Focalecig ... A new Fasttech??

[Nikkita6]

Had to take off my socks to count high enough, but its been over 30 years since I last indulged. Those upside down genny designs confuse me every time. With the all metal construction, well just seemed it was for something else, that's why I asked. At least the Taifun GS has a nice clear tank to help give me a clue.

Any chance of a logo less GS showing up?


Sent from my Kindle Fire HDX using Xparent Purple Tapatalk 2

I doubt that on the GS .. a lot of people had issues with getting it to wick consistently, so its not exactly in demand at the moment.

 

[Nikkita6]

I guess you won't be needing this...

<ducking>

How precious But no .. I don't think I will ever be the cat lady

 

[Nikkita6]

Feral is wild (untame). Most of my current barn cats fall into this category.

My "pet" raccoons are tamer. They follow me around as I do yardwork, and hang out on the porch. A few years ago, I had like 10! People would come over and call me on their cell, "OMG, there are a bunch of raccoons on your porch! Help me! I can't get out of my car!". I would say, "They're quite tame, you can walk right past them.". They would insist I come out to help, lol!

 

[KTMRider]

Finally got my first order from FC. The Infinite KFL+ v2 has a small air hole. I'll have to drill it out. The Erlk clone is about the same as the FT as far as function. Fit and finish is a bit better on the FT version (silver box).

*Edit: And my Hana clone is is still in "collecting products" for the past 2 days

I know... bad form replying to my own post.

After using the KFL+ v2, the whistling was bothering me because my other 2 KF's are pretty quiet. I took out the airflow screw and now it's just as quiet. The draw is about the same as my KFL+ v1 with a bigger air hole (2mm vs 1.5mm). I guess the center post is the choke point. I can live with it as is.

 

[TamiPac]

I know... bad form replying to my own post.

After using the KFL+ v2, the whistling was bothering me because my other 2 KF's are pretty quiet. I took out the airflow screw and now it's just as quiet. The draw is about the same as my KFL+ v1 with a bigger air hole (2mm vs 1.5mm). I guess the center post is the choke point. I can live with it as is.

I've also had to take out the "stuff" and/or drill out the hole in all my Kayfuns and Taifuns. I guess I just like them wide open as I can get them. Really glad you got it working for yourself.

 

[KTMRider]

What's a flash sale? Leave it to FC to create yet another aggravating way for people to Not get stuff

Ok, I managed to see how this works.

You have about 2 seconds after the countdown to zero to click on the "instant kill" button for the deal. It takes you to paypal to pay for it once you click on the button. What I don't think they realize is that you can buy one, hit the back button and the counter resets to 1m30s and you can buy another one. Not sure how many times you can do it or if they'll let you buy more than once as I didn't check out.

I was thinking about buying 10 Erlk clones and reselling them on ebay but it probably won't work .

 

[TamiPac]

Really happy with FT tonight. Got my ERKL clone and the whole deck was useless. 510 wobbled and couldn't be tightened and one screw stripped the hole so no way to tighten anything. I started a ticket and just got a reply, hours later rather than days, asking if sending me a new deck would solve the problem. YAY, send away please. Must be a common problem if they already have the extra decks to send out. Came sealed from the manufacturer so they really couldn't check quality before shipping. like they would anyway but whatever.

 

[KTMRider]

I've also had to take out the "stuff" and/or drill out the hole in all my Kayfuns and Taifuns. I guess I just like them wide open as I can get them. Really glad you got it working for yourself.

I was "working" on the Erlk so I didn't really mess with the KFL+. The pics show the bigger 2mm hole. I was a bit disappointed until I took the airflow screw completely out. I do like a slightly tighter draw but it was too tight with the af screw in. Now it's perfect and quiet.

I'm having almost the same issues with the Erlk as I did with the FT clone but now that I have some experience, I was able to work thru most of it but it's just loud. Freight train loud. I'm going to try to port and polish the af channels to see if that helps.

The KFL+ v2 is awesome. What a deal too. You get all the parts for the short setup as well as the full size setup for less than $25 shipped. The short setup looks great on the Istick.

 

[KTMRider]

Really happy with FT tonight. Got my ERKL clone and the whole deck was useless. 510 wobbled and couldn't be tightened and one screw stripped the hole so no way to tighten anything. I started a ticket and just got a reply, hours later rather than days, asking if sending me a new deck would solve the problem. YAY, send away please. Must be a common problem if they already have the extra decks to send out. Came sealed from the manufacturer so they really couldn't check quality before shipping. like they would anyway but whatever.

Which version did you get? I've heard the same issues from others. My FT version in the silver box ($20.75) was perfect except for the o-ring on the chimney. I posted a quick review on the FC version with pics in the Erlk vs clone thread.

 

[TamiPac]

I was "working" on the Erlk so I didn't really mess with the KFL+. The pics show the bigger 2mm hole. I was a bit disappointed until I took the airflow screw completely out. I do like a slightly tighter draw but it was too tight with the af screw in. Now it's perfect and quiet.

I'm having almost the same issues with the Erlk as I did with the FT clone but now that I have some experience, I was able to work thru most of it but it's just loud. Freight train loud. I'm going to try to port and polish the af channels to see if that helps.

The KFL+ v2 is awesome. What a deal too. You get all the parts for the short setup as well as the full size setup for less than $25 shipped. The short setup looks great on the Istick.

It says somewhere on the rules that if you buy more than 3 they automatically empty your cart.

 

[TamiPac]

Which version did you get? I've heard the same issues from others. My FT version in the silver box ($20.75) was perfect except for the o-ring on the chimney. I posted a quick review on the FC version with pics in the Erlk vs clone thread.

I got the purple one, you know that without asking

 

[KTMRider]

I got the purple one, you know that without asking

Most likely the same one I got but with a colored tank. Pick up an o-ring for the chimney.

 

[roxynoodle]

I don't have an o ring on my Erlk chimney. Why does it need an o ring?

 

[TamiPac]

Most likely the same one I got but with a colored tank. Pick up an o-ring for the chimney.

No, the one I got comes in a box with a pull out section by YZP. Reminiscent of the Kanger packaging but filled with a POS I think I will have to add a much better o-ring too, you're right about that!

 

[KTMRider]

I don't have an o ring on my Erlk chimney. Why does it need an o ring?

It should be captured in the top cap. If you don't have one, the tank isn't sealed and it will flood and leak.

No, the one I got comes in a box with a pull out section by YZP. Reminiscent of the Kanger packaging but filled with a POS I think I will have to add a much better o-ring too, you're right about that!

Oh no. Can you cancel? Sorry to say but the YZP is the worst of the clones from what I've read. One guy just threw his out because it was so bad and he didn't want to deal with returning it. The one I got in the pic isn't the best but it works at least. The silver box I got from FT is supposedly the best clone and I can say it's definitely better than the one I got from FC.

 

[cindycated]

Whoosh! Here she goes again:

You think they'll ever clone this one? I need one more mod for my Orchid, but not a $1300 one.

OK, back to Erlk.

 

[roxynoodle]

I like the Erlk so much I'm going to splurge on a nice ibtanked glass for it. Maybe the one with the red and black rings. Hope they send you a good deck, Tami.

 

[roxynoodle]

It should be captured in the top cap. If you don't have one, the tank isn't sealed and it will flood and leak.




Oh no. Can you cancel? Sorry to say but the YZP is the worst of the clones from what I've read. One guy just threw his out because it was so bad and he didn't want to deal with returning it. The one I got in the pic isn't the best but it works at least. The silver box I got from FT is supposedly the best clone and I can say it's definitely better than the one I got from FC.

Oh ok, that one is there. The one I'm using is the ft silver box. Good threads and finish. Works as it should. Need to be careful not to lose those little o rings in the top fill ports, but otherwise I think its a pretty good clone.

 

[KTMRider]

OK, back to Erlk.

Better than cats

I'm a dog person myself.

Oh ok, that one is there. The one I'm using is the ft silver box. Good threads and finish. Works as it should. Need to be careful not to lose those little o rings in the top fill ports, but otherwise I think its a pretty good clone.

The FC version holds the top fill port o-rings a little bit better than the FT version. That's about the only thing better on the FC version.

 

[Nikkita6]

Check out this bit of tomfoolery Yiloong New Hot Zero Mod Clone Box Mod As Vaporflask Clone - Buy Box Mod,Zero Mod Clone,Vaporflask Clone Product on Alibaba.com

Now my deck is on Alibaba