) it will flood. Check the wire that is folded over the threads, it may be too long and interfere with screwing down the top tight.
This is a nice tight fit
All that is left to do is ohm it out.
Ready to vape!
First make a loop in your silica wick and wrap the coil about 1/2" from the end of the loop.
Then run one of the NR leads (or both) through the holes in the ceramic cup.
Pull your wick loop over the bottom peg of the ceramic cup and run 1 of the NR leads into the hole of the peg (this can be tricky, there doesn't need to be a lot of wire in that hole. 1/8" will do.
Then press the ceramic cup onto the center pin of the base. This can take some effort and may push the center pin out of the bottom of the base (pictured). Squeeze them together hard and everything will fit nice and snug. Tuck the two loose ends of wick down the sides.
Take your second lead wire and place it in one of the two side notches. Bend it over and secure it in the direction of tightening the treads.
Screw the top portion down tight. If there is a gap (pictured) it will flood. Check the wire that is folded over the threads, it may be too long and interfere with screwing down the top tight.
This is a nice tight fit
All that is left to do is ohm it out.
Ready to vape!
its like a mini penelope lol
That was my first thought. I hope this helps you guys. It just goes over the build not the extender/flow control, and tank set up.
The flavor profile of Boba's Bounty (to my taste buds) is a maple syrup tobacco with under notes of vanilla/caramel. It is my second all day vape. Matt's Oak Barrel Cider being my primary.
Here's some Gandalf pron for ya Juicy
Here's some Gandalf pron for ya Juicy
Last edited:
The flavor profile of Boba's Bounty (to my taste buds) is a maple syrup tobacco with under notes of vanilla/caramel. It is my second all day vape. Matt's Oak Barrel Cider being my primary.
Here's some Gandalf pron for ya Juicy
What atty is that? I swear there are hundreds of new RBAs coming out every month! I can't hope to keep up anymore.
The flavor profile of Boba's Bounty (to my taste buds) is a maple syrup tobacco with under notes of vanilla/caramel. It is my second all day vape. Matt's Oak Barrel Cider being my primary.
Here's some Gandalf pron for ya Juicy
Nevermind. For some reason the pic came up as juice at first. Weird. Sweet rig! ENVY
Last edited:
This is a much older RBA, it's a Bulli-Smoker SS A2 Classic RBA. I picked it up on a different forum classie for relatively cheap. It came with wick, wire, filler, 510 mouthpiece adaptor, and most importantly an eGo ring that is designed for the A2. It has an unorthodox rebuild, but the FTV is Great.
Man I can't take it until I get one. Those 8 inch church wardens are bad .... Do the 8 inchers come in any other colors other than classic black?
Im waiting for matt to chime in with a "For now! mwahahahah"
LMAO, I would love to see them in Black Rose, Tortoise Shell, and Red Tortoise Shell.
Just read the news report... Hand grenades for a robbery? ...Whiskey Tango Foxtrot?
Last edited:
Yeah pretty nuts... I'm 3 towns away and I dispatch so it's getting crazy haha
We just had a guy call in for a heart attack and then hold the paramedics hostage down here.
Happened like 5 miles from my house!
Happened like 5 miles from my house!
- Status
Similar threads
- Locked
- Locked
