Focalecig ... A new Fasttech??

[halfempty]

Well .. to increase your frustration, what FC has coming is much nicer than the sigelei 50W, and if you like that, then you should love this ... but then again you like ugly stuff so you may not agree Now the one that I am going to do everything in my power to convince D-nice to get (crying, harassing, stalking, threats, whatever it takes), you may or may not be interested in .. although you should be because I said so!

Just think "delayed gratification"

Ugly is in the eye of the beholder As long as it's small and has a good chipset it has potential. I guess for now I'm in your hands.

P.S. Earlier you asked for thoughts on the Vapor Flask V1. I wouldn't buy it or any other clone with a sealed battery, unless it fell into the sub $20 disposable toy category, and even then I would have to be in the right mood.

 

[TamiPac]

Doris said the new and qc improved batch is arriving early next week, so at least you will be able to get a replacement quickly when its all said and done

And sorry, don't mean to taunt about the Squape, which is the other reason that I didn't post to much about it, I didn't want to torture my peeps Nailz is not as merciful as I am

Didn't want to torture us riiiggghhht.

 

[TamiPac]

I sure hope so Drifter .. I have zero complaints about mine, and I am very sincere when I say that I like the Wotofo, but I love the Robbot ZNA. So I really hope that Robbot pulled it all together on this batch, based on what I have in hand that is clearly possible. And that being the case the I can't imagine that you would be unhappy with it, its so sexy feeling. I fondle it constantly or as inswvra would say "fat fingering it"

I have an e-mail into Doris right now, I have to exchange my Robbot ZNA30. I believe the problem is the pin that manages the fire button. It seems to have come VERY loose and fires when it wants to not when I want it to. Also makes it very hard to lock it as it decides if it wants to let a click register. Hope they have this figured out as well.

 

[Nikkita6]

Oh snap! I love it when you put me in my place.

I know you do honey boo

 

[Nikkita6]

Ugly is in the eye of the beholder As long as it's small and has a good chipset it has potential. I guess for now I'm in your hands.

P.S. Earlier you asked for thoughts on the Vapor Flask V1. I wouldn't buy it or any other clone with a sealed battery, unless it fell into the sub $20 disposable toy category, and even then I would have to be in the right mood.

I love it when you talk submission to me .. "As long as its small" check, "and has a good chipset" check .. and some other neat stuff too, it can do more than the Sigelei can, and it looks a helleva lot better too

I am so majorly bummed about that that damn Vapor Flask clone MAJOR!! .. I just hope that somewhere in Shenzhen there is a manufacturer who is working on the V2, which is very possible. Usually manufacturers wait until a clone is around 2 weeks out from completion before they announcement it, so I have hope. And trust that as soon as it is I will be all about making sure we get it!

In the meantime, Vamo and SVD style lovers need a upgrade and other options too .. and they are going to get one! I wrote an article about it that will publish either late Monday or Tuesday

 

[Nikkita6]

Didn't want to torture us riiiggghhht.

Hey ... I only tease, never torture ... halfempty is the exception to this of course. I show no mercy to him, but he likes that

 

[Nikkita6]

I have an e-mail into Doris right now, I have to exchange my Robbot ZNA30. I believe the problem is the pin that manages the fire button. It seems to have come VERY loose and fires when it wants to not when I want it to. Also makes it very hard to lock it as it decides if it wants to let a click register. Hope they have this figured out as well.

Jeez me too .. it some how feels criminal to be holding such a fine piece and I thoroughly enjoy, yet most of my peeps are not knowing the same pleasure .. You will, I have faith in Robbot. Sylvia reminds me of Doris a lot, and I have become very fond of her. She is very forthcoming with information, and I genuinely get the impression that she cares about what is being put out, and also making it better.

Sylvia Robbot wrote a short statement and I put it at the end of my review ... hoping aside, the truth is always in the experience, so with fingers crossed we shall see.

 

[halfempty]

I love it when you talk submission to me .. "As long as its small" check, "and has a good chipset" check .. and some other neat stuff too, it can do more than the Sigelei can, and it looks a helleva lot better too

I am so majorly bummed about that that damn Vapor Flask clone MAJOR!! .. I just hope that somewhere in Shenzhen there is a manufacturer who is working on the V2, which is very possible. Usually manufacturers wait until a clone is around 2 weeks out from completion before they announcement it, so I have hope. And trust that as soon as it is I will be all about making sure we get it!

In the meantime, Vamo and SVD style lovers need a upgrade and other options too .. and they are going to get one! I wrote an article about it that will publish either late Monday or Tuesday

There are a couple that fit that description, I hope it's the one I'm thinking of. Won't ask any questions so you don't have to snap at me, although I might like that. Sometimes you just have to bow to The Temptress and trust in her abilities.

If you have any contacts at YiHi maybe they can steer you in the direction of someone sourcing their chips for a Vapor Flask type mod. Don't know if they would give out that kind of information though.

 

[Nikkita6]

There are a couple that fit that description, I hope it's the one I'm thinking of. Won't ask any questions so you don't have to snap at me, although I might like that. Sometimes you just have to bow to The Temptress and trust in her abilities.

If you have any contacts at YiHi maybe they can steer you in the direction of someone sourcing their chips for a Vapor Flask type mod. Don't know if they would give out that kind of information though.

Ahahaha .. well if you want to pm with your guesses, I will be more than happen to tell you. Its only right that I give in at some point right?

I do have a contact at Yihi in fact, but I am being delicate with my questions because Yihi has a very guarded disposition .. so you know, its challenge to get the information that I want, but in the end I usually get what I want. And I want that SX Mini .. I wish I was a manufacturer, I would just make that damn Vapor Flask V2 clone myself, and with a Yihi chip to boot!

*sigh* In a perfect world I can do it all myself, pfft .. too bad I am not their yet

 

[AbdomenCutter]

Brand new here just broke free of the annoying 5 post rule and been lurking for a month now.
Okay here is my question. Are the hana clones from focalecig any good? Do they display ohms and battery readings correctly? I don't want to plop down money if I can fork out a little more somewhere else for a better clone. Also what is a good rba and RDA for it in your opinion? I've been vaping on my evod and am slowly losing interest from it. I want more flavor and vapor than what I'm getting and was considering an MVP for awhile til I ran into the hana clones at FT and 3AVape. I just want something that can throw out clouds when I want it to and give me good flavor from juices without killing the bank thus the hana clones. Help??

 

[halfempty]

Ahahaha .. well if you want to pm with your guesses, I will be more than happen to tell you. Its only right that I give in at some point right?

I do have a contact at Yihi in fact, but I am being delicate with my questions because Yihi has a very guarded disposition .. so you know, its challenge to get the information that I want, but in the end I usually get what I want. And I want that SX Mini .. I wish I was a manufacturer, I would just make that damn Vapor Flask V2 clone myself, and with a Yihi chip to boot!

*sigh* In a perfect world I can do it all myself, pfft .. too bad I am not their yet

I may take you up on your most gracious offer, but first let me try that willpower thing.

I'm sorry but I'm glad you're not a manufacturer, I'm broke enough as it is.

 

[Nailz]

Brand new here just broke free of the annoying 5 post rule and been lurking for a month now.
Okay here is my question. Are the hana clones from focalecig any good? Do they display ohms and battery readings correctly? I don't want to plop down money if I can fork out a little more somewhere else for a better clone. Also what is a good rba and RDA for it in your opinion? I've been vaping on my evod and am slowly losing interest from it. I want more flavor and vapor than what I'm getting and was considering an MVP for awhile til I ran into the hana clones at FT and 3AVape. I just want something that can throw out clouds when I want it to and give me good flavor from juices without killing the bank thus the hana clones. Help??

I've had my hana a few weeks now and had no problems with it, everything works as it should on it, well worth the money

I am a fan of the magma myself and if new to building, then it is a good one to start with as well, as it is easy to build on and can do single or dual coils on it.

 

[TamiPac]

I've had my hana a few weeks now and had no problems with it, everything works as it should on it, well worth the money

I am a fan of the magma myself and if new to building, then it is a good one to start with as well, as it is easy to build on and can do single or dual coils on it.

Ditto Nailz!!! The DNA30's I've gotten from FC are flawless!

 

[inswva]

Another happy FC Hana clone customer here. I've been using mine as my daily driver for about 6 weeks and it's been flawless.

On another note, I'm planning to order a Sigelei 100 this week, maybe today... but now the mysterious Ms. Nicole has me questioning if I should wait to see what FC is going to drop on us.

 

[TamiPac]

Jeez me too .. it some how feels criminal to be holding such a fine piece and I thoroughly enjoy, yet most of my peeps are not knowing the same pleasure .. You will, I have faith in Robbot. Sylvia reminds me of Doris a lot, and I have become very fond of her. She is very forthcoming with information, and I genuinely get the impression that she cares about what is being put out, and also making it better.

Sylvia Robbot wrote a short statement and I put it at the end of my review ... hoping aside, the truth is always in the experience, so with fingers crossed we shall see.

Doris asked me if I could VIDEO the ZNA not firing Sorry, not happening but I did send her pictures of the misplaced pin, hope that works.

Nikki, any chance you could talk Doris into getting some replacement tanks for the Rose? Even though I'm not gangsta anymore because I'm a granny?

 

[inswva]

Finally have some new stuff in the USA warehouse! (26650 SRX, mini Nemi, black Hana clone, Big Dripper clone)

 

[cindycated]

...so how is FT getting away with carrying Squapes? They just released 2 more with logos and glass tanks.

 

[TamiPac]

...so how is FT getting away with carrying Squapes? They just released 2 more with logos and glass tanks.

Shao Lin magic

Seriously, if you look at it, it says it ships in 7 days so they don't even have it yet and may or may not fill the orders.

 

[cindycated]

Mine said the same thing (ordered when FC plug got pulled) and it's on the plane now.

I'm looking for this drip tip, in case anybody comes across it:

Just the drip tip, not the ugly atty.
Worse comes to worse, I guess I could buy this $6 atty, hammer out the FIXED drip tip and put an o-ring on it. Hmm...

 

[inswva]

Hmmmppphhh... glass tank, huh? Good thing FC doesn't have a cancel button on the pending orders page. I've gone this far, guess I'll ride it out. I may end up ordering one of the FT units though unless I can find a replacement glass tank option for Ivogo.