Evolv-ing Thread

[Steamer861]

I got mine from 3F this one http://www.3fvape.com/search?controller=search&orderby=position&orderway=desc&search_query=SJMY+SQX+X+Dream+Style+RTA+Rebuildable+Tank+Atomizer+-+Silver,+316+Stainless+Steel,+22mm+Diameter,+4ml
I did have a hard time clicking the bottom on once, I adjusted the coated piece that is stuck up in the atty. I don't why it was tight but taking that piece out & putting it back in did the trick.
It clicks pretty nicely now. I'm using a single coil

 

[mikepetro]

Off topic, but not really, the sentiment fits our current situation quite well.......
This gives me a chill every time I watch it. It really is worth a view (all the way through).

 

[Phone Guy]

Nice looking mod......

You like that? I know a guy!

 

[TruckerMSA]

Sent from The Truck O shop

 

[Steamer861]

The Truckers back! Whats the scoop on the Starplat chip? Inquiring minds want to know

 

[TruckerMSA]

The Truckers back! Whats the scoop on the Starplat chip? Inquiring minds want to know

It's small. Havnt built a mod yet but working on it.


Sent from The Truck O Shop

 

[Phone Guy]

I got mine from 3F this one http://www.3fvape.com/search?controller=search&orderby=position&orderway=desc&search_query=SJMY+SQX+X+Dream+Style+RTA+Rebuildable+Tank+Atomizer+-+Silver,+316+Stainless+Steel,+22mm+Diameter,+4ml
I did have a hard time clicking the bottom on once, I readjusted the coated piece that is stuck up in the atty. I don't why it was tight but taking that piece out & putting it back in did the trick.
It clicks pretty nicely now. I'm using a single coil

Your base deck looks to be seated about the same as mine...slight gap.

So you removed and replaced your upper "ematel" coated piece and that made it twist better...? Well I'll try that when I get home. I read on another review post (maybe 3f? not sure now) the guy had to sand the 3 metal tabs a little to fit...? I know I'm comparing the authentic to clones, which I'm not trying to do, but the video's I've seen show the base twisting with EASE... mine needs tools to twist.

Thank you @Steamer861 for the quick reply and pictures. I appreciate it.

On a side note of the Squape X... It does provide a nice vape, I like the draw... its that slightly restricted lung type draw, not like the aromamizer or griffin that are too open, and not as tight as the Taifun GT2. No noise or whistle which is SO NICE. Small drip tip, also nice. I've been vaping 80vg juice and its feeding like a champ. I don't know if it leaks yet, but I'm assuming if you left it on it's side it would leak - like the aromamizer does. Standing straight up, no leaks yet... I filled it before bed last night, put a paper towel around it and left it standing in the stand all night and no leaks. Pretty decent for $30 IMHO. (except for the force required to twist the base issue I'm having)

 

[SlickWilly]

Need to get vape bands made that say "FUFDA"

After Cuomo passed the "SAFE" Act banning future sales of AR15's and having to register any you had prior to the bill unless you made them compliant to the law, a guy had these dust covers made for AR's.
This is the engraving shown when the cover is closed

And this once it's open.

The law failed miserably, only a very small percentage of people registered their rifles and soon after manufactures figured out how to make AR's NY Compliant. They are being sold in almost every gun store, even the sporting chain stores sell them. There's always more then one way to beat the man......

 

[Steamer861]

Have to agree Bud I like mine to It vapes nice, good build quality, nice air flow, no leaking here yet I know with old SQuape Clones after awhile the coating failed & the ohms jump all over I hope this one Don't do that.

 

[Phone Guy]

Have to agree Bud I like mine to It vapes nice, good build quality, nice air flow, no leaking here yet I know with old SQuape Clones after awhile the coating failed & the ohms jump all over I hope this one Don't do that.

My Squape R came from FastTech I think, and never gave me any issues before being retired. Once I got the wicking down it vaped pretty good at the time, the issue with the Squape R was user error... not wicking it just right and it would leak or not feed... it was hard (for me) to get it just right consistently. I'm pretty sure I used it with Ni200 on my DNA40? Can't remember now. (fwiw it was the logo'less version)

But I agree, I hope I can iron out the issues with the Squape X because as it stands, I can't fill it when not home because I can't twist the base with my bare hands. Filling it in the vape position flooded it a little, but I vaped through the flooding and it seems to be fine.

 

[TruckerMSA]

Found a pic of the first mod I made. Has the. SX350 60w chip in it. It's a beast. Nicknamed "the coffin mod"

Here's a pic of the first 3 mods I've made.

Sent from The Truck O Shop

 

[Phone Guy]

@KTMRider I was going to PM you, but thought others might be interested too... since its only a few of us active in this thread... what flavors did you get from fuggin vapor? you mentioned you liked them and would order again, I looked and only saw a couple that might interest me... (cinnamon churro, strawberry cheesecake and another one I can't remember right now)

 

[KTMRider]

@KTMRider I was going to PM you, but thought others might be interested too... since its only a few of us active in this thread... what flavors did you get from fuggin vapor? you mentioned you liked them and would order again, I looked and only saw a couple that might interest me... (cinnamon churro, strawberry cheesecake and another one I can't remember right now)

I got Rainbow Road, CheeBerry (strawberry cheesecake), Raspy Lemonade, Berry Crunchy and Shake Dat As5.

I've only tried CheeBerry, Raspy Lemonade and Berry Crunchy.

I've tried so many strawberry cheesecake/shortcake flavors and Vaporshark had the best. CheeBerry is up there with the best I've tried. It's more cheesecake with a strawberry after taste and it's really good.

Raspy Lemonade is really tasty and I'd recommend it to anyone that likes fruit flavors. I've been vaping this almost daily since I got it.

Berry Crunchy isn't as sweet as Dr Juice's Crunchberry but it's still pretty good. Not sure I'd order more though.

I only opened Rainbow Road and SDA to smell it and I really like how they smell. SDA smells like White Label Juice Co's Strawberry Cheesecake.

I would definitely order Raspy Lemonade and CheeBerry again. Rainbow Road smells promising.

 

[Phone Guy]

I got Rainbow Road, CheeBerry (strawberry cheesecake), Raspy Lemonade, Berry Crunchy and Shake Dat As5.

I've only tried CheeBerry, Raspy Lemonade and Berry Crunchy.

I've tried so many strawberry cheesecake/shortcake flavors and Vaporshark had the best. CheeBerry is up there with the best I've tried. It's more cheesecake with a strawberry after taste and it's really good.

Raspy Lemonade is really tasty and I'd recommend it to anyone that likes fruit flavors. I've been vaping this almost daily since I got it.

Berry Crunchy isn't as sweet as Dr Juice's Crunchberry but it's still pretty good. Not sure I'd order more though.

I only opened Rainbow Road and SDA to smell it and I really like how they smell. SDA smells like White Label Juice Co's Strawberry Cheesecake.

I would definitely order Raspy Lemonade and CheeBerry again. Rainbow Road smells promising.

Awesome, thank you for the input.

 

[Steamer861]

It looks like the Kay-Fun v5 clones are starting to roll out
$24.00 SXK Kayfun V5 Styled RTA Rebuildable Tank Atomizer - 5ml / 316 stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping
Kayfun V5 Style RTA 22mm 4ml Silver Rebuildable Tank Atomizer
I have all ways been a K-F fan Lately my vaping style has become different than what a traditional K-F usually offers. This new one is suppose to have way better Air flow ?
All thou I would like an Original IDK for sure I will like it enough, So I will opt for a clone instead.
3F has become my choice for Chinese orders as of late, for me to Canada they still offer E-Packet & my last order got here fast! Past experience has shown me that SXK/Infinite make a good product.

 

[tiburonfirst]

 

[awsum140]

Great concept, Trucker! A box mod with the advantages of a low tank, atomizer support. Nice work as well, looks great!

 

[BlueridgeDog]

Pages and pages to catch up on...wow. RL has been hectic lately with travel the last six weeks.

On a related note, I am considering a VT75...when they are out enough to get.

Also...my bride's FDA strategy is "I want to quit soon enough anyway". Says the gal that is down to 8mg from where we started (36!).

 

[dwcraig1]

Just posted on FT, Innokin Coolfire 4, is this mod using Evolv technology?
$46.95 Authentic Innokin Cool Fire IV 100W 3300mAh TC VW APV Mod - 150-315'C(300-600'F) at FastTech - Worldwide Free Shipping
Innokin also has a 75 watt 18650 model out as well.

 

[Tpat591]

Evolv used to manufacture their boards but I thought that relationship broke down