epuffer

[RB37]

that is correct. An assembled 65mm battery BMF will not fit in the slot for the assembled M602C.
Also a 65mm battery will not fit in the charging slot with the lid closed.

 

[pmos69]

Humm, you must have a different M602C PCC than I have.
On mine, a 70mm battery will fit on the charghing slot with the lid closed.
Weird.
(can post some pictures if you want)

EDIT:
Just checked: There are 2 different m602c cig sizes, 96mm and 109mm, and the PCC's internal "padding" is adjusted for each one.
I got the larger size (my supplier made a mistake and is replacing the bats for the smaller ones).

My current batteries are 70mm, and yes, they fit in the charging slot. The connection must be lower than in your PCC. A complete cig does not fit in the other slot, of course.
When the short batteries arrive, I'll have to remove the small foam piece at the bottom of the other long slot in order to be able to put a complete cig there. already checked it and it's just a piece of loose foam to lift the battery stored there.

Still, the bloog 65mm bat cigs would not fit there, because the pcc height is still the same 97mm.

 

[RB37]

thats weird, I hope the ones I ordered from onlyecig DOT com are the same size as the kit I got from donttouchmybutt

 

[pmos69]

Thanks pmos69, just ordered one to try it out.

You're fast
When you get it, can you check if they are really compatible with the colibri?

 

[RB37]

will do, I don't really expect it till next week since its coming from overseas.

I also got my order in from "onlyecig DOT com", I am pretty disappointed, I thought their "M602C batteries" would be the same as the M602C batteries I got from donttouchmybutt.com, but they are longer. The PCC's are different too since the lengths are different. What annoys me is you cannot fit an assembled ecig in the PCC from "onlyecig DOT com".

 

[pmos69]

Yeah, I think they changed the specs.
I got the 70mm bats too, but my local supplier will get me the shorter ones. For what it's worth, he said they changed the specs because the fully assembled e-cigs in the case would activate frequently and burn the cartos.
You can still adjust the pcc to put a complete e-cig with the shorter batteries in there. You have to remove the foam piece at the bottom of that hole.

 

[RB37]

I understand, but it still sucks, wish they would have that info on their site as to the exact size of the batteries, etc.. If I have to use longer batteries, I would much rather be using the BMF shorties as their auto switch is better. I still have another order coming from onlyecig, and I think it was for 8 more batteries and 100 cartomizers, along with a few PCCs. If they are long, they are worthless to me

 

[pmos69]

Look at the specs on their site: http://www............../ecigarette...it-p-60.html?zenid=jcecvkuuu93fhu0jrdeguusl81
They now say 109mm length.
But I'm sure they said 96mm a few days ago,

 

[RB37]

ugh, just when I find the one thing I like, they change it...
I wonder if the stuff from donttouchmybutt.com will be different as well.

Guess I will just use the PCC with BMF batteries, without one assembled, and will have to put together and take apart everytime I want to vape. Oh well, could be worse. Maybe Bloog will offer a shorter version soon, that would be the perfect solution for me, and use this PCC.

 

[pmos69]

Yeah.
The battery switch on the M602C is, well, not very good at all, at least on my batteries.
I find the cartos also a lot inferior to the BMF cartos.
I do like the PCC, though :/

 

[RB37]

Will see how the liberro does when it shows up, the vid makes it look promising

 

[pmos69]

It really seems like a colibri, but without the ash cap (and so 2mm shorter).
Strange in only comes with one battery though.
And I find it very hard to believe the specs on their website (190mah battery).

 

[RB37]

Yeah, I didnt catch that it only came with 1 battery, until I saw you post that. I would have ordered another one had I actually read first. Oh, well, if its the same battery as the Colibri, I really like how the Colibri auto switch is, no false activations at all. Just dieing to test out the Realis empty cartomizers, if they perform like I saw in the video they have on their site, I think I will have a pretty decent little setup here.

 

[RB37]

I must say, this darn Colibri is hard to keep on the shelf, I keep going for it. Sure wish there were empty cartomizers for it. No matter what I do I cant rid the nasty taste of the original prefill. Hopefully my liberro realis will get here soon!

 

[RB37]

Good news epuffer colibri fans! I just got word from epuffer that blank cartomizers will be out mid april!

 

[pmos69]

hope they have soft caps...

 

[RB37]

I doubt they will. I am actually ok with the hard caps. I just want BLANKS!!! This little devil is nice, but would be so much better with my own juice in a clean to start cartomizer.

 

[RB37]

Just got the Liberro realis in, its just a tad thicker than the epuffer, so it wont fit in the epuffer PCC
I cannot get the amount of vapor out of mine that is shown on the video either.
Love the size, but again, hate the PCC since it wont hold an assembled ecig.
Another one on the shelf of failures...

 

[pmos69]

Just got the Liberro realis in, its just a tad thicker than the epuffer, so it wont fit in the epuffer PCC
I cannot get the amount of vapor out of mine that is shown on the video either.
Love the size, but again, hate the PCC since it wont hold an assembled ecig.
Another one on the shelf of failures...

ah crap

 

[RB37]

yeah, tell me about it. Have you seen anything else worth a shot? I ordered the Patriot from myfreedomsmokes yesterday, but I am pretty sure its just another M602C.

Atleast I have my bloog maxx fusion, it satisfies well, just wish there was a PCC that would work with it that suits my desires.