Just pulled the trigger on 3 of the Squabs! Gonna try to torch 1 and see how the color turns out
Last edited:
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
Oh, I didn`t answer your question about comparison. Actually it`s impossible for me to rate my best RBAs. My daily rating seems to change with the weather or my mood or the liquid or the battery voltage.....
Squape, Kayfun, Taifun GT and GS, Flash e Vapor, AIOS and Aqua are perfect RBAs. All have a very good taste and produce huge clouds, if you like that. But all can be setup easy or can be used with more than 20 watts.
Place a new coil is easy on Kay, Tai and Squape. Kayfun 3.1, which is very often close to a 1:1 clone, is easy to recoil, can be used with cotton or silica even at more than 20 watt. Imho is the 3.1 the easiest RBA in any configuration. All KFL clones I know are far away from a 1:1 clone and suffer from leakage, because the chamber threads are to wide and the liquid channels are too wide. KFL can be setup with enough cotton very easy and can be used with 20 watts. Using it with silica wick is more difficult and causes often leakage. If the Taifun has the right o-rings and the steam tube is pressed in perfect, it can be setup easy for wattages up to 15 Watt. If you want to use it with more than 20 watt the liquid flow has to be perfect - cotton is best - but it can start leaking. The Squape is easy to build but you have to find the right amount of cotton or silica ( similar to the Taifun ). Too much and it runs dry.Not enough and it starts to leak from the 510. I never tried it above 15 watt.
The Squape is a brilliant vapor and is a beauty too. It`s finish is very special. Let your fingertip look at it.
Has somebody already bought a Flash e Vapor ( FeV ) which is a awesome RBA too - but it`s long and heavy and a strange beauty
Hey! Leave some for other people!
Better go get yours ... Don't want to get caught at the far end of the Group Buy list .. that promotion still has six days to go, and there are 86 sold already.
Oh, I didn`t answer your question about comparison. Actually it`s impossible for me to rate my best RBAs. My daily rating seems to change with the weather or my mood or the liquid or the battery voltage.....
Squape, Kayfun, Taifun GT and GS, Flash e Vapor, AIOS and Aqua are perfect RBAs. All have a very good taste and produce huge clouds, if you like that. But all can be setup easy or can be used with more than 20 watts.
Place a new coil is easy on Kay, Tai and Squape. Kayfun 3.1, which is very often close to a 1:1 clone, is easy to recoil, can be used with cotton or silica even at more than 20 watt. Imho is the 3.1 the easiest RBA in any configuration. All KFL clones I know are far away from a 1:1 clone and suffer from leakage, because the chamber threads are to wide and the liquid channels are too wide. KFL can be setup with enough cotton very easy and can be used with 20 watts. Using it with silica wick is more difficult and causes often leakage. If the Taifun has the right o-rings and the steam tube is pressed in perfect, it can be setup easy for wattages up to 15 Watt. If you want to use it with more than 20 watt the liquid flow has to be perfect - cotton is best - but it can start leaking. The Squape is easy to build but you have to find the right amount of cotton or silica ( similar to the Taifun ). Too much and it runs dry.Not enough and it starts to leak from the 510. I never tried it above 15 watt.
The Squape is a brilliant vapor and is a beauty too. It`s finish is very special. Let your fingertip look at it.
Has somebody already bought a Flash e Vapor ( FeV ) which is a awesome RBA too - but it`s long and heavy and a strange beauty
The KFL I just received does not leak at all, not even a little a bit ... thank you Baby Jesus.
When I first filled it through the fill port, I thought I was getting a tiny bit of seepage, but it was just excess liquid around the port after topping it off .. I am on my fourth refill, and the fill port remains bone dry between fillings, not a drop any where ... very pleased with sku 12113 ... and no whistling!
I have an Hcigar KF 3.1 and it never leaked until I tried to fill it from the side fill hole.
{Image deleted forever}
*** To those who I have offended***
I deeply regret posting the image that I had posted. When I first posted it, I thought it was humorous. Then realizing it was not funny at all. It was never my intention to hurt or offend ANYONE. Please accept my sincerest and deepest apologies. If need be I will remove this account if it is the wishes of those that felt offended.
Again I'm SO sorry
Keith
*** To those who I have offended***
I deeply regret posting the image that I had posted. When I first posted it, I thought it was humorous. Then realizing it was not funny at all. It was never my intention to hurt or offend ANYONE. Please accept my sincerest and deepest apologies. If need be I will remove this account if it is the wishes of those that felt offended.
Again I'm SO sorry
Keith
Last edited:
No my dear ... I did something that I have never done before ... I used one of the factory wicks that came with it. I altered it a bit of course, as I vape at 1.2 ohms, so I undid a few wraps, and installed it ... metered out to 1.4 ohms.
The main reason I decided to use one of those factory coils with silica is because the screws on this KFL are so darn tiny. It did not look as though I would be able to use my 30 gauge wire, but I also didn't try to. I remembered PhatRon saying that he had a hard time securing his leads with those tiny catch screws ... it also satisfied my curiosity about nichrome, which I have never used before.
Under normal circumstances Rudi I would have used cotton, as I do with my other Kay 3.1 ... this was an experiment that turned out very well .. and let me add that this factory silica build is putting out much better flavor than my Hcigar 3.1 with cotton .. which I attribute to overall build quality, not the silica. I am vaping the same e liquids I previously used with the 3.1, and there is a marked difference, and increase in flavor.
Missed it, you MUST PM it to me so I can make sure it was not appropriate
Vape On
Burnie
Missed it, you MUST PM it to me so I can make sure it was not appropriate
Vape On
Burnie
Sorry bud... that WON'T happen
Just kidding around Jonny
Didn't see it, but I'm sure you are forgiving by whoever did.
Vape On
Burnie
Just kidding around Jonny
Didn't see it, but I'm sure you are forgiving by whoever did.
Vape On
Burnie
Working on that now as we speak
i missed it too, and now i'm wondering what was that
. Curiosity killed the cat, ahaI'm getting in troubles like this all the time... I got bun by couple ppl because i said joke about a gays what was told me by gay (one of family members), but strait ppl bun me because it can be offensive against gays, when at the same topic gays did laugh there's guts out, aha...
I use 30 gauge and although it is a PITA it works just fine. Why every RBA does not use the post with the holes in them is beyond me.
i missed it too, and now i'm wondering what was that
I'm getting in troubles like this all the time... I got bun by couple ppl because i said joke about a gays what was told me by gay (one of family members), but strait ppl bun me because it can be offensive against gays, when at the same topic gays did laugh there's guts out, aha...
It's not important now. All has been made right. I wanted to post a public apology as opposed to a private one to the individual(s) that the image offended to show how deeply sorry I was.
Missed it, you MUST PM it to me so I can make sure it was not appropriate
Vape On
Burnie
Oh Burnie! 
- Status
Similar threads
- Locked
