And if you totally give up cutting and coping, cut a piece that is in between...fill gaps and carve away to match !
(BTDT)
(BTDT)
Yeah, I'll fuss and fuss til I know it's the best I can get it, caulk and joint compound to fill the voids then painted to hide it all, that's has been my usual work around LoL.
Well, We knew this wouldn't take long! But maybe didn't expect it this Fast!
2 versions Logo & Logoless $1 cheaper for No logo
ULTON Typhoon GT4 Style 316SS RTA Rebuildable Tank Atomizer 5ml (1:1 with Logo) - Silver
I hope it shows up at FT or 3F soon 2F takes for ever to ship to my location
2 versions Logo & Logoless $1 cheaper for No logo
ULTON Typhoon GT4 Style 316SS RTA Rebuildable Tank Atomizer 5ml (1:1 with Logo) - Silver
I hope it shows up at FT or 3F soon
2F takes for ever to ship to my location 
I can't buy any more tanks that are not steam crave, I got a box full of others that never get used anymore.
For Me it lands on the west coast
Takes as long across Canada as it does from china Extra 5 or 6 days for sure
Got 9 SC units in Rotation
If they put out some thing new? I would be all over it For now I have maxed out SC atty's.
Patiently waiting for the Supreme V3 MTL tank and a few others, they just showed the Glaz 30mm RDA, but I don't need a big RDA.Got 9 SC units in Rotation
For now I have maxed out SC atty's.
I'm on a self imposed 'buying freeze'. Except for about a $100 flavor concentrate order, which can wait till the next sale. Luckily 2 mods on pre-order and they keep delaying the 'ship date'. I don't care, I surely don't need 'em
I decided today to get those hotcig dx battery packs cells pulled back down to 3.80-3.85 volts for storage, vaping on them I plugged them in once in a while to see where the cell voltages were at, once I got down to 3.9 I vaped them while watching and noticed the voltage drop wouldn't sag as much as I expected, about .03-.05 under a load, so I went in and set the cutoff to 3.78, vaped them and let the board shut them down. That worked well, once they were at the cutoff I set them aside for a half hour to let the cells settle and even out, rechecking later they were all right in the 3.80-3.85 range.
Whether my vape settings in TC mode would differ from someone else and that cutoff of 3.78 would work for everyone I'm not sure, but with a little tinkering you should be able to find a cutoff that would get you to that sweet spot for storage.
I'll have to make a note of this which got me thinking, it would be nice if in escribe they could add notepad or wordpad to the drop down Tools menu so you could make notes that you could pull back up right in escribe. Think that's something they could do without much trouble and be useful to folks? Should I post a request on the evolv forum?
Whether my vape settings in TC mode would differ from someone else and that cutoff of 3.78 would work for everyone I'm not sure, but with a little tinkering you should be able to find a cutoff that would get you to that sweet spot for storage.
I'll have to make a note of this which got me thinking, it would be nice if in escribe they could add notepad or wordpad to the drop down Tools menu so you could make notes that you could pull back up right in escribe. Think that's something they could do without much trouble and be useful to folks? Should I post a request on the evolv forum?
If not for the fact that there is no branding on the TGT4 in the above video I would have thought they were showing an authentic one,
Oh, wait a minute, they blacked it out, now I'm back to thinking that it's an authentic.
Oh, wait a minute, they blacked it out, now I'm back to thinking that it's an authentic.
Last edited:
It may very well be? China has been known to use Authentic pictures, lifted from the net to advertise their Clones.
The one in the video might be the Authentic they bought to copy?
BTW "Ulton" is offering Logo & Logoless, Your choice.
That's true, if I remember it correctly, another forum member here had engraved one his atty's, I believe it was with his initials, and it showed up on a china sellers website.
Just my opinion.
No logo = "knock-off", done all over the world, in all industries. I.e. generics.
With logo = Forgery, unethical in most civilized societies
I missed out on getting both the prized Erlkonigin RTA and Apollo RDA "Qorax" branded clones.
All of his gear has his name lasered on it from the factory, its a deal he has with them.Also the OTM Aqua V2 styled RTA's that FT sold came from the same production run as the authentics. The boys kept the CNC's running and just filled boxes that were not headed to Footoon.
Footoon got even though by creating the totally non functional Aqua V3, and they cloned it.
...
Footoon got even though by creating the totally non functional Aqua V3, and they cloned it.
It really doesn't get much better than that.
When I was young, some kids were going to farms and stealing gasoline from the large reserve tanks. One farmer go so tired of it, he filled his tank about a quarter of the way full with a mixture of one-fourth kerosene and three fourths gasoline. The following day the whole town knew who was stealing the gas as he left a cloud of smoke while he belched and backfired his way through town. The thefts ended.
I still don't get it? I made like 12 cuts but it ended up being too small of a space, (like about an inch) for me anyways although I think I did pretty good on the rest of it.Kiba, the only thing that went wrong for you there was skipping the wall corner. The left side of the crown piece over the door should have been an outside cut, then a short piece for the short wall with an outside corner on the right and an inside corner on the left. In other words the crown should always track each and every wall/cabinet plane. The real challenge on those short transition is cutting the inside and outside corners on such a short piece of crown. Essentially it's cut OFF from the end of a long stick of crown and sometimes gets caught in the saw blade as it's cut loose (ruining the piece). Do over. To attach it we drill a pilot hole through the piece so the finish nail doesn't spit it in half. See, easy peasy.
Btw do you know what this is?
Best pic I cold get it's behind the turlet.
Basically, it's hard, looks sort of like someone painted over a slug
Last edited:
Similar threads
- Locked
