This is why I had an interest in the 3D dripper .. Halfempty says that it is still a PITA, but I shall see if my "vape whisperer" ways can make it better.
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
This is why I had an interest in the 3D dripper .. Halfempty says that it is still a PITA, but I shall see if my "vape whisperer" ways can make it better.
Yes, so Drifter has been telling me ... ugh, all these methods
But I will try it ... when I am not in a hit and run mood that is You and Drifter make a good tag team you know .. You keep me on my toes with the "collectors" game, and now I have Drifter over here reminding me that even as I am an experienced vaper/builder, that my building game is still relatively rudimentary.
Pulled the trigger on the brass 4nine and the kfl+ clone.
Which KFL clone did ya get?
Duno if I can post about dry herb PV's on here but I know the USA has all those lovely new laws in place now so... Focalecig had the Pax up for $58 this morning - something i've been wanting since i saw someone using one on a instagram video, I was so damn excited to see it there, went to place the order and it's just vanished, wdf!
Hmm .. I didn't look at new arrivals yet today. If they put it up, but then took it down, there maybe something they found wrong with it, or just some detail about the listing that needed to be corrected?? .. Email them and ask about it. If you have skype, you can wait until around 8 or 9pm tonight and skype chat with Doris about it.
I think the same one that you just posted...it was $30 and looked nicer than my Tobeco clone which functions well.
G-Weezy just order the TS SE, and I hope to eventually have one myself .. I am sure he will give us some feedback on it once it arrives. Weezy likes to make us jelly
Glad everything is good with your order, and that Hammer keeps coming back to mind because I also find it attractive, even as a pipe style wouldn't normally be my thing. I think I should eventually get one to round out my collection.
I haven't even considered the Aerotank mega because of the replacement coil situation, although I love the plug and play aspect of it, and I think it is also an attractive device. Kind of ...... that Kanger didn't come up with the 22mm concept earlier though.
Glad everything is good with your order, and that Hammer keeps coming back to mind because I also find it attractive, even as a pipe style wouldn't normally be my thing. I think I should eventually get one to round out my collection.
I haven't even considered the Aerotank mega because of the replacement coil situation, although I love the plug and play aspect of it, and I think it is also an attractive device. Kind of ...... that Kanger didn't come up with the 22mm concept earlier though.
3rd order in with FC, wasn't looking to buy anything, but checked new releases, saw that Heimdall and I couldn't stop myself, in cart and checked out
That Heimdall looks awesome, made of brass with no painted threads, so shouldn't be bad on voltage drop, which I have had problems with, on some of my black mods, but I can't turn down a good looking black mod
Oh also, the coupon code 'FCFANS' is still active to get 11% off your order
My picky Brit is at is again! Now I know what I need to do if I ever need to persuade you on anything ... just wave a black mod in your face, and BAM! I got ya!
Yes, I did mention in my review for the 4nine that the magnet in the delrin spacer is threaded, and adjustable and could be used to help shorten the throw, and improve connectivity between the battery and 510 pin.
Oh hell yeah its nicer than the Tobecco, so good choice! Out of the box the quality looks great .. I should have a review for it finished before you get yours.
Did you guys check out the new Copper Stingray?? Wholy mega deep engravings on the logo 
.. This one definitely looks better than the last one they listed ... I want 
These engravings are sick!
.. This one definitely looks better than the last one they listed ... I want These engravings are sick!
Last edited:
Lol. Drifter and I???? Yea we do. Lol. He just showed me that method of wicking. Ever since I'm hooked. Only way to do a dripper with consistent hits. Your coil builds huh? How they looking?
TS SE will look sweet. My status is collecting parts. Hopefully shipped soon.
TS SE will look sweet. My status is collecting parts. Hopefully shipped soon.
My builds are straight, but they are simple .. I never try to get fancier than perhaps some twisted wire. This is what I built after I failed at the deedoubleplex complicated thing
I can't wait til you get the TS SE ... then I will cry and cry until I get one .. I know how you like it when I cry
Did you see that new copper SR with the better engravings? Ugh, that and the Penny ... the the SS Cartel Weezy, the game has got me!
Yes I've seem it but I have a copper SR already. No need for temptations lol.
Instead of twisted coils try parallel instead. Heats up fast and a little surface area.
Also I'm wrapping around a 1/8 drill bit 6 times on dual coils with 24 ga. That way you can wick iTeo method and easier to feed in the coil with a bigger ID.
Instead of twisted coils try parallel instead. Heats up fast and a little surface area.
Also I'm wrapping around a 1/8 drill bit 6 times on dual coils with 24 ga. That way you can wick iTeo method and easier to feed in the coil with a bigger ID.
and now I have Drifter over here reminding me that even as I am an experienced vaper/builder, that my building game is still relatively rudimentary.
LOL, wasn't my intention
I am glad that I was able to inspire you to try sub-ohm again tho Im glad you like that method of wicking now
Gonna try some of that Rayon everybody is talking about. Llooking to get some this weekend so I can experiment with it. Suppose to be a pretty good wicking medium from what I have been reading so I'm eager to try it out
Last edited:
I need some help. I seem to have done something to the switch on my black copper stingray clone. First, does Focaleecig sell the switch? If not, which mod aside from the Nemisis, do they sell that plays well with a Kick?
Well I don't have one, and it sure is tempting me!
.. I've been meaning to give parallel coils a go, but rebuilding doesn't really get my juices flowing if you know what I mean, so I tend not to think about the latest rebuilding methods so much. But, if it creates a better vape, then why not. I use a rounded toothpick to wrap my coils, and I don't use anything lower than 30 gauge ... I don't have drills bit, but I do have screwdrivers
I used to wrap on them, but the size made the resistance too high for the gauges that I use .. unless I do a 1/2 wrap LOL, wasn't my intention
Oh don't try to clean it up now Drifter, you were all like "but can you do this though?"
... j/k- Status
Similar threads
- Locked
