Focalecig ... A new Fasttech??

[Laylel]

I am a HUGE HUGE Tree of Life fan as well Laylel, so you are not alone. The KFL sku 12113 will look GREAT with the Tree of life mod .. I want another sku 12113 too, I love it too. I am actually gonna rebuild it "nano style" in a little bit.

Man... i sometimes getting nuts about all this nano, macro bla-bla... because i don't know different)))
You see what you do to me, you make me make you work!!! You did it!!! yourself - don't blame me.

I think i didn't see anywhere guide for newbies what it the difference between coils builds and wth nano kit need for (beside of look reason). Can you please to do this???

 

[Nikkita6]

Thanks for passing on my request for the Kayfuns in Group Buys to Doris. I would be glad to try to help any members with kayfun problems.
Most Poldiac clones require a lot of work to get decent results with them. I think the Poldiac design is just too complicated for the cloners to have much luck with them. I have a DaVapes Poldiac clone that now works really good, but I spent a lot of time and money on it to make it a dependable mod.
I also have a Tebeco Poldiac clone that I have not had to touch yet and it works ok for a clone I guess. One problem with it is that the top adjustable 510 contact is too long and with it adjusted all the way down my atomizers will still not sit flush. Another problem with it is the battery tube top threads are really on the short side and I do not think it could handle much abuse. The Tebeco Poldiac is the only Poldiac clone that I would consider purchasing at this time. But I can assure you that no Poldiac clone as purchased will be anything like a real Poldiac. Also none of the Poldiac clones can do sub-ohms without melting the plastic parts in the switch head. The builds need to stay at 1 ohm and above.

Oh wow, I had no idea that Tobeco even made a Poldiac clone ... do you have pics of it??

 

[Nikkita6]

Man... i sometimes getting nuts about all this nano, macro bla-bla... because i don't know different)))
You see what you do to me, you make me make you work!!! You did it!!! yourself - don't blame me.

I think i didn't see anywhere guide for newbies what it the difference between coils builds and wth nano kit need for (beside of look reason). Can you please to do this???

So are you trying to tell me that I need to write a blog to explain the difference's between micro, and nano coil builds? ... and also to explain wth a nano kit is used for?

And yes, I understand this is my fault that I gave you an idea, to create more work for me Well, here is my Turtlefun "custom nano" style

 

[Laylel]

So are you trying to tell me that I need to write a blog to explain the difference's between micro, and nano coil builds? ... and also to explain wth a nano kit is used for?

Who from us ESL?
I think that what i did try to say

Oh, btw, pictures will be nice too

Out of joke. I never did see anything like this type of manual. I look at pics and (may be i'm not smart enough) i do not see a different. So i put what ever i can do and what ever works and don't even know what a heck i'm doing sometimes.

 

[Laylel]

Well, here is my Turtlefun "custom nano" style [/IMG]

No, no, no... i didn't see it , i'm waiting for other stuff and not buying anything till i get that.

Really nice looking set up .

 

[Cranky99]

So are you trying to tell me that I need to write a blog to explain the difference's between micro, and nano coil builds? ... and also to explain wth a nano kit is used for?

And yes, I understand this is my fault that I gave you an idea, to create more work for me Well, here is my Turtlefun "custom nano" style

What is that DRIPTIP?????????

Who from us ESL?
I think that what i did try to say

Oh, btw, pictures will be nice too

Out of joke. I never did see anything like this type of manual. I look at pics and (may be i'm not smart enough) i do not see a different. So i put what ever i can do and what ever works and don't even know what a heck i'm doing sometimes.

 

[Laylel]

Message to Doris on 18/05/2014

Hello Doris, hope you have a good day.
I hate doing this but i have issues with some items what i received.

#order
Nemesis Style Electronic Cigarette Mechanical Mod -Silver sku 13124
After propel clean up treads, bottom/switch part tread diameter smaller then a tube diameter and after cleaning started to fall out from batteries wait. If you will need i pics (not really sure how to do that) but it's known problem with this Nemmy from FC tread on EFC forum.

Order#
Kangertech Aerotank Electronic Cigarette Atomizer Set-Silver (2.0mL 2.0Ohm)
Central pin on base is very lose what cast shorting (did blow battery with it, not your folt so).

I did slow down a lot on shopping on FC for shipping options reason. Singapore post takes forever sometimes up too 8 weeks, it takes a week just receive it from customer. I was wonder if it possible for you to get China e-packet post services. I use this service with FT and shipping time 7-12 days (they offer it at extra cost +$2). You have EMS option for USA what let delivery be pretty fast, will be nice if you cud get something like this for other countries. Sorry to bother you with it.

I did try fulfillment for order# and it didn't allow me to do it.
Hope to hear some good news from you.
Tatiana

Answer in end of conversation on 20.05.2014

Hello Tatiana,

I am very appreciate your understanding and patience.

I've created this order# for a SKU 13124 and two pieces Kanger aerotank base. You can see this order on your account if you register an account by @mail.ru. Tracking number will be updated once it is shipped.

Yes, we have lost money because of this supplier. After they compensated partly to us, we decided to end all cooperation with him. This is a great lesson for both of me and Focalecig. The kanger products we are selling are proved to be Authentic after we scratched many security code to check on szkanger.

Glad to hear that you are still a happy customer on Focalecig. As for me, honesty wins more deals.
Look forward to your continual support on Focalecig. If our USA warehouse built, your shipping concern might be allivated
Kindest Regards,
Doris

Needless to say i'm more then happy on solution and time required for solving of issue.

 

[Portertown]

Oh wow, I had no idea that Tobeco even made a Poldiac clone ... do you have pics of it??

Poldiac Style Stanless Steel Mechanical Mod by Tobeco USA Stock Fast SHIP | eBay

Check this link out for info and pictures. Some of the Tebeco Poldiac clones do not have the engraving on the bottom cap(mine does not) and some do not have the sig on the fire button(mine does). It seems very few sellers offer these Tebeco Poldiac clones.

 

[Corpse]

Was merryly checking out the news on the site this morning and guess what? The group buy panzer WAS SHIPPED ALREADY!!!!

 

[Laylel]

For everyone - visit FC page. New event - Give away!!!

 

[freedomfighter]

For everyone - visit FC page. New event - Give away!!!

And a new vote for group buy coming too !!!

 

[sky4it]

On the Taifun ... you have pull the chimney wall up until is snaps into place ... there like a catch groove at the bottom of the inner chimney sleeve. It will move easily until its snapped into place.


The center tube and top is supposely to stay together as one piece, its connects to the opening at the top of the chimney. When filling the tank, you fill around the chimney until the e liquid level reaches the black o ring at the base of the center tube. The you screws the base with chimney sleeve, and cover in place. *make sure the chimney sleeve is fully up*

Interesting points- these where the first two "problems" that I encountered when I got the Taifun out of the box; which if I knew what I was doing wouldn't have been problems at all.

1) About the chimney wall catching on that groove, thought I lost a piece of the Taifun after my coil build, so I spent 20 minutes looking for a non-existent part. Went and watched Phil B's video, checked the parts that come with it on line... walla.... no missing piece at all, just slide that chamber up. My bad.

2) When filling the chamber with eliquid, I thought it was a little odd that when i was filling with ejuice, it was all running right down into the atomizer chamber.
Yep, wish I would have had your paragraph two first also.


both those points, probably be perfect in your blog under Taifun, please read this when you take your taifun out of the box....... or >>>> you will do what this meathead did>>>Me


Thanks Bye

 

[Laylel]

both those points, probably be perfect in your blog under Taifun, please read this when you take your taifun out of the box....... or >>>> you will do what this meathead did>>>Me

Nikki)))
One more member push you into work and more work!!!
Don't tell anyone else you are workaholic, aha

 

[Nikkita6]

That is Vapelyfe baby ... yeah

What is that DRIPTIP?????????

 

[Nikkita6]

Message to Doris on 18/05/2014



Answer in end of conversation on 20.05.2014



Needless to say i'm more then happy on solution and time required for solving of issue.

Doris is awesome! So happy that she took good care of you .... and now I know your real name!

Tatiana ... I knew you were a sexy bish

 

[Nikkita6]

For everyone - visit FC page. New event - Give away!!!

I just saw that ... I wonder what D-nice is giving away? I prolly won't enter because if I win everyone will think it was rigged!

I hope someone from this thread does win though

 

[Nikkita6]

Was merryly checking out the news on the site this morning and guess what? The group buy panzer WAS SHIPPED ALREADY!!!!

Yeah baby! ... nothing like a quickie eh? ...

 

[Nikkita6]

Interesting points- these where the first two "problems" that I encountered when I got the Taifun out of the box; which if I knew what I was doing wouldn't have been problems at all.

1) About the chimney wall catching on that groove, thought I lost a piece of the Taifun after my coil build, so I spent 20 minutes looking for a non-existent part. Went and watched Phil B's video, checked the parts that come with it on line... walla.... no missing piece at all, just slide that chamber up. My bad.

2) When filling the chamber with eliquid, I thought it was a little odd that when i was filling with ejuice, it was all running right down into the atomizer chamber.
Yep, wish I would have had your paragraph two first also.


both those points, probably be perfect in your blog under Taifun, please read this when you take your taifun out of the box....... or >>>> you will do what this meathead did>>>Me


Thanks Bye

This a point that I have mentioned a few times within this thread, but perhaps a "how to" blog for the Taifun would be a good idea

Nikki)))
One more member push you into work and more work!!!
Don't tell anyone else you are workaholic, aha

... *sigh* .. well, its gonna have to wait until my latest vapeporn production is finished ... I am in the creators zone right now

 

[Corpse]

200+ people won't let me have the hammer for group buy!!!

 

[Nikkita6]

200+ people won't let me have the hammer for group buy!!!

.. I have to go look at voting. Hmm, what do I wanna see on Group Buy? Errr, Kayfun Lite sku 12113, Tree of Life, Aqua and Origin mod, Kayfun 3.1, The Sparta (so big and heavy ), and and and