Focalecig ... A new Fasttech??

[Nikkita6]

Well just pulled a trigger on 2 kayfuns 12113 and Stingray with drip tip. Now phase 2 - waiting for mail.
As soon i get my PG i dont need to buy other e-juices i have enough stuff to last me for years now (still gona get more nicotine, before this ban/tax situation going on) and i'm set.

FC put up copper panzer for something like $25. All this time i wonted copper that bad, just because i love copper. Now i'm thinking - first thing what being said about copper mod - hit hard, but i do not need it, i had to put kick on ss nemmy because it was that hard i didn't like it anymore. So copper - i need a kick or put a coil up to 2'5-3.0 Ohm. Do i really need that copper panzer (my copper Nemmy on way).

I'm full of everything, may be enough to set up 20 ppl with a gear, but can't stop looking at all those mods and such. Need to do something with it

Hello ... make a vapeporn movie ... its fun, and creative .... and a good excuse to buy more For the "art" ;-)

 

[Nikkita6]

Ordered thanks for the heads up!

Nelson darling are you happy?? ... that was fast right? ;-)

 

[Nikkita6]

Ahahahha ... get your sexy on The 4nine is a bit pricey, but it looks like it may be worth it

Hell sexy ... 4nine!!! Going to have to order that. I do believe that infinite are one of the few that cloned it so far.

Anyone know if this could be a infinite?

Order for that asap abd that price beats a few quotes I had on samples from infinite! !

Edit* noticed they changed the price.

 

[Nikkita6]

I thought so but when I select that it switches y country to United Arab emirites instead of US

Crocky my sweet ... if it continues to happen then email Doris. There may be something jainky in the system.

 

[Nikkita6]

i'm also waiting for the KFL 12113. it was shipped yesterday. next kayfun type one will be the 3.1 SKU 12006; hope this goes to groupbuy ever (actual price can be subjected to custom taxes). and hope you enjoy your 12113's with no bad issues.
the stingrays must be very close to my mailbox.
using kicks too, as not planning subohm for a while.
yea, it's difficult not to love such lovely mods (now checking the hammer type).. maybe some kind of subconscious fixation is around this.. i've stopped ordering hard gear. now, liquid "gear"..

KFL 12113 is a great Kayfun clone, I love mine, and would love more of them ... I am also waiting for a SS Stingray, but it looks like it may not be here until next week.

 

[haku]

Awww ... this message warms my heart in so many ways Thank you so much for taking the time to post this comment Its makes us vape gear addicts feel like we have a purpose in life besides shopping

Genuinely pleased that we were able to be of good use to you, and hopefully many other "lurkers" because I know they are out there.

And if you wanna see some colors, textures, and shape, stay tuned to for my next vapeporn production .. Nikki is getting her Art on!!

You can feel proud of your work in this thread, indeed.
Ready to see your sexy/artistic new vapeporn

 

[Nikkita6]

You can feel proud of your work in this thread, indeed.
Ready to see your sexy/artistic new vapeporn

Thank you .. I'm so excited for this video, its a very different "feel" than my prior works. Hopefully will be finished and ready by next week, or maybe even this weekend

 

[nelsonm64]

Nelson darling are you happy?? ... that was fast right? ;-)

beyond fast nikki! soo looking forward to getting it. from the first review I saw I knew I NEEDED one haha, simple design I suspect it'll be close to the original. but, i'm not new to modding thanks again Nicole

 

[Nikkita6]

beyond fast nikki! soo looking forward to getting it. from the first review I saw I knew I NEEDED one haha, simple design I suspect it'll be close to the original. but, i'm not new to modding thanks again Nicole

I am putting the 4nine on my list as well ... I am attracted to the hybrid aspect of the mod ... and the copper contacts don't hurt either. High five to FC getting the 4nine out before FT.

 

[Laylel]

I am putting the 4nine on my list as well ... I am attracted to the hybrid aspect of the mod ... and the copper contacts don't hurt either. High five to FC getting the 4nine out before FT.

i'm walking around 4nine as well. 22mm wil be perfect for kayfun and copper-copper-copper.

 

[Thunderball]

I am putting the 4nine on my list as well ... I am attracted to the hybrid aspect of the mod ... and the copper contacts don't hurt either. High five to FC getting the 4nine out before FT.

Nikkita 6....nice to see your still holding down the fort !! Good to read your posts again. Ill check back in, in other few weeks..

 

[Laylel]

I just spend to much and this situations with work... other way i will push a button with no questions

 

[Nikkita6]

Nikkita 6....nice to see your still holding down the fort !! Good to read your posts again. Ill check back in, in other few weeks..

Hello my dear, long time no see. I hope all is well with you ... see you in a few weeks :cheers:

 

[Nikkita6]

I just spend to much and this situations with work... other way i will push a button with no questions

I hear ya girlfriend ... no worries, it will still be here, and plenty more by the time you are ready to push the button.

 

[haku]

I am putting the 4nine on my list as well ... I am attracted to the hybrid aspect of the mod ... and the copper contacts don't hurt either. High five to FC getting the 4nine out before FT.

i'm walking around 4nine as well. 22mm wil be perfect for kayfun and copper-copper-copper.

does the nano kit work with your KFL 12113?
(it's not working for the "tobecco" i got: the thread of the nano chimney is too large and makes a short; if you add an o-ring to that thread, the chimney pushes the top cap too much, and you can't tight the cap)
nano kfl + 4nine in 350 mode would be an adorable "shorty"..

 

[Nikkita6]

does the nano kit work with your KFL 12113?
(it's not working for the "tobecco" i got: the thread of the nano chimney is too large and makes a short; if you add an o-ring to that thread, the chimney pushes the top cap too much, and you can't tight the cap)
nano kfl + 4nine in 350 mode would be an adorable "shorty"..

Yes, but there are a few things that need to be done ... First, I have two kinds of nano kit, one that comes with a Custom top cap, chimney top, and another that is the standard drop kit with smaller tank sleeves, and chimney ... the chimney for the standard drop kit is threaded too long for sku 12113, but works fine with my 3.1 clone.

The chimney from the Custom cap kit is better .. it threads in without creating shorts, but you need two orings (one for top cap and one for chimney top). When I want to use the standard drop kit, I use the chimney cap from the Custom cap nano kit .. Does this make sense?? So yes, I am able to use the nano kits on sku 12113, but it requires the chimney top from the Custom cap kit .. or I have to use the chimney base from my 3.1 in order for it to fit.

 

[Laylel]

Nikki... Ok, base what you use = main tank what you put nano kit on
So... if you use base from 3.1 it 3.1 Kayfun with chimney from nano and shield and top cap from 12113...

i'm confused, why to bother?

I just got nano kit for my sandblasted Kayfun only for custom cup, so i can replace drip tips and finaly finish my Easter-like mod.
I really do not get purpose of an other chimney

 

[haku]

Yes, but there are a few things that need to be done ... First, I have two kinds of nano kit, one that comes with a Custom top cap, chimney top, and another that is the standard drop kit with smaller tank sleeves, and chimney ... the chimney for the standard drop kit is threaded too long for sku 12113, but works fine with my 3.1 clone.

The chimney from the Custom cap kit is better .. it threads in without creating shorts, but you need two orings (one for top cap and one for chimney top). When I want to use the standard drop kit, I use the chimney cap from the Custom cap nano kit .. Does this make sense?? So yes, I am able to use the nano kits on sku 12113, but it requires the chimney top from the Custom cap kit .. or I have to use the chimney base from my 3.1 in order for it to fit.

thank you so much!! =)) wow, that's funny, playing tetris..
so i guess i should get the custom cap nano kit plus the two orings, and keep the drop kit for a future 3.1 (rather than trying to sand/cut 1mm from the chimney thread). or even better, trying to get a spare 3.1 chimney base (i've not seen this spare yet)

 

[Nikkita6]

Nikki... Ok, base what you use = main tank what you put nano kit on
So... if you use base from 3.1 it 3.1 Kayfun with chimney from nano and shield and top cap from 12113...

i'm confused, why to bother?

I just got nano kit for my sandblasted Kayfun only for custom cup, so i can replace drip tips and finaly finish my Easter-like mod.
I really do not get purpose of an other chimney

Noooo .. I mean on the chimney sleeve from the 3.1, not the base of the device ... although I have put a Nano on the 3.1 as well, it still reduces the size a little. You'll see it in my next vapeporn video

@Haku ... a few pages back I posted a pic of KFL sku 12113 w/custom nano kit. .. I guess I will post it again

 

[haku]

thx for reposting the pic