ePipeMods Fully Custom Made Wood E-Pipes - Part 2

Status
Not open for further replies.

Dusty_D

Original Guru
Senior Moderator
Supporting Member
ECF Veteran
Verified Member
Jul 22, 2010
16,228
47,678
53
Toronto, Canada
dustysfoodieadventures.blogspot.ca
Here's a brief explanation of what went down last night?!

The issue had to do with two vendors cross-posting business related information in this thread. That, according to the Supplier Terms of Service is not allowed. A vendor can chit-chat in another vendors thread with their permission and that is fine, but there has to be no shop talk. The chatter about the 510 connector was the issue and as such was removed, and communications sent to the vendors in question.

Now, where things start to get bad is when the removal of business posts does not go over well, either from the vendors perspective or from the vendors supporters. That's when the thread starts to look like a mine-field. Discussion of moderation in the open forum is not allowed, not only on ECF but on ALL forums. That is an actionable item on forums and while we try and temper it by issuing Rule Reminders (which we have not yet done in here) rather than issuing infractions, we try and see if it can be stopped by posting in the thread and/or deleting posts. However, if the trend continues, my hands will be tied with as to how things go down. So, please drop the discussion about moderation. If you have an issue, report it or PM the moderator or Forum manager.

Matt and I have been exchanging PM's yesterday evening, and it's just as upsetting to me as it is to him. After all I've been part of this group for almost 3 years now too.. He is one of perhaps a handful of ECF vendors that I deal with on a regular basis. Unfortunately in order to be fair to all vendors, we cannot show favoritism on the board and at times are forced to make and carry out decisions that put us in a bad spot with our favourite vendors.
 

Dusty_D

Original Guru
Senior Moderator
Supporting Member
ECF Veteran
Verified Member
Jul 22, 2010
16,228
47,678
53
Toronto, Canada
dustysfoodieadventures.blogspot.ca
With "Big Brother" watching it might be time to find a new forum to hang out in is all I can say


Sent from my iPhone using Tapatalk


I've been an ardent supporter of Matt and a member of this group for almost 3 years now. I've handled spammers and deleted posts in this section before. Suddenly I'm "Big Brother"?!

That is insulting tmillin!!
 

Ironworker808

Super Member
ECF Veteran
Jan 14, 2012
329
811
52
Home Of The Worlds Most Famous Rat
Dusty.

Okay. Cool. Perfectly understandable.

I understand that you're just enforcing what you have to. My post had nothing to do with the hardware discussion, so I was confused why it was deleted. I thought he was making a Star Trek reference.

Thank you for the explanation.

Matt, hurry back. I might not post every day, but I open this thread several times a day so see what's being said/shown. Love this place.
 

gwbard

Super Member
ECF Veteran
Verified Member
Aug 16, 2012
381
1,468
Florida
This kind of thing happens from time to time on every forum I've been in, even in the most well-behaved threads. No big deal. Dusty has had to nuke a post or two of mine but I don't take it personally.

"Da Rules is Da Rules"​

Let's just chill everyone & get back on topic -- fabulous ePipeMods :D
Y'all know I love the Big & Bold freehand masterpieces,
but I've also been really enjoying the small drippers this week:
2dumic1.jpg

(especially since I've got all this Steam Sauce to try out) :)
 

MistBusterMatt

Unregistered Supplier
ECF Veteran
Feb 11, 2011
2,975
4,477
Ga USA
For the record, I said nothing derogatory, ugly, accusational, there was no profanity, there was no "high emotions".
From anyone for that matter. I simply asked a few questions. I don't appreciate being made to look like a bad guy either, I'm sure others feel the same.

Again, stepping away for a while.
 

Dusty_D

Original Guru
Senior Moderator
Supporting Member
ECF Veteran
Verified Member
Jul 22, 2010
16,228
47,678
53
Toronto, Canada
dustysfoodieadventures.blogspot.ca
For the record, I said nothing derogatory, ugly, accusational, there was no profanity, there was no "high emotions".
From anyone for that matter. I simply asked a few questions. I don't appreciate being made to look like a bad guy either, I'm sure others feel the same.

Again, stepping away for a while.

Nobody said that you did, Matt. It was a simple matter of a rule being bent due to a misunderstanding. There was nothing that could not have been sorted out via a PM.




Sent from my iPhone using Tapatalk 2
 

Dusty_D

Original Guru
Senior Moderator
Supporting Member
ECF Veteran
Verified Member
Jul 22, 2010
16,228
47,678
53
Toronto, Canada
dustysfoodieadventures.blogspot.ca
I kinda feel like this whole thing is a bit of a scar on the face of this awesome thread... I'm not going to make any judgements on the rule, but is there any way we could get the remnants of this mess cut out and placed in a thread of it's own?

I can make all the posts since yesterday evening disappear, with Matt's permission ofcourse and a promise that it won't get dragged back up by anybody else. :)
 

spartanstew

ECF Guru
ECF Veteran
Verified Member
Jun 29, 2013
11,496
18,348
Wylie, Texas
For the record, I said nothing derogatory, ugly, accusational, there was no profanity, there was no "high emotions".
From anyone for that matter. I simply asked a few questions. I don't appreciate being made to look like a bad guy either, I'm sure others feel the same.

Again, stepping away for a while.

For what it's worth Matt, that's not the impression I got. As Dusty alluded to, I just viewed it as a simple misunderstanding, and if anything, you were the good guy.
 

Crocky

Ultra Member
ECF Veteran
Verified Member
Mar 14, 2013
1,752
2,280
North Carolina
More Steam Baux's have just hit the site! Exotic woods and custom accents!
e-hookah for vendors


Matt any single units? Also is there and option not to have the audible programming or whatever you call it. I am not sure how that works and it may be easy peasy but seems it would be confusing. I am very interested in a Us baux so wanted to check on whether or not you have them in singles....maybe I missed it. Are they like a DNA 20 chip? Also are the 510 connection recessed for flush connection?
 

FnMag

Super Member
ECF Veteran
Verified Member
May 27, 2013
530
765
Dothan, Al. USA
Matt, I didn't catch all the posts and nor do I really care. But PLEASE, don't disappear even for a few days. What makes EPM, ECF and this thread the best is the fact that you are here to help us when we have issues, Show us the new stuff, value our opinions and as far as I am concerned... Are a great all around guy & Vendor.

Keep Calm & Vape (post) on Brother !
 

Jahf

Super Member
ECF Veteran
Verified Member
Feb 14, 2013
374
548
Nederland, Colorado, United States
I'm just here for the ePipes ... wherever the discussion lands, I'll be there. Obviously not Facebook, BJ can't afford the cardio appointment.

On the subject of the Protanks ... unfortunately they don't all use the same replacer coils. I was REALLY excited about the Nautilus tank ... until I saw that it is the one Aspire BCC device that doesn't use the same coil. :sigh: So for now I'm passing on it. But it otherwise looks great. I hope the tank manufacturers finalize a coil design they can stick with for a couple of years each. Nautilus -could- have used the existing design with just an adapter.
 
Status
Not open for further replies.

Users who are viewing this thread