Esterigon official

Status
Not open for further replies.

Otello

Super Member
ECF Veteran
Verified Member
Nov 11, 2013
371
672
68
Roma - Italy
www.facebook.com
Just revert the electronic part and battery orientation should fix that problem.

Sorry, no.

If there is a direct contact with the battery, the battery feed directly the atom.
To use an electronic circuit, the battery must feed the circuit, then the circuit feed the atom.
 
Last edited:

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
if you make a bigger resistance then you will be more than ok mon:)
question maybe not for imeo who vape flavourless juices ;) Do you still have your juice flavour at this kind of wattage? personaly, anything above 15W taste like burnt juice when using microcoil/cotton ... I don't actually feel like I need this kind of setup, but wouldn't mind be succesfull for the fun of it :)
 

ManniGfaltig

Ultra Member
ECF Veteran
Verified Member
Oct 26, 2011
1,061
1,366
Germany
Sorry, no.

If there is a direct contact with the battery, the battery feed directly the atom.
To use an electronic circuit, the battery must feed the circuit, then the circuit feed the atom.

Maybe I am too tired but do not see your point. I always thought that the important thing is the output of the regulator, which is connected to the atty which is connected to the battery.
So we flip the electronics, its output looks away from the atty now, we flip the battery so that the + now points to the spot where plus should be (and minus looks towards the atty).
But there is a point that I see why this can't work without (major) design changes: The electronics contact is currenty "low sensitive", also the "Ground" of the electronics would be on Vcc.
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
that was our first thought when me and engineer talked about electronics zero. But as you see on my above post, we can make proteus electronics work on justGG even if we only have justGG button for vaping and for adjustments at the same time
-Flame suit on-

To me, Just GG is one of most beautiful mechanical mod out there. Why not just keep it as a pure mechanical mod and use Proteus for VV needs. And if we need 18500 or larger VV mod, I am sure Esterigon is much easier to fit with the board.
 

vap0r88

Senior Member
ECF Veteran
Jul 14, 2013
116
61
australia
-Flame suit on-

To me, Just GG is one of most beautiful mechanical mod out there. Why not just keep it as a pure mechanical mod

Because if you want to keep it pure mechanical mod you have a choice to so. But imeo promised before justGG release as a gift for the last mechanical mod he will also let is have electronic option. This is why I buy JGG because of this option! :)
 

Otello

Super Member
ECF Veteran
Verified Member
Nov 11, 2013
371
672
68
Roma - Italy
www.facebook.com
Manni, I see Imeo liked my message, so what I said is correct, I try to explain better. ;)
If you put the circuit under the battery, there will be a direct contact between the battery and atom center post, right?
If you close the circuit (press the button), the battery will be directly connected to the atom, regardless of + or - on center post, so the battery will feed directly the atom.

BTW, there's no law saying the button must be on +.
For instance, Kick is designed to be used with button on negative, with PVs with button on positive the kick continue to feed the circuit even if you do not press the button; not a big waste of battery, but it's definitely better to use the kick with button on negative.

With a circuit like Proteus I think the question is slightly different.
Actually the problem is not the position on the positive or the negative but if the button is on the circuit or if it cut the feeding from the battery (i.e. the classic GG side button).
The problem is caused by the need of sending commands: to receive a command the circuit should be electrically feeded; with the side button you open the electric feed together with sending the command; I'm not sure it may work in a reliable way.
(for the record, it works with Crown chips, bur in a reliable way.... ehm... ;) )
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
kick is a simple circuit that has a potensiometer on it as I see it guys. You put a value on it by a screwdriver and when you press the button it reads the new value and vape with it. Proteus has nothing to do with it.

I hope that I am not wrong about kick but I think it works that way
 
Status
Not open for further replies.

Users who are viewing this thread