Finally, my Ego T kit has arrived! Woohoo!

[Koniie]

Hi all, jus gotten my ego T starter kit and i have to say, its kinda big and heavy due to the 900mah batt that i ordered.
Somehow, was disappointed with the white color as i thought it was suppose to be shiny white instead of matt / rubbery feel.

Any bros on this model, able to share some tips and tricks for a first time user?

Thanks in advance and happy vaping!

 

[wultan]

1st thing - Dont inhale the first 10+ puffs when you first use the atomizer! There's primer liquid inside that tastes very very bad...

Next thing - Start researching. Your ego-T atomizer is going to last for a while but not forever. You will need to start exploring and researching on cartomizers/clearimizers or whether you gonna stick with the ego atomizers (which cost quite a bit and hard to come by here).

Lastly - Enjoy. Whatever you do, keep off analogs for at least 2 weeks before you try one again. You will find that it tastes horrible and chances are, you won't return to it again.

Welcome!

 

[Koniie]

@wultan, do not inhale meaning jus dun talek and blow out immediately?

 

[wultan]

Yup. That is to try and get rid of as much as the primer as possible.

@wultan, do not inhale meaning jus dun talek and blow out immediately?

 

[dayn]

Happy vaping Bro.

 

[sixfiend]

awesome.... welcome to the club yo!

 

[MC28]

Stick a tissue into the area whereby the cartridges would be inserted before using the atomizer and then blow hard from the battery end of the atomizer..Try to get rid as much primer as possible before inserting a cartridge full of liquid, take a few long drags to get the flavour in..

And welcome.

 

[Yunn85]

You can speed up the primer burning process by blowing some of it out too. =) Welcome to our world!

 

[Koniie]

Thanks all for the tips so far!!! Currently charging it up and waiting patiently for it. Will get rid of the primer as much as I can. Bros, I jus read up on some fantastic juice like red bull and ry4. Wondering any way I get get those here instead of online?

 

[Bernut59]

Welcome...

 

[Koniie]

Pai seh bros, need some advice. Now lOoking at my tanks, there seems to be a hard plastic cap on it and there are also soft silicone caps. I presume, we need to swap with the silicone caps on, than we puncture it with the atomizer?

 

[MC28]

Both can be use..

The so call silicon caps is to prevent leaks(If it does work)..

 

[tinajfreeman]

One more tip, when you fill the tanks you can remove the bottom caps and just squirt the juice in. Then close tightly. If you have a minor leaking problem, they say the soft rubber caps you can order will fix that (if they didn't include them).

Some of the new models have replaceable atomizers. They sent me extra atomizers in my last set but I haven't had to replace one yet. These replacement atomizers are inexpensive. Not all models have these.

I am enjoying Vision Ego Clearomizers instead of the tanks that come with the Ego-T. You may want to try them when you do your next juice order. These are a tank and atomizer in one, without the fiberfill that comes in cartridges. Easy to fill, easy to use, easy to clean.

 

[Koniie]

Thanks all man!!! Tried it on with the hard plastic cap for the time being. Shall report back on how it feels later. For now, bk to my analogs. Zzz...

 

[Koniie]

Hi all, I dunno if it's me, but, the juice seems to drip out from the mouth piece. I guess it's a case of weird handling at my end ya?

 

[snooke_master]

Don't suck too hard... Slow and steady drag... For me eGo-T is medium vapor production... I only use mine for the ultimate standby PV...

 

[snooke_master]

Thanks all man!!! Tried it on with the hard plastic cap for the time being. Shall report back on how it feels later. For now, bk to my analogs. Zzz...

The rubber cap supposed to fit the atty feeder orifice better than the plastic cap... If you're on a thicker juice, the plastic cap works just fine....

Whenever you want to pull out e tank cartridge, must remember to twist as you pull... If you don't, chances are the cap got stuck inside... Quite troublesome to dig it out...

 

[Koniie]

The rubber cap supposed to fit the atty feeder orifice better than the plastic cap... If you're on a thicker juice, the plastic cap works just fine....

Whenever you want to pull out e tank cartridge, must remember to twist as you pull... If you don't, chances are the cap got stuck inside... Quite troublesome to dig it out...

Hey Guys, I tried with the soft silicon cap this morning and all seems fine as of now and now mastering the strength of dragging the PV as been advise by the bros here so as not to cause the liquid to come flowing out from the mouth piece instead.

1st impression was great but somehow, cant seems to feel the menthol favour which in return, feels kinda lightweight as compared to analogs. Is this norm for an Ego - T model such as its not using a LR atomizer or the juice plays a part as well?

 

[MC28]

What u can do is to order a bottle of menthol flavouring to tweak the juice with.

And it's normal to see water on the mouthpiece due to condensation..

 

[spurs14]

Is it normal to taste sweetness on your lips after a puff for mentol flavour? Is it the juice that i'm tasting?