Evolv-ing Thread

[TrollDragon]

So funny. Never owned a Goblin or Theorem, but I'll match your Nano and raise with the Serpent SMM. Never got along with those 2.

Edit: And I went 18 days and 120ml's through each of 2 Ammit 25's without a hint of leaking/condensation. All I did was swap the Rayon for Cotton, and my usual Cotton wicking.

Never bothered with the Serpent SMM, after the Theorem I avoided anything with SMM attached to it.

The Serpent RDTA is another semi PoS, noisiest air flow in existence, single cyclops slot to a hard right angle under the coil...

My OG Ammit goes and goes until the char taste is a little too prominent then I change it out.

 

[Steamer861]

Never bothered with the Serpent SMM

You missed out, Mine have a 5mil capacity with the Bubble Glass.
They don't leak or flood, very simple to set up. A must have, IMO

 

[TrollDragon]

You missed out, Mine have a 5mil capacity with the Bubble Glass.
They don't leak or flood, very simple to set up. A must have, IMO

Them's some pretty drip tips!

 

[mikepetro]

Sat down at the bench and finally was changing out bad and glitchy screens on my DNA200 mods (DX200's and ERM's).
One board in a ERM, would not take the changes I made in escribe. I was changing the presets and it just would not take the changes. Changed the board, soldered it all in connected the battery and,,,,,,,,,,,,,,, No connect thru the USB to escribe! or show that it was charging either... Bad USB on the board.

NOW the question, has anyone tried recently to get a board that was picked up in one of the co-ops way, way back RMA'ed? I sent in a request but with not much else to do was wondering if I should spend the time worrying if Evolv will rma the board.

Thanks to the extra boards and screens I got from the co-ops, all devices are ship shape and working flawlessly. DX200 mods will stay DNA200's but the ERM+ will get the 250 boards!

If it was less than a year, and an emailed invoice will be enough for them, then yes, for sure they will honor it. If over a year, maybe.

 

[Steamer861]

My last RMA included a 200 that was for sure over a year old! They replaced it, no questions asked. They didn't even ask any thing about were I had got them or for a receipt I was sending in a few 250's & thought I would ask about the 200, thinking it was old & maybe they wouldn't cover it. They Did

BTW, they asked for a totally stripped down board & no screen included.
They said it was easer for them to test the defective boards if they were clean.
They sent back brand new retail box's with every thing included even new screens

 

[Steamer861]

Them's some pretty drip tips!

There 510, not 810, just look like 810
$3.21 Resin + Stabilized Wood Hybrid 510 Drip Tip - 13mm / random color at FastTech - Worldwide Free Shipping

 

[SlickWilly]

Mike, Have you noticed the neighbor hood is changing? Pretty soon these guys from the dark side will outnumber us.

 

[cigatron]

Luuuuuke, I am your sister's cat's nephew's master's brother in laaaaw.

 

[mikepetro]

Mike, Have you noticed the neighbor hood is changing? Pretty soon these guys from the dark side will outnumber us.

Oh yes, I have noticed, just call me a renegade.......

 

[dwcraig1]

From a couple of days ago, I missed it.

$26.35 SR SRG V4 Styled RTA Rebuildable Tank Atomizer - 5ml / 316 stainless steel + PC / 25mm diameter at FastTech - Worldwide Free Shipping

Note the top o-ring, not used on authentic.

 

[BillW50]

Tony B designed the Pulse 22/&24

Yes the Vapor Trail guy. The physics in how they both work is very similar.

1) Same high air intakes
2) Same channeled airflow to directly underneath the coil(s)
3) Same high mounted coil(s)
4) Same builds work on either
5) Same dual BF juice channeled
6) Same drip tips and options
7) Same wicking works the same
8) Both comes with two different grub screw head options
9) Both are designed not to likely leak
10) Both can be used as a squonker or not
11) Both comes in either 22mm or 24mm sizes
12) Same color options

I dunno, it looks like both Tony and Billy were looking for many of the same things to me.

 

[Steamer861]

From a couple of days ago, I missed it.

$26.35 SR SRG V4 Styled RTA Rebuildable Tank Atomizer - 5ml / 316 stainless steel + PC / 25mm diameter at FastTech - Worldwide Free Shipping

Note the top o-ring, not used on authentic.

The Tank is Plastic! on the clone I think they were getting some Heat from the Original manufacture? I saw a post on Hotcig's web site, stating it's not a 1:1 clone.
Their not Calling it a Tai-Fun IV either.

The Ulton Clone claims 1:1? But they don't specify Glass tank or not?

The one I ordered looks like the pic above, (Hotcig/ShenRay) I'm hoping it's not a POS?
The Plastic tank is a Big! let down right off the hop
It's not cheep $ for a clone $29, some clones sell for $15
Mine hasn't even shipped yet & I'm all ready getting a Bad feeling

 

[SlickWilly]

The Tank is Plastic! on the clone I think they were getting some Heat from the Original manufacture? I saw a post on Hotcig's web site, stating it's not a 1:1 clone.
Their not Calling it a Tai-Fun IV either.

The Ulton Clone claims 1:1? But they don't specify Glass tank or not?

The one I ordered looks like the pic above, (Hotcig/ShenRay) I'm hoping it's not a POS?
The Plastic tank is a Big! let down right off the hop
It's not cheep $ for a clone $29, some clones sell for $15
Mine hasn't even shipped yet & I'm all ready getting a Bad feeling

Do they have replacement tanks? You know you'll end up needing one, if you can't get parts, I'd cancel the order.

 

[Steamer861]

I dunno, it looks like both Tony and Billy were looking for many of the same things to me.

I guess there really isn't to much you can change about a dripper?
For the longest time now most single coil drippers I'v seen have the Hadly/ Narda style deck.
I use low power Reg BF'ers so I'm only interested in Single coil Drippers.
I don't have a Dead Rabbit, or any other dual coil for that matter.

Do they have replacement tanks? You know you'll end up needing one, if you can't get parts, I'd cancel the order.

Nothing So far This mite the instance when I buy an Authentic, If I really like the clone
I would cancel it? If it didn't tick so many of my box's This looks like a tank I'm really going to like!

 

[BillW50]

I guess there really isn't to much you can change about a dripper?
For the longest time now most single coil drippers I'v seen have the Hadly/ Narda style deck.
I use low power Reg BF'ers so I'm only interested in Single coil Drippers.
I don't have a Dead Rabbit, or any other dual coil for that matter.

I believe most that have used both will say the Pulse is the better of the two. The DR used the cheaper way to do it while the Pulse used the more expensive way to do it. Seems like it paid off to me. You can use single coil builds on both 24mm too.

 

[BillW50]

 

[tiburonfirst]

 

[mikepetro]

 

[dwcraig1]

 

[BillW50]