And I still love you more Burnie
... Transit times between NY and Fl are always pretty good. 
... Have an extra sip for me the next time you are convalescing in your spa *whispers* I'm so jelly 
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
And I still love you more Burnie
... Transit times between NY and Fl are always pretty good. ... Have an extra sip for me the next time you are convalescing in your spa *whispers* I'm so jelly I actually wonder the same thing ... While I am aware of their uber popularity, I am curious as to why? I have heard many times that the Nemmy hits hards, but so do a lot of other mechs.
burnie,
if you go to home depot or lowes they have a water line punch tool for ice makers that works the same as carto punch and i believe there are cheap if you have to have it fast
if you go to home depot or lowes they have a water line punch tool for ice makers that works the same as carto punch and i believe there are cheap if you have to have it fast
So I can't say I HAVE VAPE MAIL COMING? (remembered my CC)
My Carto punch went fubar and I needed one quick (can't wait for China), so I ordered from A**d Vaper. Never used them before, but they are in NY, so shipping should be quick,
Love ya Nikki
Vape On
Burnie
For me, it was the first mod I saw paired with the kayfun that motivated me to want to learn enough to move beyond my regulated devices. It was not the first one I purchased but I held onto some fondness and have one now.
I just want to say to the regular posters, and lurkers in this thread that I don't have a problem with casually mentioning other vendors in this thread, its something that all of us have done at one time or another, including myself.
But there is a big difference between saying " oh FT has thing, and FC doesn't" or " I bought this from 101vape", and posting that once some other vendor increases their inventory, they are going to be the new Fasttech, and bouncing.
Whoever that person was, they literally just joined this website, and had all of 10 posts (at the time), which ironically is the minimum post count needed to post in this section of the forum. I felt like the post was suspect, with shady intentions, and that is why I addressed it.
Those of us who post here regularly, often make reference to other vendors, especially when its relevant to a product we are discussing/questioning, and I find nothing wrong with that ... Coming in here with the sole purpose of mentioning/promoting another vendor is a horse of a different color, and I know that most of you know where I am coming from.
But there is a big difference between saying " oh FT has thing, and FC doesn't" or " I bought this from 101vape", and posting that once some other vendor increases their inventory, they are going to be the new Fasttech, and bouncing.
Whoever that person was, they literally just joined this website, and had all of 10 posts (at the time), which ironically is the minimum post count needed to post in this section of the forum. I felt like the post was suspect, with shady intentions, and that is why I addressed it.
Those of us who post here regularly, often make reference to other vendors, especially when its relevant to a product we are discussing/questioning, and I find nothing wrong with that ... Coming in here with the sole purpose of mentioning/promoting another vendor is a horse of a different color, and I know that most of you know where I am coming from.
Got my nemesis mixed clone in from focale ecig this weekend. First mech mod ive ever used so im not exactly sure what to compare it to. Its got a nice amount of weight to it. Its a bit tricky to get the posts adjusted right to achieve a good feel of the firing button. If the botton's unscrewed too far, its wobbly and weird to push. Plus this super awesome little f'ing pin falls out which makes it almost impossible to unscrew the botton portion off the bottom. I have it adjusted finally where its working great. Is this a normal thing for the nemmy? Btw fasttechs tracking number still says "unable to find" since 4/16. Once again they told me to wait a few more days...
O yes, that thing hits like truck. Burns all my juices. I just put kick in, so it hits "normal" Had same thing with my aluminum mod. Really can't use it without kick for anything except dripper. Even my love- Kayfun burns juice with Nemmy with no kick, but.. i like cool vape so i'm good with it. Surprise, but i like the switch and locking ring, main is little stiff, i think it will get better with time. Size - it perfect in my hand... not sure, but it's for sure something very charmy about Nemmy. I sure will go after copper one as far as i'm back in badget (just got 3l 100mg nic, bit a costly, aha)
I think it's the design of the Nemesis switch that makes it a hard hitter, as far as design the Stingray takes a few queues from the Neme but overall is a much better looking device IMO. The Nemesis is also a short mod, especially in 18350 mode...people like this aspect also. And it can do 18650 + kick.
Personally I think it's overrated, I would take a Caravela or Stingray any day.
Personally I think it's overrated, I would take a Caravela or Stingray any day.
Welcom to the club, i'm waiting for drip tip being shipped 3 weeks now, from what 2 weeks it's being packaged,aha.
Can you please post Number of your Nemmy from FC inventory, a lot of them different manufactures and they are different. This way you can see answer for your mod.
Sku 18302, I got it for $15 during a group buy on 4/6. I didnt really expect the world at that price but like I said everything seems great except for that pin design.
I got SKU: 13124 and had to problem... because i think it's floating pin.
I dont know i like everynew device better then that one what i used, so i guess i just cona get all the clones of "named" mod and will go after origin of favorite. But really i like them all (my hubby hates vaping, if to count that i spend more time with "damn metal sticks" then with him)
While I don't have a Nemmy, I kinda agree, and definitely think that the Stingray is better looking. In fact, I actually like the brushed stainless SR, more than the Brass that I have, and it would be awesome if Doris decides to stock it ... Doris also needs to get the Tree of Life, and the Orochi clone too.... and the Lotus mech wouldn't hurt either
And the GP PAPS in 18350 or 500 with the CNC machined logo, NOT the painted GP logo.
There's a joke in that line but I will leave it alone
... you gotta luv that spicy donut!
Don't adjust your bottom pin all the way out. I found this out the hard way too. I have 2 Nemmys and use a 650 and a 490 set up. I'm glad you were able to figure it out and that it's working good for you. It's not normal per se, but it can be a bit tricky adjusting it.
They say - every joke has part of... jokeThere's a joke in that line but I will leave it alone
Good catch!!!
I figured this is a good place to post this....
Anyone else going in on the "group deal" for the squape? I figured this would be a good time to try out FocalEcigs.. I've always done business with Fasttech, and I figured it's a good way to check out a new vendor.
Anyone else going in on the "group deal" for the squape? I figured this would be a good time to try out FocalEcigs.. I've always done business with Fasttech, and I figured it's a good way to check out a new vendor.
Alot of ppl went. But... Fisrt come first shipped, it may happen they will go in overstock what gona delay shipping. Its over 150 sold so far.I figured this is a good place to post this....
Anyone else going in on the "group deal" for the squape? I figured this would be a good time to try out FocalEcigs.. I've always done business with Fasttech, and I figured it's a good way to check out a new vendor.
I figured this is a good place to post this....
Anyone else going in on the "group deal" for the squape? I figured this would be a good time to try out FocalEcigs.. I've always done business with Fasttech, and I figured it's a good way to check out a new vendor.
Got in on 3!!
- Status
Similar threads
- Locked
