I thought that I knew all key presses to access different things on a dna. But the Theme Designer shows one that I never seen before. It says Hold to Change Boost. Really? You can change boost on a DNA60, 75, 200, and 250 without EScribe?
I suppose you have to scope out Facebook for this stuff, eh?Handy accessories...
Ultem boro window.
I have two, a plain one like below and one with tackle engraved on it. (Albert is a funny guy.)
I've been looking online for these.
Full Ultem Boro's? How about an all Ultem BB?What would be nice is one of the full Ultem boro's with the little fill plugs.
So to yak a bit more about these BB's.
If you think about it, both BBV (OG manufacturer), and Friendly flipper are mainly hardware oriented. Having said that, the escribe configurations for both are IMHO distinctly average.
The OG has like 'tank 1-6', and a woot profile (everything set to max). Decent startup logo, and a cute dinosaur for the secondary. 4 standard material profiles, and all evolv defaults.
The FF version bring you pictures for each Profile, a JG logo, and littered with more materials. About 3 or 4 for SS (standard evolv and Jaquith's), all the 'sweet spot' Ti02 images and material files, and the internal mod res set at .08, yup .08.
The SXK came bare bones evolv defaults.
In the past I always pre-tested everything on my 75 before moving to the BB.
@Steamer861 Did your 2018 come any different, like their 2018 logo on a screen?
If you think about it, both BBV (OG manufacturer), and Friendly flipper are mainly hardware oriented. Having said that, the escribe configurations for both are IMHO distinctly average.
The OG has like 'tank 1-6', and a woot profile (everything set to max). Decent startup logo, and a cute dinosaur for the secondary. 4 standard material profiles, and all evolv defaults.
The FF version bring you pictures for each Profile, a JG logo, and littered with more materials. About 3 or 4 for SS (standard evolv and Jaquith's), all the 'sweet spot' Ti02 images and material files, and the internal mod res set at .08, yup .08.
The SXK came bare bones evolv defaults.
In the past I always pre-tested everything on my 75 before moving to the BB.
@Steamer861 Did your 2018 come any different, like their 2018 logo on a screen?
6 to 8 bills. LOL. friendlyflipper.com, but I think you need FB to let you know when they restock. ecigarettes.ca <- albert had some of the condensation plugs, and glass with more than an anchor. Some had a Richard imprint (remember back to Willy's comments a few months back).
Yes??? And the key combo to do so? I tried every one I can think of and I haven't guessed it yet. Even the DNA60 manual doesn't mention it.
Those ultem bits came with my BB from ecigarettes.ca
BB VAPES BRVND
The Ultem BB is sweet but I'd rather have a BAM Ultem squonker for that kind of money.
When I find myself in this situation, I just buy both.The Ultem BB is sweet but I'd rather have a BAM Ultem squonker for that kind of money.
International software installed
Punch enabled in a non TC profile
Boost Punch -> Go to that non TC profile. Lock mod (click 5x). Hold + and - minus at the same time. Then up or down. 1-11, proportional for 1 second. Unlock mod.
It’s a 1 second boost, proportional, like on TC
Thank you much Wayneo.
Well it isn't a permanent vape budget. I have a feeling I am going to need a new roof soon. Then I'll be likely have to use the vape budget to pay for it.I don't have your vape budget good sir!
My Authentic came with the same as yours, home screen just says Billet Box then Doug Dino. A lot of Ni profiles, pretty lame
The clones came with Stock Evolv profile but screen orientation was upside down. Mine have not been connected in quite some time, some changes need to be made soon. that screen lead is a PIA Testing on the 75 or another 60 is a great Idea
T/YSpeaking of clone BBs, Anybody have one of those YFTK clones? Are they any good?
You really expect manuals to be updated after the factEven the DNA60 manual doesn't mention it.
My OG said BilletBox but in very thin lettering. I made that one I posted. And the Doug Dino was on either side of the dinosaur. I replaced Doug with 'DNA' and Dino with '60'
BUT there is also Titanium and SS loaded on them.A lot of Ni profiles, pretty lame
Profiles 5-8 are all for Temp Control (starting at Low Preheat is 5). Although they all default to Nickel, there is a key sequence to change the 'material' type once you're in a TC profile
Go to profile of your choice showing Nickel. Lock mod with fire button then all 3 buttons at the same time. It'll show 'hold to change material' .... fire button when you're on material you want, unlock mod.
Well Evolv is out of Fullymax 900's so I was going to ad one to my order at Protovapor.....till I seen their "new" price of $39.95.
So I ordered one of those DIY Hana kits from Ebay and hoping the included battery is a good one. My Hotcig's 2nd battery is going to join it's other one in the hazardous recycle bin (swollen) no shame, kind of old now.
Also I'm entertaining the idea of removing the board from the DX200 and placing it into the Hana box.
Edit: $35.99 not $39.95 (at Protovapor)
So I ordered one of those DIY Hana kits from Ebay and hoping the included battery is a good one. My Hotcig's 2nd battery is going to join it's other one in the hazardous recycle bin (swollen) no shame, kind of old now.
Also I'm entertaining the idea of removing the board from the DX200 and placing it into the Hana box.
Edit: $35.99 not $39.95 (at Protovapor)
Last edited:
Wouldn't be a bad idea, the Hana is smaller & has a better 510!
Similar threads
- Locked
