I just saw that....thanks 
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
I just saw that....thanks
Finally had some time to sit down and do a quick build on the Sat22, here is what I came up with for now
Nice and simple 1.2ohm coil, 5 wraps over 2.5mm wicked with Rayon, comes out to around 15W on a fresh battery.
Here is a shot of the reduced chamber:
I just filled the tank and waited around 5 min and it soaked the wick perfectly from below.
First vape and I was just amazed, for its tighter draw I blew one heck of a huge cloud and the flavor was insanely good!
I thought the Heron was great on flavor because of its small chamber but the Sat22 takes tiny chambers to another level
So first impressions of its vape were quite good. Gonna spend tonight with it and try a SS mesh wick later this weekend.
If it does this well with rayon I can only image what the mesh will taste like
Nice and simple 1.2ohm coil, 5 wraps over 2.5mm wicked with Rayon, comes out to around 15W on a fresh battery.
Here is a shot of the reduced chamber:
I just filled the tank and waited around 5 min and it soaked the wick perfectly from below.
First vape and I was just amazed, for its tighter draw I blew one heck of a huge cloud and the flavor was insanely good!
I thought the Heron was great on flavor because of its small chamber but the Sat22 takes tiny chambers to another level
So first impressions of its vape were quite good. Gonna spend tonight with it and try a SS mesh wick later this weekend.
If it does this well with rayon I can only image what the mesh will taste like
Tonight rotation with my new toy All in 18350 mode
Don't mind the dirty brass, polish day Sunday
All in 18350 mode
Don't mind the dirty brass, polish day Sunday
Got the Orchid back up and running, didn't break down coils, so still running the same 0.55ohm build, and put in the same juice I got in my magma, wow I am sold on this Orchid for flavor, the flavor is as good, if not better than the magma, I actually have put up the magma over the Orchid.
I was concerned getting the V1 with no fill port, but I didn't have any problems filling it from the bottom, and got maximum juice capacity filling it from the bottom, yes it would be easier to have a fill port, but not a big deal to me, I'll probably add one of the kayfun top fill caps to a order next time I order from FT.
If it wasn't for the only 2.5mil juice capacity, I would jump on more of these, but I do think this will be addressed in future versions, so may hold off for a while and see what comes next, but that V3 does look pretty damn smart though
I was concerned getting the V1 with no fill port, but I didn't have any problems filling it from the bottom, and got maximum juice capacity filling it from the bottom, yes it would be easier to have a fill port, but not a big deal to me, I'll probably add one of the kayfun top fill caps to a order next time I order from FT.
If it wasn't for the only 2.5mil juice capacity, I would jump on more of these, but I do think this will be addressed in future versions, so may hold off for a while and see what comes next, but that V3 does look pretty damn smart though
Okay, I've got the Orchid up and running. 26 gauge 8 wrap dual coil came out at .50 running at 19 watts on the DNA30. WOW! I think I need to play around with the wattage and 0% possibility of putting it on the Kato until Drifters parts arrive because it sits down in and looks stupid so the Taifun can stay where it's at. You were all so right, flavor is amazing even with a new build.
Here is my lineup for the weekend...Kato w/Taifun .55 ohms, BAM with gold Fogger V4 .4 ohms and the Orchid with a Stingray tip on the DNA 30 .5 ohms.
Here is my lineup for the weekend...Kato w/Taifun .55 ohms, BAM with gold Fogger V4 .4 ohms and the Orchid with a Stingray tip on the DNA 30 .5 ohms.
You are a
Now you got me lung hitting, I going to mix up some max VG 0mg and see if can vape the house out tomorrow
Oh I need that Emoji in my life
.. I made you do lung hits, I made you do lung hits 
** ZNA UPDATE **
Specs:
316L stainless steel main body
Cloupor DNA 30 chip: ETA: THIS IS NOT A CLOUPOR CHIP. THIS CHIP FIRES STRAIGHT OUT OF SLEEP MODE WHICH THE CLOUPOR DNA CHIP DOES NOT DO .. CONTACTING MANUFACTURER TO DISCUSS. WILL UPDATE WHEN I HAVE MORE INFO.
.3-3.00 ohm
326 grams
silver plated copper contacts
18490 standard tube (18500 will not close up) It was designed as a 1:1 with the authentic ZNA which is made for AW 18490 batteries.
18650 tube available (sold separate, can use flat top battery)
I just made an interesting realization about this chip, which is that it fires straight out of sleep mode, no 2 sec delay like the Cloupor DNA chip. When I first began talking to Robbot Tech sometime ago they were going to us the Yihi sxa300 chip but had to change that plan because the Yihi chip is too large for this ZNA which has a narrower body and smaller display window than the Wotofo ZNA.
The Sales Manager at Robbot told me that they were going to use a Cloupor DNA chip instead, but perhaps I misunderstood her because I have a Cloupor DNA and as everyone who has one knows it does not fire straight out of sleep mode ... Well this Robbot ZNA does fire straight out of sleep mode. I have been intentionally letting it go to sleep over and over to make sure that this is correct, and it is. Perhaps she meant a DNA chip "like" Cloupor? All other characteristics of the Cloupor Chip is the same, except its behavior in sleep mode. Right now I am not sure, but I will certainly find out.
Specs:
316L stainless steel main body
Cloupor DNA 30 chip: ETA: THIS IS NOT A CLOUPOR CHIP. THIS CHIP FIRES STRAIGHT OUT OF SLEEP MODE WHICH THE CLOUPOR DNA CHIP DOES NOT DO .. CONTACTING MANUFACTURER TO DISCUSS. WILL UPDATE WHEN I HAVE MORE INFO.
.3-3.00 ohm
326 grams
silver plated copper contacts
18490 standard tube (18500 will not close up) It was designed as a 1:1 with the authentic ZNA which is made for AW 18490 batteries.
18650 tube available (sold separate, can use flat top battery)
I just made an interesting realization about this chip, which is that it fires straight out of sleep mode, no 2 sec delay like the Cloupor DNA chip. When I first began talking to Robbot Tech sometime ago they were going to us the Yihi sxa300 chip but had to change that plan because the Yihi chip is too large for this ZNA which has a narrower body and smaller display window than the Wotofo ZNA.
The Sales Manager at Robbot told me that they were going to use a Cloupor DNA chip instead, but perhaps I misunderstood her because I have a Cloupor DNA and as everyone who has one knows it does not fire straight out of sleep mode ... Well this Robbot ZNA does fire straight out of sleep mode. I have been intentionally letting it go to sleep over and over to make sure that this is correct, and it is. Perhaps she meant a DNA chip "like" Cloupor? All other characteristics of the Cloupor Chip is the same, except its behavior in sleep mode. Right now I am not sure, but I will certainly find out.
I'm a bit confused since I thought that the Kato only was large enough for 22mm atomizers. Since the Taifun fits now I want to know what's the largest that does fit?
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
I had issues getting the Taifun in because of the knurling but Nikki told me to put the bottom in first then turn it upside down and screw in the top and it works. My Fogger V4 I believe is 23 and it fits. Please correct me if I'm wrong guys.
Sweet porn Tami! Damn, I need to get my Kato flow going, I am jelly
You have nothing to be jealous about my dear, you're vaping the ZNA. BTW...who will be carrying this?
The Kato can fit up to 23.5mm, it was just the knarling around the Taifun that prevents its from being installed the usual way, through the ring. You have to install the base of the Taifun first through the open slot, the fill your tank and turn the Kato upside down and screw the base onto the tank.
Wouldn't be easier to just remove the 2 top screws on the Kato, then remove the top SS portion wth the ring, screw in the assembled Taifun and then just put the SS top back on?
Last edited:
If I had a Kato I'd remove that ring. I mean to say I'd cut if off and do away with it.
No, I take off the bottom to fill it anyway so it's just a matter of flipping the Kato upside down and screwing it back on. Only difference is, the bottom is attached to something.
I am loving it more now that I realize that it fires straight out of sleep mode .. Maybe I shouldn't say its not a Cloupor chip, its reasonable to think that the chip may have been updated since I got my Cloupor DNA 30. I will find out for sure from Robbot.
And I believe that FC has ordered it .. After I spoke with Robbot about doing a review for it, I sent the lead to Doris and told her to jump on it. Not sure when they will have it instock, but I assume that it will be soon .. and I think its going to their US warehouse, so that's a bonus
- Status
Similar threads
- Locked
