Focalecig ... A new Fasttech??

[roxynoodle]

Hope your problems are gone for ever.

Have you isolated anything else? ( posts, pos.deck? )

I measured my 6 decks ( FC + FT Ivogo ) and the base ( with no 510 screw inside ) - here are 2 samples


View attachment 388110




View attachment 388111


My SQR works right now, but I`m afraid to use it again. The "coating" is sh.... I`ve checked the upper edges of the post holes with a strong magnifier. The edges are very rough and some areas have no "coating". Because there is not much space between post and deck, it`s only a question of time when the positive post will get contact to the deck. If this happens while firing from a regulated mod, the mod is gone. I like the SQR, but not this one. It doesn`t make sence to save some money and kill your mods or .... . I will buy an Ematal clone version ( ehpro has one afaik ) or the original.
I will smash the decks and keep the shell for spare parts or build a lttle led inside.

FT one is already shipped back

Yes, the coating is not uniform on the decks. So the coil placement has to be exactly right or it will read like 0.1-0.5 ohms (for a 1.5 ohm coil). Its a clone I won't be using a long time I'm sure. I'm on the fence about buying an authentic. So expensive, but none of the clones are worth spit. Over the next few days I'm going to strongly evaluate whether I think its worth it. I have a feeling there won't be any better clones coming either with how quickly even the no logo ones have been pulled.

But, for the time being anyway, I'm hoping I can enjoy this one safely.

 

[Nailz]

Vapemail, Lancia

Already been cleaned and built, and so far I am really liking a lot, more vapor than my magma, and flavor is on par with the magma, built with duals coming in and 0.40ohms and it does not seem as hot vape as the magma, which is another plus for me, like warm vape not hot, I'm using the 2nd biggest hole in 2 holes, plugs fit in good, and love the look of this thing, did think the tank came off a little to easy and was concerned if picked it up by the tank it would come apart, so I did beef up the orings on it and now better, great they provide a spare glass tank too, really good deal, now the magma can collect dust for a while

 

[Nikkita6]

I have confirmed that Yosen is in fact the manufacturer of the Infinite's not yet released Zero Modz clone. As a matter fact, Yosen is also the manufacturer of a few of Infiinite's products including the Infinite SAT22 Genesis style atomizer, which Yosen also sent me with my Zero order.

I have reason to believe that Infinite may be dropping the Zero from their planned new releases due to all of the exposure and direct sale that Yosen has received as a result of this Zero Modz clone. I know from prior experiences that Infinite does not like it when one of their manufacturers does direct trade with the market .. There is no reason for any vendor to pay Infinite's marked up prices when the Zero Modz can be sourced direct from Yosen.

 

[Nikkita6]

Well that looks sexy as hell set up with your Hanaa, nice job boo boo

Vapemail, Lancia

Already been cleaned and built, and so far I am really liking a lot, more vapor than my magma, and flavor is on par with the magma, built with duals coming in and 0.40ohms and it does seem as hot vape as the magma, which is another plus for me, like warm vape not hot, I'm using the 2nd biggest hole in 2 holes, plugs fit in good, and love the look of this thing, did think the tank came off a little to easy and was concerned if picked it up by the tank it would come apart, so I did beef up the orings on it and now better, great they provide a spare glass tank too, really good deal, now the magma can collect dust for a while

 

[inswva]

Vaportek now has the Variant clone up for pre-order. $189.

 

[Nailz]

Well that looks sexy as hell set up with your Hanaa, nice job boo boo

Thank you, and yes loving the look of this Lancia and great vape too

 

[hobbes4]

I have a lot of insight and information into this one because I have a relation with Psmoke and Limwell and they both sent me early pics of the clone that I contributed to a product article published on VC. I love the way the clone looks however there is one major issue ... the price.

First off, Psmoke and Limwell are wholesaling the body, lipo battery and charger separately, so the vendor must buy all individual pieces just to make a 1pc mod .. For all pieces this device is $150 USD WHOLESALE ... which would explain why those who are running pre orders for it are priced at $225. This is just way too high for a clone market.

I was really looking forward to this one a lot .. but at this price point they have lost their target audience. China needs to get out of the mentality that just because the clone is priced less than the authentic that people will automatically buy it .. they won't. Once price points go over $75 you loose half of the clone market. Price it at $100 or more, you lose another 1/4, priced over $200 you have lost nearly the whole market.

There may be authentic buyers who will go for it, but I doubt there will be very many who are willing to pay that kind of money for a China made clone ... especially when you can get an authentic in the Yihi SX Mini which is also upgradeable and priced under $200.

My prediction is that the wholesale pricing will eventually come down, and I hope it does because like I said I am interested in it, the photos of the actual clone are beautiful.

I saw Vaportek running a pre order for $188 and thought maybe since it's under $200 but you're right, the price will probably come down some and by that time the SX Mini will be out so I can see the reviews on both.

Also, if I like the Zero as much as I think I will I may not even be in the market for another box right now.

Damn it, you got me thinking all rationally now. That's not supposed to happen with vape gear.

 

[Nikkita6]

GOOD NEWS ZERO MODZ'S LOVERS .... THE KEY IS REMOVABLE Apparently the tolerances were just really tight, and it is not glued in at all. I wish Yosen would have said "No Nicole, you are mistaken. We did not glue it"

You will still need a flat head screwdriver to pop it out, I was trying it with my fingernails before But hooray, we have our battery screwdriver/key tool

 

[Nikkita6]

I saw Vaportek running a pre order for $188 and thought maybe since it's under $200 but you're right, the price will probably come down some and by that time the SX Mini will be out so I can see the reviews on both.

Also, if I like the Zero as much as I think I will I may not even be in the market for another box right now.

Damn it, you got me thinking all rationally now. That's not supposed to happen with vape gear.

Listen, we vapers have to stick together! I say that no one should buy it because it sends the wrong message to the manufacturer. Let it is sit on the market with low sales, and then watch the price drop!

The Zero is pricey too, but I feel like the amount of work that goes into making one justifies the price. Not to mention with the ability to change the appearance with ease, and battery as well. Psmoke and Limwell went too far by pricing wholesale for the body with no battery or charger at 130pc, then charging additional for the battery, and charger. I think the Variant clone should be priced at 150USD retail, and no higher .. with battery and charger.

I wonder if Vaportek is forgoing the charger or battery component? Or if they are basing pricing on a 100 plus piece order?? The prices drop a little after 100pcs ..

 

[Nikkita6]

Oh and trust and believe that I will be putting out the best of my powers of persuasion to make the SX Mini happen ;-)

 

[Nailz]

GOOD NEWS ZERO MODZ'S LOVERS .... THE KEY IS REMOVABLE Apparently the tolerances were just really tight, and it is not glued in at all. I wish Yosen would have said "No Nicole, you are mistaken. We did not glue it"

You will still need a flat head screwdriver to pop it out, I was trying it with my fingernails before But hooray, we have our battery screwdriver/key tool

So you need a screwdriver to get to the screwdriver that comes with the zero

Better than it just falling out though, as sure to be lost, I would guess after a while it would come out easier

 

[TamiPac]

So you need a screwdriver to get to the screwdriver that comes with the zero

Better than it just falling out though, as sure to be lost, I would guess after a while it would come out easier

I guess they forgot to "age" the wood around the key

 

[cindycated]

My problem is I don't want to pull it back out, lol! I literally did the work on the base and its in there tight.

I did put details in the Squape R clone thread in the Rebuildable Atomizer section though.

haha I know how that feels. Mine's still on my mod from a couple of days ago and I'm afraid to mess with it. I've refilled it a bunch of times. That's about how far I'm willing to go. Working great. Even the logo's lined up!

 

[cindycated]

I am thinking about using Vape Goddess myself

Does your photo editing software allow you to do layers, Nikki? Maybe we can come up with a transparent .png file for you, that you can lay over all your stuff.

 

[rhelton]

Hey all any one have experience with this copper little boy dripper I really like the looks of this one. Im not sweating the whole copper/brass thing but I heard these leak real easy is that true?

It looks pretty cool but I dont want a leaker

$10.18 Little Boy Style Rebuildable Dripping Atomizer - Copper

 

[cindycated]

So you need a screwdriver to get to the screwdriver that comes with the zero

Better than it just falling out though, as sure to be lost, I would guess after a while it would come out easier

Dude, just grind it down a bit and glue a magnet in there before you stick it back in the hole.

oh wait. that didn't sound right...

 

[Nikkita6]

So you need a screwdriver to get to the screwdriver that comes with the zero

Better than it just falling out though, as sure to be lost, I would guess after a while it would come out easier

Yeah I am sure it will loosen up over time Just glad the little bugger is not glued down after all I got some slightly disappointing news though Yosen just skyped me that only the black carbon fiber and silver sleeves are ready to ship Sunday HKT, so they asked me to accept those instead because I need them ASAP for this review .. oh well, beggers can't be choosey Its not too bad, I originally wanted the silver LE sleeve

 

[Nikkita6]

Does your photo editing software allow you to do layers, Nikki? Maybe we can come up with a transparent .png file for you, that you can lay over all your stuff.

Yes, I believe my Serif plus programs allows me to add layers ... but that is yet another step added to my already lengthy process Sigh ... ok

Does this mean that you are gonna make it for me? If yes, use Nicole Lea, I was only kidding about the Vape Goddess thing

 

[SlickWilly]

Yes, I believe my Serif plus programs allows me to add layers ... but that is yet another step added to my already lengthy process Sigh ... ok

Does this mean that you are gonna make it for me? If yes, use Nicole Lea, I was only kidding about the Vape Goddess thing

It's been a while since I've had to edit photos and I can't remember what program I used but you could create a water mark and it would apply it to all your photos if you set it that way, might want to check under your settings/options.

 

[halfempty]

Yes, I believe my Serif plus programs allows me to add layers ... but that is yet another step added to my already lengthy process Sigh ... ok

Does this mean that you are gonna make it for me? If yes, use Nicole Lea, I was only kidding about the Vape Goddess thing

I vote for keeping it Vape Goddess.