Hi Nikki, got the rest of my vapemail in today so as promised here is the new Family Photo 
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
`
Oh snap! I never considered the 3d for the Astro! I have an Astro, and I have always liked the 3D concept, so halfempty you have just given me an idea to get my horribly neglected Astro back into rotation! ... great, something else for me to get.
These two look so cute together, I really like this set up. ... And now you and sub ohm 
So did you successfully connect with your inner cloud chaser? 
Thanks Nikki, the sentiment is greatly appreciated, but at least Quasar from the same shipment is rocking! To console myself I did something I rarely ever do and built a sub ohm dual coil setup in it. Used a couple of my expensive juices and all is better now.
For your amusement I dug out my weird 3D and took a pic. A 3D hybrid on an Astro just doesn't sound right. Sorry about the low quality, but kinky porn is supposed to be artistically crappy
View attachment 350743
ETA: Oh yeah, forgot to mention it came from the other place, and I already started a ticket. It'll probably be a couple of days before I hear anything but I'll let you know.
Oh snap! I never considered the 3d for the Astro! I have an Astro, and I have always liked the 3D concept, so halfempty you have just given me an idea to get my horribly neglected Astro back into rotation! ... great, something else for me to get.
These two look so cute together, I really like this set up.
... And now you and sub ohm So did you successfully connect with your inner cloud chaser? That brass Cartel looks slick as hail Tooth Tamer, so perhaps you should rethink this one. I would honestly prefer the stainless version myself, but this copper is looking nice
I would have to clear coat it though ... For copper, my heart is set on the Penny mod, even though it is bigger than I like being 650 only .. its friggin beautiful 
The quality of products in most cases is either the same, or better than FT, based on my experience with FC.
I believe the final total for the Vamo V5 turned out to be 2180. Thank you Doris.
The 2nd V5 just arrived and it did come with a small manual but is missing that small gasket, I really think I can make something that will work if needed, my brother doesn't think the gasket is even needed?
2 of the $12.90 nemy also arrived today.
If you now have two that arrived that way, then perhaps it was intentionally designed without it?? I have read a few feedbacks for the GB Vamo V5, and all were positive so far.
And you got two Nemmies Keyman?
Darlin, you don't play when it comes to your vape gear shopping, that is fo sho! Drifter ... that is so beautifully done, I am impressed my friend! So I see that you too are creatively talented .. umm, you could no doubt sell these, they are that nice. Great job, I love it!
Made this for you today
Hope you like it Bro
Hi Nikki, got the rest of my vapemail in today so as promised here is the new Family Photo
Beautiful, these are well thought out set ups Drifter .. and yes you are a "playa" in the vape gear club because I counted 14 APV's, the requirement for membership is 10!
Which are the items that you received today?? The Vela/Stillare set up in my favorite in this picture.
Thanks Nikki, glad you like it
I made it out of Black Delrin, when machined correctly it has almost a mirror shine to it I've been a machinist for just about 20 years, so I can make just about anything I can think of out of metal.
I'm willing to make you one too, PM me and we can discuss the details.....
Beautiful, these are well thought out set ups Drifter .. and yes you are a "playa" in the vape gear club because I counted 14 APV's, the requirement for membership is 10!
Which are the items that you received today?? The Vela/Stillare set up in my favorite in this picture.
Got the Hades, another TOBH Atty set (copper, brass and SS) and a 4nine set with all the tubes.
Sorry, didn't order them from FC, couldn't wait for them so I had to get them from a US vender
Thanks Nikki, glad you like it
I've been a machinist for just about 20 years, so I can make just about anything I can think of out of metal.
I'm willing to make you one too, PM me and we can discuss the details.....
You are?
Oh wow Drifter .. did you know that I have a stainless steel fetish? true story That is so nice of you to offer
I will pm in you in a little bit too .. at the moment I am a bit of chicken with its head cut off, I am all over the place. Got the Hades, another TOBH Atty set (copper, brass and SS) and a 4nine set with all the tubes.
Sorry, didn't order them from FC, couldn't wait for them so I had to get them from a US vender
I will forgive you ... this time
j/k That is a nice little lot of vape mail ... I have been dry as a bone this week, but hopefully next week I will have some vape mail to jump up and down about.
I hear that, i hope its good, fasttech has been bringing out a load of dead looking mods recently so if they are good might place a few more orders with them. I wana c the akuma, anarchist and stingray x on one of these sites asap
Sent from my iPhone using Tapatalk
did you know that I have a stainless steel fetish? true story
Nothing wrong with a little metal fetish, I've got one myself too
I just love my shiny shiny's 
Made this for you today
Hope you like it Bro
Well Hot Damn!!!! Thanks a bunch bro. That looks really good. I'm digging the font.
You would have to get a 3D from the same screwed up clone manufacturer I did that has Astro/ChiYou threads instead of Nemesis threads. And a 22/23mm hybrid is definitely kinky, that's why I like it`
Oh snap! I never considered the 3d for the Astro! I have an Astro, and I have always liked the 3D concept, so halfempty you have just given me an idea to get my horribly neglected Astro back into rotation! ... great, something else for me to get.
These two look so cute together, I really like this set up.
The cloud chasing is just for a couple of days to get over my bad thread mojo. Maybe I should do a dance while vaping to ward off the evil clone spirits
Nothing wrong with a little metal fetish, I've got one myself too
I love me some finely machined stainless steel, and my love is visceral too
Damn, sure happy that you joined this group! You would have to get a 3D from the same screwed up clone manufacturer I did that has Astro/ChiYou threads instead of Nemesis threads. And a 22/23mm hybrid is definitely kinky, that's why I like it
The cloud chasing is just for a couple of days to get over my bad thread mojo. Maybe I should do a dance while vaping to ward off the evil clone spirits
.. oh so I need a special jainky 3D dripper eh? I thought it was weird that it fit the Astro But its a cute set up, I'll take it! I will pay you money to see that dance!
I will offer up a prayer to the Vape Goddess on your behalf to see if we can lift this bad thread mojo you got going on ... now might be a good time to play with some nipples
I will pay you money to see that dance!
I'll have to get creative and see if I can incorporate nipples into the dance, but I'm not buying a 4nine now. If you really want a Frankenstein type mod, let me know and I can tell you where I got it, or just send you this one. I don't use it often, 3D's are a pain to build on and fill.
- Status
Similar threads
- Locked
