With the 28ml glass I managed to get a fill and a half from a 60ml bottle, the base holds a few ml's of juice too. 
I have a problem with Escribe (2.9 sp5.2). Every time I start it Escribe it will upload my settings then the message in the upper left corner next to Escribe Evolv dna 75C (Escribe has stopped responding) then the program will open up. However if I try to change/apply any info and upload settings to device I get the error below. I uninstalled and reinstalled the program, tried a different version of Escribe and tried a different computer...same problem
I have that problem as well. eScribe sets Kanthal to TC in the materials tab you get that error on Upload. The only way around it for me was to delete my Kanthal profile and material and just use the Watts profile from the stock config.
It allows the Upload to go through, but the Wattage profile will sometimes give you a Temp Protection error on a Kanthal build.
I am using 2.0 SP12.
The Aromamizer Titan.
Basically it's a 41mm Plus with a multi-functional deck (Postless, Velocity or Series). Can be configured in Dripper, 18ml or 28ml modes.
I have someone making a wooden case for it so the overhang will be no more.That's even to big for me!Over Hang
I didn't have the ambition to put a PWM into a HoG and the Laisimo F4 has some sketchy QC.
I have someone making a wooden case for it so the overhang will be no more.
I didn't have the ambition to put a PWM into a HoG and the Laisimo F4 has some sketchy QC.
I would have got one or two, If I had a DNA mod for it with no over hang.
Is it better than the Plus?
Yeah I can go several weeks with unflavored in my Aromamizer 25mm
It has a different deck than the plus, it's got those little Lego peices that you can configure how you want.
Yeah, I was about to say, & like TD said that is a kanthal problem, are you trying to use the old workaround for preheat/boost on kanthal? Isn't the replay out yet? I haven't checked bc I have no use for it, but if you're using kanthal it might be worth looking into.
Bingo TrollDragon 
updated to SP12 didn't make any difference as soon as I deleted the Kanthal profile and material all is good. I would never in a million years thought of that. Thanks to you and Kiba and Steamer
updated to SP12 didn't make any difference as soon as I deleted the Kanthal profile and material all is good. I would never in a million years thought of that. Thanks to you and Kiba and Steamer
I think kanthal & nichrome are the only ones with a flat TFR curve, so you would of figured it out.Bingo TrollDragon
It's a bit spendy, but DNA and fits the Titan perfectly with no overhang.
Is it better than the Plus? No it's a novelty juice burner with airflow for days.
It's like pulling air through an old 900CFM race carb.
Major neck beard cred when you stop into the local Clouds Bro Clouds B&M for a show and tell.
I picked one up #BecauseSteamCrave. Steam Crave is coming out with a PWM mod for the Titan and probably the new 30mm Dripper. I'm not interested in their mod, I'd build my own but it should be sweet! You can dial down the airflow to the single holes on the ring, the smallest one whistles, the oval isn't too bad depending on your build, which needs to be huge. I have a pair of 7 wrap 4mm AVS framed staples in mine (they look tiny on the 30mm deck) at 125W and it is a very cloudy/tasty beast!
The Plus to me is SC's trump card, it is a perfect size providing excellent flavor and vapor production. I get tired of constantly filling 4ml tanks, that I rarely use them any more. It would be nice to go back to the days of the Rose V2, I still use one of mine as a stealth MTL rig.
Similar threads
- Locked
