• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Fasttech Veterans

Status
Not open for further replies.

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
There are two discounts/special prices available at Cloudhouse on MBV & Coval until Wednesday (after the contest info) -I just read this at Reddit:

Hello again! I was just sitting here, vaping from four mods at once (in my usual way), when it occurred to me that I really need to do a Coval giveaway. So I am giving away a grand prize of 300ml of Coval juice (that's 10 bottles). In addition, two people will each 150ml of Coval. I will also be sending out a whole bunch of Coval stickers, so if you are interested in receiving one of those you should let it be known in your post.

All you need to do is post here letting me know that you want to enter, and list at least one Coval flavor that we don't currently carry. This will help me decide what to add to the next order. You can see the list of flavors that we carry here.

You must be a resident of a European nation to enter. The one exception is if you currently live in Antarctica, since I have never had the privilege of shipping to Antarctica. One entry per person, and you have to post a flavor. Lazy vapers need not apply. Winners will be selected at the end of the day on Wednesday and notified via PM and a post on ecr.eu.

I am also running a 15% off coupon on all Coval flavors through the end of the contest, so use coupon code " covalcontest " to get your glorious 15% off.

Thanks for your support, and good luck!

EDIT: I also just set a flash sale. For the next 24 hours all MBV sampler and value packs are on sale. 5x5ml samplers for 10 euro, 5x20ml samplers for 25 euro, 5x30ml samplers for 33 euro, and 5x50ml samplers for 55 euro. I am in a mood for sales!
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
VTC4's arrived.Ecolux really are super quick.Highly recommend them.

depending on the charger you have, but if it is a 4 port and you are going to use them in the Sig or VF then always charge using the matched ports, for balanced charging, so slots 1&3 or 2&4 and always keep them together and another good practice is to swap position in the mod, so that the one on the left gets put in on the right next time and vv.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
I never record anything anymore, don't even know how to now. Most of my stuff is downloaded, and I've downloaded Ascention the other week, but not watched it.

It`s only done through the sky box dave :)

In that case will wait ... but it is another weird one ... think Area 51

Cheers bob, sounds like i may enjoy that with it being weird :laugh: So it`s a bit alien-ish eh. :)

:cool: My Flask has shipped :cool:

Mine is now showing as `in transit` as yours will be tomorrow george :laugh:

Saucy minx :p

:laugh:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Well my sig arrived today, and i am just charging some effests to use in it later,and as mentioned earlier my flask is in transit. The one i am stoked about though is FT have now shipped my V4`s. Yee - Haaaaaaa :toast:
 
Last edited:

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
Cheers bob, sounds like i may enjoy that with it being weird :laugh: So it`s a bit alien-ish eh. :)

No Aliens, think of other stuff out of Area 51 - I cottoned on to what it was about, halfway through the first episode, but then strange things start happening, and that's all I'm saying.



Mine is now showing as `in transit` as yours will be tomorrow george :laugh:



:laugh:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Well my sig arrived today, and i am just charging some effests to use in it later,and as mentioned earlier my flask is in transit. The one i am stoked about though is FT have now shipped my V4`s. Yee - Haaaaaaa :toast:

Think the VF now has wings, and FT tells me my T8 and 2 Lemo Drops have shipped
 

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
I got the dreaded "Restocking" today,ordered a black Lemo Drop which i thought would be the one that held the order up.Nope.that and two other items are now been held up by that Erlkonigbob nano thing.Which they reckon will be ready on 31/01/14.Isn't that the day after the holidays start?

On my 3rd tank in the V4 now Terry,no probs.But i think ideally i could do with the wider air flow tube they sell.Think the Lemos have got me too used to a loose draw.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
I got the dreaded "Restocking" today,ordered a black Lemo Drop which i thought would be the one that held the order up.Nope.that and two other items are now been held up by that Erlkonigbob nano thing.Which they reckon will be ready on 31/01/14.Isn't that the day after the holidays start?

On my 3rd tank in the V4 now Terry,no probs.But i think ideally i could do with the wider air flow tube they sell.Think the Lemos have got me too used to a loose draw.

Took 5 days from restocking on mine to shipped today

Update on the Cloupor Mini (mine still going okay with no problems)

Taste Your Juice | Cloupor Mini – Heats… ah I mean… Heads Up

and some stuff you didn't know but do now you've been vaping a while :)

Vaping: What They Didn't Tell You | Guide To Vaping
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
I got the dreaded "Restocking" today,ordered a black Lemo Drop which i thought would be the one that held the order up.Nope.that and two other items are now been held up by that Erlkonigbob nano thing.Which they reckon will be ready on 31/01/14.Isn't that the day after the holidays start?

On my 3rd tank in the V4 now Terry,no probs.But i think ideally i could do with the wider air flow tube they sell.Think the Lemos have got me too used to a loose draw.

Took 5 days from restocking on mine to shipped today

Update on the Cloupor Mini (mine still going okay with no problems)

Taste Your Juice | Cloupor Mini – Heats… ah I mean… Heads Up

and some stuff you didn't know but do now you've been vaping a while :)

Vaping: What They Didn't Tell You | Guide To Vaping

EDIT: That was an ECF double post - nowt to do with me.
 
Last edited:

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
It`s only done through the sky box dave :)
I still use a Sony HDD! :)


Update on the Cloupor Mini (mine still going okay with no problems)

Taste Your Juice | Cloupor Mini – Heats… ah I mean… Heads Up
Hmm - so what's the general feeling about these - I'm keeping mine in sight where I can pick it up now and then to check that it's still cold.
I think these should be recalled because it's not so much a possible failure, more a potential disaster!

and some stuff you didn't know but do now you've been vaping a while :)

Vaping: What They Didn't Tell You | Guide To Vaping
Tip of the iceberg :laugh:

EDIT: That was an ECF double post - nowt to do with me.
Whoo! Ghosts in the machine! :rolleyes:
 

dw117

Super Member
ECF Veteran
Jul 10, 2014
857
1,324
Kernow
Took 5 days from restocking on mine to shipped today

Update on the Cloupor Mini (mine still going okay with no problems)

Taste Your Juice | Cloupor Mini – Heats… ah I mean… Heads Up

and some stuff you didn't know but do now you've been vaping a while :)

Vaping: What They Didn't Tell You | Guide To Vaping

EDIT: That was an ECF double post - nowt to do with me.
I'm kinda regretting ordering one now. It's dispatched from China now though so not sure what to do about it when it arrives...
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
I'm kinda regretting ordering one now. It's dispatched from China now though so not sure what to do about it when it arrives...

Well, mine is still going okay, with a 1.73ohm KF build @ 15w and it's now halfway through the second battery, so I'm not too worried at the moment, but I am keeping an eye on it.

Phil has just put out his 1st video of his trip to China, this is of the Innokin factory - warning it's 1 hour 7 minutes long but shows the whole factory from start to finish and worth watching:

 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
Hmm - so what's the general feeling about these - I'm keeping mine in sight where I can pick it up now and then to check that it's still cold.
I think these should be recalled because it's not so much a possible failure, more a potential disaster!

This may be the nail in the coffin for Cloupor - they were already in trouble after the fiasco of the T5, then the T6 & T8 turned out to be under-powered and lots of peeps decided to cancel their orders - again I have had no problems with the T8 and have just had a 2nd one ship from FT.

They were hoping that the Mini was going to be the saviour of the company, but with these problems it appears they could go out of business.

Latest talk on AAEC is that it could be the white/clear glue that is causing problems as someone took theirs apart and the glue was sticking to the back of the electronics cover (which it shouldn't do) and it was of a rubbery texture, most others I have seen the glue is much more harder, so it has been suggested to remove the glue from the cover and behind the board where the up/+ button is and then use sugru or super glue to seal the cover back on.
 

dw117

Super Member
ECF Veteran
Jul 10, 2014
857
1,324
Kernow
Well, mine is still going okay, with a 1.73ohm KF build @ 15w and it's now halfway through the second battery, so I'm not too worried at the moment, but I am keeping an eye on it.

Phil has just put out his 1st video of his trip to China, this is of the Innokin factory - warning it's 1 hour 7 minutes long but shows the whole factory from start to finish and worth watching:


Haha I started watching that and got bored bit might go back to it.

More interested in his footage at kanger or aspire than innokin.
 

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
Something I posted a couple of weeks ago:

I was reading something in a thread last night about Inawerashop Molinberry which it seems is something different - but only comes in 100ml bottles unless you can get a sample from them! I saw a few good sounding flavours: Peach Nectar and Creamy Vanilla plus some others.
I want a really well flavoured peach that doesn't have that icky taste! http://www.e-cigarette-forum.com/forum/diy-e-liquid/638579-molinberry-products-inawerashop.html

Today, I see Chefs have a small selection of the Molin Berry flavouring, and in small size bottles too. I'll be trying the Creamy Vanilla - pity there's none of the peach one, but perhaps they'll get more in time :) https://www.chefsvapour.co.uk/63-molin-berry

I also see that Inawerashop - the place that sells Molinberry, also has ready to use nicotine bases in all types at reasonable prices, and the shipping is very reasonable too. Molinberry, Inawera Shop, The Best E-Liquids, Flavours, Bases And Many More!

Plus, there's the place that sells Inawera: Flavouring, bases etc. Inawera Flavours - Inawera Flavors
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Evenin' all.

These Kuro coilers are bloody brilliant. Did 6 tanks today - Lemo, Rose, RM2 and 3 Kayfuns.

No more torching the wire before hand, no more torching coils after I've wrapped them on a drillbit. Takes literally seconds to make a superb micro coil. Decided to use up some of my 26g kanthal for all of the tanks, not used it much recently. The tension of the coils are spot on, I really am impressed with these coilers. Didn't even bother trying the twisted wire I spun up last week. It now takes longer to clean out the tank than it does to set coil and wick them :D

If anyone is thinking about getting some and you're worried about the "ships in X days" thing - I can honestly say their worth the wait :)

The only downside to today is I overwicked the Rose and it flooded on me. Cos it's such a fiddly bugger to work on, it's in my "to do box" for another day.

---------------------------

The juices from Spiritus arrived too - not even opened them yet, was too busy playing with the coilers.
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Something I posted a couple of weeks ago:



Today, I see Chefs have a small selection of the Molin Berry flavouring, and in small size bottles too. I'll be trying the Creamy Vanilla - pity there's none of the peach one, but perhaps they'll get more in time :) https://www.chefsvapour.co.uk/63-molin-berry

I also see that Inawerashop - the place that sells Molinberry, also has ready to use nicotine bases in all types at reasonable prices, and the shipping is very reasonable too. Molinberry, Inawera Shop, The Best E-Liquids, Flavours, Bases And Many More!

Plus, there's the place that sells Inawera: Flavouring, bases etc. Inawera Flavours - Inawera Flavors

Inawera do some superb flavours at bargain prices Trisha - I've got quite a few of them. Their very, very concentrated, so a little goes a very long way. I've only ordered direct from them once, but they were really quick on shipping too. The times before when I got their concentrates, it was from UK sources.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
No Aliens, think of other stuff out of Area 51 - I cottoned on to what it was about, halfway through the first episode, but then strange things start happening, and that's all I'm saying.





Think the VF now has wings, and FT tells me my T8 and 2 Lemo Drops have shipped

Happy days bob :) Still not sure what to think now RE: Area 51, but i will get to grips with it :laugh:

On my 3rd tank in the V4 now Terry,no probs.But i think ideally i could do with the wider air flow tube they sell.Think the Lemos have got me too used to a loose draw.

Good to hear george, the air flow was the only thing putting me off them in the first place ! But as you say, if it`s a bit too tight you can always upgrade to the wider tube :) I know i will.

I`m loving everything about this 100 plus as well ! This afternoon i stripped a lemo, and noticed it was the only one which still had the stock coil in. So i ripped that out and thought i would try something a bit different, so i made a 28 awg coil 6 wraps @ 3mm 1.4 ohms, but what i did slightly different was not torch it into a micro.

After wrapping the coil, i installed it then pulsed it while gently squeezing the wraps together, so there is a tiny space between each wrap.put some rayon in, split the tails in two, primed it filled up with captain custard, and had a toot. Now it`s only my opinion, but the Lemo absolutely loves this build, i have now got it on the sig @ 20 watts, and the flavour/vapour i am now getting is absolutely awesome, and it`s the best vape i have had out of all five of them.

So to conclude, i reckon the Lemos prefer a wider surface area build ( spaced coils ) and i have got four more what need doing now :laugh:
 
Status
Not open for further replies.

Users who are viewing this thread