Evolv-ing Thread

[Tpat591]

Does anyone have a source for the post (inverted cup) & spring battery terminals like joyetech & other mod makers are using these days - guess you could call them pogo like connectors without the sealed body. Can't seem to find them after an extensive search.

Know if I could find them I could make a much more compact sled design for some mod designs I'm working on.

 

[tiburonfirst]

 

[tiburonfirst]

Not really a Slovak dish, I will get that when I hit Vienna.

Sent from phone.

smart move! it isn't called 'wiener schnitzel' for nothing!

but what about that culinary polish specialty you were lusting after? haven't heard a single word

 

[awsum140]

As a matter of fact, YES!

Vienna is the only redeeming part of this trip.

The project itself amounts to making Chicken Salad out of Chicken Sh@%$.

Sent from phone.

Been there, done that, too often!

Enjoy Vienna!

 

[tiburonfirst]

Enjoy Vienna!

where's that?
and how did this ever get started? there should be a law against changing a city's name! i don't see it being done by europeans no matter how awkward an american city's name is for their tongues!

 

[mikepetro]

Hey, not my chopping for, that's what it says on my ticket.

Sent from phone.

 

[tiburonfirst]

but what about that culinary polish specialty you were lusting after? haven't heard a single word

still waiting!

 

[mikepetro]

still waiting!

Meh...... [emoji22]

Sent from phone.

 

[BillW50]

Does anyone have a source for the post (inverted cup) & spring battery terminals like Joyetech & other mod makers are using these days - guess you could call them pogo like connectors without the sealed body. Can't seem to find them after an extensive search.

Oh man! I find them everywhere. A bit pricey for a sled though, about 40 bucks shipped. Plus you get that hard to find square Joyetech/Wismec 510 connector that nobody can find as an individual part. I bet you could sell that off for an easy 15 bucks.

 

[tiburonfirst]

Meh...... [emoji22]

Sent from phone.

 

[tiburonfirst]

btw if you like mushrooms try a 'Jäger Schnitzel' - with the 'Wiener Schnitzel' be sure to use the offered slice of lemon!

 

[Tpat591]

Oh man! I find them everywhere. A bit pricey for a sled though, about 40 bucks shipped. Plus you get that hard to find square Joyetech/Wismec 510 connector that nobody can find as an individual part. I bet you could sell that off for an easy 15 bucks.

You got links? All I am looking for is the + & - posts & spring. Not the whole sled. It is my intention to incorporate them into a 3d printed designed sled.

 

[BillW50]

@Tpat591: Links? I am talking about buying RX200s and stripping them for parts. You get your springs and posts for free and make 5 bucks for your trouble.

RX200 cost $40
Joyetech 510 worth $15
RX200 board worth $15
RX200 casing worth $15

 

[mikepetro]

Omg, this little Burg (Vienna) is like way cool!

Sent from phone.

 

[Tpat591]

@Tpat591: Links? I am talking about buying RX200s and stripping them for parts. You get your springs and posts for free and make 5 bucks for your trouble.

RX200 cost $40
Joyetech 510 worth $15
RX200 board worth $15
RX200 casing worth $15

Misunderstood your intent on first reading. Your humor does seem more obvious now upon rereading it. Hazards or staying up all night. Sorry.

 

[tiburonfirst]

Omg, this little Burg (Vienna) is like way cool!

Sent from phone.

? ?? population = ~ 1.7 million

told you so!

 

[tiburonfirst]

Wien!

 

[Alexander Mundy]

Does anyone have a source for the post (inverted cup) & spring battery terminals like Joyetech & other mod makers are using these days - guess you could call them pogo like connectors without the sealed body. Can't seem to find them after an extensive search.

View attachment 550260View attachment 550261View attachment 550262View attachment 550263

Know if I could find them I could make a much more compact sled design for some mod designs I'm working on.

While not the material you are looking for (Zink plated steel), except for the additional retaining bits those are a spitting image for push on axle cap nuts.

Did a quick Google for brass or copper and came up nil. Did find some "flare bonnets" in copper though that I wouldn't think would take much to reshape and in various sizes.

Pipe Tubing Fittings Clamps

Well, got to get back to the grindstone now.

 

[Tpat591]

While not the material you are looking for (Zink plated steel), except for the additional retaining bits those are a spitting image for push on axle cap nuts.

Did a quick Google for brass or copper and came up nil. Did find some "flare bonnets" in copper though that I wouldn't think would take much to reshape and in various sizes.

Pipe Tubing Fittings Clamps

Well, got to get back to the grindstone now.

Flare bonnets could do the trick, but I'd probably feel better about them not binding if the sides were more vertical rather than sloped. You think the axle caps would limit conductivity too much? Great thinking outside the box! Thanks Mr. Mundy!

Was toying with 10-24 Brass acorn nuts myself, but didn't think the nipple was big enough in relation to the bulk.

 

[mikepetro]

Wien!

I don't do alcohol.

Sent from my SM-T810 using Tapatalk