Focalecig ... A new Fasttech??

[TinaS]

My problem has been rectified by Doris. She apologized for the first email I was sent, is sending a new top cap and throwing in a freebie drip tip!

 

[zipflint]

May I ask how you got ahold of "Doris"? I think I need to do the same thing. I'm not placing another order with Focal until I get my pin situation sorted properly.
edit:
meant to add, please feel free to PM me your response so we don't derail the thread

My problem has been rectified by Doris. She apologized for the first email I was sent, is sending a new top cap and throwing in a freebie drip tip!

 

[haku]

Oh yeah, I forgot about that damn rice pin, I think I used a wire hangar for that. Real project mod that one.

Next time someone asks, the definitive FC Nemeses review is post #10675.

i also used a hanger wire lol (but also a brass bar for soldering)

whar is a god quality nemmy that comes with a quality switch from the get go?

sku 12631 of focalecig is the best nemesis i have (the best switch and quality).
the magnets upgrades and other improvements are optional. you can use the mod from the get go perfectly

 

[G-weezy]

Hey ya. Wanted to stop by and say hi. Will be MIA for a bit. Getting the ride put together and some major vape builds for the show. Be busy these weeks. Can't get any vapemail till this project is over.

 

[SlickWilly]

Hey ya. Wanted to stop by and say hi. Will be MIA for a bit. Getting the ride put together and some major vape builds for the show. Be busy these weeks. Can't get any vapemail till this project is over.

If you take me with you I'll carry your vape gear

 

[SlickWilly]

Yahoo! I got vape mail today! The Hanna DNA30 came! Everything looks great but it's smaller then I expected, I like it! I set it at the same 10W I vape my dripper on and WOW, this thing is hitting much harder then my Vamo, I backed it down to 7W to get the same vape. The Vamo and dripper were my first step up from twist type battery's and clearo's so I don't really have a lot of experience of what I should expect with different coils and settings. So now I'm wondering if the Vamo was putting out what it should or what's going on, I'll retrieve my good Fluke meter tonight and check the voltage on both. I'm excited make some new coils and try it with my Fogger on it, I've been limited with the Vamo.

 

[Eskimedic926]

Finally got my Kayfun Lite+ V2 in!!!
Loving it so far. Impeccable quality!!!

 

[TamiPac]

I keep checking FC to see if they have the ZNA30 Robbot up yet and as of now no! Does anyone have any experience with their seckill sales? I just can't figure out how they work. I go to the page and wait for the hour to hit and nothing happens.

 

[Nikkita6]

Hey Nikkita6 got a possible product
Shenzhen Factory Ijoye Hybrid 18650 BBM Lyncan Mod, 1:1 Clone SS BBM Mod, View 1:1 Clone SS BBM Mod, VaporIjoye Product Details from Shenzhen Ijoye Technology Co., Ltd. on Alibaba.com

You think maybe you could work some magic and get it (or better maker if there is one) to the US...preferably with no logo on the button (insert charming smile here)

Hey Cramer .. FC would have to look into a different source because I know from experience that iJoye doesn't supply to domestic markets. Many months ago when the 4nine hit, iJoye was the only company making a true Female 4nine with SS switch and female Maki logo, so I gave the info to FC and when iJoye realized they were a chinese company they would not supply to them.

 

[Nikkita6]

haha Nik, lets go! china here we come ;0) but ya, it would be nice to know what chips in that puppy! I really like the idea of a potential 5200 mah! that would get me through a weekend up at the river hahaha....

So the Vaporflask has a built in lipo? I looked at the listing but I couldn't see a lot of detail on it, but I like how different looking it is.

 

[Nikkita6]

my problem has been rectified by doris. She apologized for the first email i was sent, is sending a new top cap and throwing in a freebie drip tip!

;-) :d ....

 

[inswva]

So the Vaporflask has a built in lipo? I looked at the listing but I couldn't see a lot of detail on it, but I like how different looking it is.

Original has two 18650 cells. VTC5s, I believe.

 

[Nikkita6]

Yahoo! I got vape mail today! The Hanna DNA30 came! Everything looks great but it's smaller then I expected, I like it! I set it at the same 10W I vape my dripper on and WOW, this thing is hitting much harder then my Vamo, I backed it down to 7W to get the same vape. The Vamo and dripper were my first step up from twist type battery's and clearo's so I don't really have a lot of experience of what I should expect with different coils and settings. So now I'm wondering if the Vamo was putting out what it should or what's going on, I'll retrieve my good Fluke meter tonight and check the voltage on both. I'm excited make some new coils and try it with my Fogger on it, I've been limited with the Vamo.

The Vamo is a pulse width modulated device while the Hana clones have flat DC signals, so how they deliver power is different, and is reflected in the vape experience. When I used a Vamo I would never set it over 4.5v as I found the vape to harsh and scratchy .. I never get that with the Cloupor Hana or either ZNA 30 clone.

A well made Vamo usually has near accurate voltage output according to its setting, but that pulse width modulation is the killer .. You will get a smoother vape with flat DC signal devices, even at higher volts/wattage based on my own experience.

 

[Nikkita6]

I keep checking FC to see if they have the ZNA30 Robbot up yet and as of now no! Does anyone have any experience with their seckill sales? I just can't figure out how they work. I go to the page and wait for the hour to hit and nothing happens.

Patience grasshopper, Doris said last night that they are listing it sometime tonight, which is their morning .. Just a little while longer hun

 

[Nikkita6]

Original has two 18650 cells. VTC5s, I believe.

Aha .. I have to go look at it again, the body seems so sleek to have two 650's in it. I think I may have to pressure Doris for this one, because I am intrigued now This would make the perfect B-day gift too

 

[TamiPac]

Patience grasshopper, Doris said last night that they are listing it sometime tonight, which is their morning .. Just a little while longer hun

My meager helping of patience was used up raising my kids

So, to self pacify, when the ZNA wasn't there yet I bought the big Orchid for my 26650's

 

[Nikkita6]

What do you guys think of this one? Ghost modder clone Available! Stainless steel Dusza mods by Hawsion e-cig mod wholesale price, View Dusza mods , hawsion Product Details from Shenzhen Haosheng Hardware Products Co., Ltd. on Alibaba.com

I am a little over mechanicals, but the engravings are so sweet on this one.

 

[Nikkita6]

My meager helping of patience was used up raising my kids

So, to self pacify, when the ZNA wasn't there yet I bought the big Orchid for my 26650's

Tami you are so Gangsta its unreal .. Its coming, she said they are in the US warehouse now, they just need to upload photos and had to get warranty stickers and stuff.

I actually had my eye on the 26650 Orchid, but went with the V3 instead .. Now Nelson has my mind all messed up with this Vaporflask that I suddenly feel like I must have. Doris did ask me what I wanted for my Birthday, and I told her the Vaporflask so now she has to do it

 

[TamiPac]

Tami you are so Gangsta its unreal .. Its coming, she said they are in the US warehouse now, they just need to upload photos and had to get warranty stickers and stuff.

I actually had my eye on the 26650 Orchid, but went with the V3 instead .. Now Nelson has my mind all messed up with this Vaporflask that I suddenly feel like I must have. Doris did ask me what I wanted for my Birthday, and I told her the Vaporflask so now she has to do it

Excellent, Nikki's getting a flask!!!

You can buy an Orchid V3 AND a huge one....just sayin', I did!

 

[nelsonm64]

So the Vaporflask has a built in lipo? I looked at the listing but I couldn't see a lot of detail on it, but I like how different looking it is.

you know, I didn't think to look at what the clone uses... the original uses dual 18650's. hmmm.