Lightroom.
There's a guy on an AR15 forum that always integrates his watermark in his pics (like I did in mine) so it doesn't ruin them but you know it's his.
Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
Lightroom.
There's a guy on an AR15 forum that always integrates his watermark in his pics (like I did in mine) so it doesn't ruin them but you know it's his.
Yeah I am sure it will loosen up over timeJust glad the little bugger is not glued down after all
Yosen just skyped me that only the black carbon fiber and silver sleeves are ready to ship Sunday HKT, so they asked me to accept those instead because I need them ASAP for this review .. oh well, beggers can't be choosey
Its not too bad, I originally wanted the silver LE sleeve
I used the force for you to get the black one, so I can see how it will look for me
Early morning porn, the lancia on stingray x with hybrid top cap, goes well together I think
Which stingray is that and where did you get top cap?Early morning porn, the lancia on stingray x with hybrid top cap, goes well together I think
Really looks sharp
I love your reviews Nikkita6 but I bit the bullet and chose the Variant over the sxmini. The reason for doing so is after callling a few stores none of them know what gauge of wiring is in the sxmini. I have seen a few post about people's stuff from china dying when they upgrade. I think I would like to get few reviews out on the sxmini before I bought it. Not that I wouldn't like to see a few reviews out on the variant out as well But in the variant's case, I spoke to the salesman and he said from his testing standpoint it seemed pretty solid. I hope it is. I think the price is due to the fact they are from PSMOKE's description using titanium in their clone. I think 189 was pretty reasonable since I spent $250 for my Hana. It's not the amount of money I will spend everyday tho Take care Nikkita6 and keep those reviews coming. So much good information there Wish me luck I may need it 
But in the variant's case, I spoke to the salesman and he said from his testing standpoint it seemed pretty solid. I hope it is. I think the price is due to the fact they are from PSMOKE's description using titanium in their clone. I think 189 was pretty reasonable since I spent $250 for my Hana. It's not the amount of money I will spend everyday tho Take care Nikkita6 and keep those reviews coming. So much good information there Wish me luck I may need it
Last edited:
I used the force for you to get the black one, so I can see how it will look for me
There has to be some truth to this 
I didn't want a black one, but I guess I am getting one anyway First and foremost I wanted them for review so that I could show what it would look like with other sleeves and to also make sure that the fitment is on point. I hope its not cheapy carbon fiber, although I have never seen or touched carbon fiber in real life, so .. I love your reviews Nikkita6 but I bit the bullet and chose the Variant over the sxmini. The reason for doing so is after callling a few stores none of them know what gauge of wiring is in the sxmini. I have seen a few post about people's stuff from china dying when they upgrade. I think I would like to get few reviews out on the sxmini before I bought it. Not that I wouldn't like to see a few reviews out on the variant out as well
Ok I can confirm beyond a shadow of a doubt that the Variant is not titanium, it is 304 grade stainless for one. There were several listings that said Titanium and I had Lareina from Psmoke confirm for me twice that is was 304 stainless, just FYI on that. If the vendor is doing a copy and paste from early descriptions that then is where the Titanium is coming from.
I have no doubt that this has the possiblity to be a very good clone because Psmoke/Limwell does very good work, so I expect the clone to be done well. I still want one, but I would feel better about it if the price came down. But if you receive it before I receive it, please come back and post your thoughts, as I would love to hear it.
Thank you so much for your kind words about my reviews as well dear
Your photo isn't displaying for me!I'm not an expert on these things, but I don't think this is what my center post insulator is supposed to look like.
The very best, kindest thing you can do for Momma and her kit is to have them fixed asap. Many areas have discounted spay/neuter clinics, in my area one I use is called "My Budget Vet". ETA- after reading further I see that this has already been mentioned several times, sorry for bringing it up again.I took pictures of her today, I will post pics later .. I have become attached, and I saw some big fat cat lurking around where I usually leave her food
FWIW I live on the end of a road and I find animals that SOB's throw away all the time. I'm sure there's a special place in hell for those who are cruel to animals...
Last edited:
Thanks for the clarification on it being stainless steel versus titanium.
I think the price was kind of high as well, but I really wanted a variant, with that being said I think the price could be lower especially since it doesn't contain no titanium.Your welcome mam. I was just speaking truthfully about your reviews. I even liked how you corrected me on the metal being used. I prefer to know the truth and speak it rather than read or say something that is incorrect. Titanium or stainless steel doesn't matter to me as much as having a solid product that works without serious glitches.
Thanks for pointing out the broken image link, I think (hope) it's fixed now.Your photo isn't displaying for me!
The very best, kindest thing you can do for Momma and her kit is to have them fixed asap. Many areas have discounted spay/neuter clinics, in my area one I use is called "My Budget Vet". ETA- after reading further I see that this has already been mentioned several times, sorry for bringing it up again.
FWIW I live on the end of a road and I find animals that SOB's throw away all the time. I'm sure there's a special place in hell for those who are cruel to animals...
Thumbs up on the cat advice, can't be said too many times.
Still broken.
Can't post pics from google docs.You can right click and open in new window to see.
Speaking of China suppliers...Has anyone here ever ordered from FastTeck or similar supplier and ran into problems with import taxes, duty fees, etc? I'm just a little leery of how they ship. Any one have any advice to offer in this area? Thanks in advance.
You get yelled at here for talking off topic. I tried asking about another chinese site that has a crap thread, didn't end well.
I ordered from Fasttech a few times. No issues with taxes or duty fees.
- Status
Similar threads
- Locked
