Fasttech Veterans

[Pictor]

I was actually thinking that the other day, when you mentioned how much you were vaping, and even started doing a reply, but it just didn't sound right and decided against it, I have noticed that since I dropped from 18 to 12 to 6 I am now vaping more, but as my craving has disappeared I try to keep mine to a minimum, but you smoked almost a third more ciggies than I did, and was wondering if it is the volume of juice that is causing the problems rather than the juice itself or even the PG/VG, try going back up to 12mg (1.2%) on say 1 juice that you like most of (CVs MCV) but still use 6mg on the others, see if it makes any difference, and if it does, then you can try say 2 juices at a time in the higher nic.

Yes, I've been aware for a while that because of the equipment, I'm using a lot more - since I got tanks that use more (remember when I got the Unitanks and PT's - I said I could see the liquid going down faster?) - then onto higher powered batteries such as spinner ll's, iPow's, MVP2's, and now iSticks ..with MOW and mini Nautilus tanks ...they all add up on the liquid consumption, and that adds more PG especially. Add a couple of small amounts of flavours that irritate and more VG that congests and I've got problems.

I've got lots of NT ones that are 18mg but can't use them as the PG in them still gives me problems even using them at 20% with 80% of a zero!

I'll try getting some 12mg MCV and Doughnut, but only mix them in with some of my .6 to make .9 - see how that goes. I have been making a bigger effort to never inhale though ..that's why I've got a sore nose !

It's a shame because I was wanting to get down to zero before the middle of the year if I could but it looks like I can't ...unless I try some patches or even SNUS ..but don't fancy chewing little teabags!

I have a suspicion that if they didn't taste so nice, I wouldn't use it so much! ...but then I'd likely start eating stuff! Definitely don't want to put weight on!

 

[dw117]

A Chinese company is claiming that it is about to launch a mod with temperature control for any coil !!!

I'll believe it when I see it. If Evolv had to go down the Ni200 wire route to achieve it I don't see anyone managing with regular kanthal for now.

The 50 is a little bit taller and it's wider, and the buttons are in a different position. Size: 23.0mm * 45.0 mm * 83.0mm: iStick 50W (4400mAh)
The 30W isn't too different - Size: 23.0mm * 32.5 mm * 77.0mm. Biggest difference after the wattage is the top is a slightly different shape to accommodate wider tanks etc. up to 23mm and a spring connector: iStick 30W

It says welcome to pre-order on this page, but I don't see where! iSmoka/Eleaf electronic cigarette

I see there's a 'Melo' atomiser now ...not a typo, just a Lemo's brother!

The Melo looks like it has prebuilt vertical coil heads aka the Aspire Atlantis, a sort of Lemo Drop for non-coil builders, like to 50w iStick, hope they have sorted out the power so that it is RMS not Mean - looks like they have made the 510 better.

Agreed, If they have a proper flat signal then these would be great. I think either way they will sell truckloads.

The oldest bike I've been a passenger on, was an old Norton. The guy had rebuilt it himself, done a fantastic job too. But my backside was numb by the time I got off it

What kind of ohms was it?

Ooopppsss, just set the fire alarm off, was trying out the Kingslayer in my Doge 0.26ohm dual coil, and what a lovely vape, clouds galore, took a look at the coils and they were well gunked up from the previous juice, so tried to dry the cotton out and it caught light, our fire alarm is connected to the council (because of the missus) so it automatically calls them on a speaker thingy - had to tell them it was a false alarm

After I started using RDAs I would set off our fire alarm so now the one in the living room has a plastic bag held over it with a rubber band during the day. I usually remember to take it off overnight though.

I managed to set it off the other day even though it has a bag over it which was weird, unless the vapour had gone out through the closed door to the one in the hallway.

 

[vince01]

The M50 clearo on FT looks handy for out and about on an ego type battery

afc and changeable drip tip, no replacement coils listed yet though

if anybody is going to have a look could they let me know if the coils

look like some already available ? TIA

 

[Brynglas]

The M50 clearo on FT looks handy for out and about on an ego type battery

afc and changeable drip tip, no replacement coils listed yet though

if anybody is going to have a look could they let me know if the coils

look like some already available ? TIA

Coils in the pics don't look familar Vince.
But it looks as if the Aspire BVC(non nautilus)may fit.If so,they are a good little coil.I sometimes use them in a mini Davide,i take out and about.

 

[Pictor]

The M50 clearo on FT looks handy for out and about on an ego type battery
afc and changeable drip tip, no replacement coils listed yet though
if anybody is going to have a look could they let me know if the coils
look like some already available ? TIA

The tank itself isn't too different from the Aspire ET-S - I've got one but not used it yet, and as George says, the coil is very similar:
$6.12 Authentic Aspire ET-S BDC Bottom Dual Coil Clearomizer - 3.0ml / 1.8ohm at FastTech - Worldwide Free Shipping

 

[Brynglas]

Looks like the release date for the 30&50W isticks is the 25 of this month.That's in the U.S,we'll probably be behind that date.

 

[Pictor]

Looks like the release date for the 30&50W isticks is the 25 of this month.That's in the U.S,we'll probably be behind that date.

Yes, that's what I heard yesterday - I said at the time we'll be best just believing it when we see it here

 

[Pictor]

I just got a despatch email from FT and was surprised because the only two items I had on order are a MOW tank with 5 days showing to 'in stock' and the Cloupor mini 30W with 20 days for 'in stock' showing.

Well, those are the two items that have apparently been despatched today! :

 

[Brynglas]

Yes, that's what I heard yesterday - I said at the time we'll be best just believing it when we see it here

I've found one listing for the 30w device in the U.K,it's on pre-order and it's pennies shy of £40.
I quite fancy a 50W but based on that i'll wait for our friends at F.T to carry stock.
(Sorry Trish, must have missed your post)

 

[Pictor]

I've found one listing for the 30w device in the U.K,it's on pre-order and it's pennies shy of £40.
I quite fancy a 50W but based on that i'll wait for our friends at F.T to carry stock.

That's about what many sellers were charging for the first shipments of the one we have now ...some charged more!
It did take quite a time from them appearing in the US to the retailers here getting any, and especially at a decent price. Think I got my first one at around £32 from Ireland.
Unless they've sorted out the power output I doubt if I'd get a 30W but could be tempted by one of the 50W purely for the battery time between charges. The 30W would be very little advantage for me otherwise - I'm used to the variation in power output, my tanks fit on them well and the battery power is the same.
If the power output is true ..then I may think again!

(Sorry Trish, must have missed your post)

Not a problem - point is, Jan 25th (if they do get released in the US then) could be weeks away from us getting any here, and perhaps a couple more weeks for FT to get them - still, at least by then, there should be a fair number of user reviews for them!
A lot of things seem to get delays with release dates lately.
I remember UKECig having the iPOW 3-15W 1600 batteries as 'due in stock' on their site for many weeks ..got sick of checking! Think MyEPack got them in stock first in the end ..either that or they were around £4 cheaper initially there.

 

[vince01]

The tank itself isn't too different from the Aspire ET-S - I've got one but not used it yet, and as George says, the coil is very similar:
$6.12 Authentic Aspire ET-S BDC Bottom Dual Coil Clearomizer - 3.0ml / 1.8ohm at FastTech - Worldwide Free Shipping

They do look quite similar, if anything I would say that the M50 has more control over the draw

does the aspire have air flow control Trish ?

 

[Bobw1951]

and Innokin have decided it is time to announce their MVP 3 - not much info at the moment:
Innokin Announces The REAL MVP 3.0 | Guide To Vaping

 

[Bobw1951]

I'll believe it when I see it. If Evolv had to go down the Ni200 wire route to achieve it I don't see anyone managing with regular kanthal for now.

Think they may be confusing coil temp control with mod temp control which some of the newer mods (T8 and the 50w iStick) have

 

[Pictor]

They do look quite similar, if anything I would say that the M50 has more control over the draw

does the aspire have air flow control Trish ?

No it doesn't - but I think I may have just found a coil that looks very similar when looking down the chimney- Oniyo:
http://www.fasttech.com/products/30...eplacement-coil-head-for-oniyo-vapetank-1-0-5

The Smoktech one is a bit similar, but the white plastic looking piece down the chimney is slightly different:
http://www.fasttech.com/products/3007/10010056/1941602-authentic-smoktech-replacement-coil-head-for

And this is the Authentic Oniyo:
$7.84 Authentic ONIYO VapeTank 4.0 Bottom Coil Clearomizer - 3.0ml / 2.0 ohm / white at FastTech - Worldwide Free Shipping

So perhaps the M50 is an Oniyo 'style'?

 

[Pictor]

and Innokin have decided it is time to announce their MVP 3 - not much info at the moment:
Innokin Announces The REAL MVP 3.0 | Guide To Vaping

Another Magenta type colour! (They call it Rose Red!) the blue looks nice.

I see another view of it here - fire button on the side, but no measurements shown:
INNOKIN iTaste MVP 3.0, whoelsale 3800mah innokin itaste mvp, 30w box mod innokin mvp 3.0, View 30w box mod , Innokin Product Details from Shenzhen Innokin Technology Co., Ltd. on Alibaba.com

 

[vince01]

No it doesn't - but I think I may have just found a coil that looks very similar when looking down the chimney- Oniyo:
http://www.fasttech.com/products/30...eplacement-coil-head-for-oniyo-vapetank-1-0-5

The Smoktech one is a bit similar, but the white plastic looking piece down the chimney is slightly different:
http://www.fasttech.com/products/3007/10010056/1941602-authentic-smoktech-replacement-coil-head-for

And this is the Authentic Oniyo:
$7.84 Authentic ONIYO VapeTank 4.0 Bottom Coil Clearomizer - 3.0ml / 2.0 ohm / white at FastTech - Worldwide Free Shipping

So perhaps the M50 is an Oniyo 'style'?

Reckon you're bob on there Trish

 

[Bobw1951]

Another Magenta type colour! (They call it Rose Red!) the blue looks nice.

I see another view of it here - fire button on the side, but no measurements shown:
INNOKIN iTaste MVP 3.0, whoelsale 3800mah innokin itaste mvp, 30w box mod innokin mvp 3.0, View 30w box mod , Innokin Product Details from Shenzhen Innokin Technology Co., Ltd. on Alibaba.com

View attachment 401429

It's supposed to have Evolve's DNA 30 chipset inside because of an agreement the 2 companies made with each other.

 

[vince01]

Think they may be confusing coil temp control with mod temp control which some of the newer mods (T8 and the 50w iStick) have

When I first saw the Limwell claim I thought perhaps if they weren't using the coil info then

maybe they were programming some voltage limitations in based on ohms readings

or even a retrospective temp adjustment based on your first vape, but neither would be proactive

so not really temp control at all

 

[Evaravenspell]

It's supposed to have Evolve's DNA 30 chipset inside because of an agreement the 2 companies made with each other.

That looks awesome and mean! And evolve chip!

What's in magenta color trish? Sorry I couldn't browse the whole thread as I'm on my fon getting ready for bed. The laptop is like 10 feet away from me but I'm feeling lazy lol! But i got excited when I saw magenta and rose red lol.

 

[vince01]

It's supposed to have Evolve's DNA 30 chipset inside because of an agreement the 2 companies made with each other.

Going back to the Reddit article they said that there would be 2 new models

one to incorporate some consumer suggestions which I believe is the V3,

and an advanced model which I believe will incorporate the Evolv chipset

I think they would have mentioned the fact if the V3 had an Evolv chip

or maybe the release information is incomplete as yet