The reason I asked about the color, is that I was going to mail you my working Black Top Cap with Top Fill Holes, but since yours is silver it is not going to work.
Fogger V4!!
- Thread starter Shofixti
- Start date
- th_trl_thread_readers 0
- Status
What a very generous thought, in any event
I'll live with it like this, until I get tired of it. Quite frankly, it's a small price to pay for a fabulous vape!
Good deal!
Be safe out there in Wyoming, it is pretty windy out there as always. I'm on I-10 in Junction Texas.
Oh I'm in VA today locked in at the Petro on I-81 exit 29. Taking the day off to tinker with my vape gear. I just finished tweaking my Segelei 13A a bit more. I do run 80 a lot but not this week.
Sent from the open road using Tapatalk.
You can safely remove and discard it. Kayfun doesn't have it. I removed mine.
I just juiced mine, never had a problem.
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Guys and girls, I know this is a whole differed topic, but I don't have any idea where to start. I'm thinking to start mixing my DIY own E-Liquids. Do you have any suggestions how to start?
Yes! There's a ton of information in the DIY forum, but basically you want to order nicotine base (may as well get 100mg/ml), which you can freeze, PG and VG (Essential Depot for a gallon of each around $58 shipped), flavoring. The flavoring is up to you. There are a ton of recipes in the DIY forum! You'll also need some syringes, bottles - but not that much else. You can spend a fortune or less - beware, it's incredibly addictive!
I started reading the DIY and the first thing I see is: "THERE ARE NO FLAVOURS KNOWN TO BE SAFE FOR INHALATION"
LOL....that includes juice you buy! Better buy all the toys before you kick the bucket
I've read through most of this thread in two or three stints and let me say you guys are awesome
.
I bought a fogger off eBay because what I'd read so far made it sound like some next gen kayfun killing badassery. Turns out I ended up with the 4.3 which is a little bit of a bummer because the juice capacity was a major plus for me.
That said, 3.5 mls of borderline dripper action is still keeping me going strong.
When I got mine I built a modest .8ohm however many wraps of 28awg around 2mm I'd. Wicks stuffed in channels. Needless to say it was a cotton smoking machine.
Rewicked, nope
Built for same wattage with 1.5 mm coil, still dry
Rewicked some more and with the measliest amount of wick managed to l run a couple tanks through it with only the occasional chainvaping dry hit.
When I saw the kayfun style build though it all made sense. (Tucked cotton after chimney install.)
I think when they eliminated the horizontal channels is when they intended for it to be wicked this way. So far so good with it setup like this and its a dream vape.
The only thing keeping me from calling it a kayfun killer is that the flavor is just barely lacking in comparison, but I believe the airflow could take me into .5 ohm heaven.
Thanks again guys. Let's see what really happens with this 4.4 I might just be in the market for one.
.
I bought a fogger off eBay because what I'd read so far made it sound like some next gen kayfun killing badassery. Turns out I ended up with the 4.3 which is a little bit of a bummer because the juice capacity was a major plus for me.
That said, 3.5 mls of borderline dripper action is still keeping me going strong.
When I got mine I built a modest .8ohm however many wraps of 28awg around 2mm I'd. Wicks stuffed in channels. Needless to say it was a cotton smoking machine.
Rewicked, nope
Built for same wattage with 1.5 mm coil, still dry
Rewicked some more and with the measliest amount of wick managed to l run a couple tanks through it with only the occasional chainvaping dry hit.
When I saw the kayfun style build though it all made sense. (Tucked cotton after chimney install.)
I think when they eliminated the horizontal channels is when they intended for it to be wicked this way. So far so good with it setup like this and its a dream vape.
The only thing keeping me from calling it a kayfun killer is that the flavor is just barely lacking in comparison, but I believe the airflow could take me into .5 ohm heaven.
Thanks again guys. Let's see what really happens with this 4.4 I might just be in the market for one.
My 4.3 is doing just fine after several days and different altitude and temperature/humidity. Not a single bad hit.
4.2 however, delivered a nasty, burnt dry hit with no fair warning. Have you tasted a burnet rayon? My command of the English language is not advanced enough to describe it. It was so bad that it could "gag a maggot". It was so bad, that my taste buds went on strike and refused to taste anything for the rest of the day.
4.2 however, delivered a nasty, burnt dry hit with no fair warning. Have you tasted a burnet rayon? My command of the English language is not advanced enough to describe it. It was so bad that it could "gag a maggot". It was so bad, that my taste buds went on strike and refused to taste anything for the rest of the day.
Well, as a chain vapor-er (? LOL) I'm the queen of getting dry hits on cotton! It says a lot that I have yet to get a really dry hit with the rayon - merely a suggestion that it was about to happen, or at worst a mini dry hit! From what you describe it's definitely something to be avoided!
Thanks for the advice, but I could put a kf tip in my kayfun and get better flavor too but IMHO the fogger doesn't seem like its going to produce a flavor experience better than 95% of that of a kayfun. That said everything else about the fogger is cool enough that I wouldnt take my kayfun to a desert island before a fogger
That's the scary part: There was no warning. Not a hint. I would take a vape every 3 to 5 minutes. And the puff prior to the bad one was nice and juicy. And BAM, like a slap in the face. I must have been all that different altitude driving. I'm still vaping on it and it is wicking fine, I didn't re-wick it. Only I'm at lower altitude now. I'm in Houston, TX. It's poring rain at 85F and the sky is made out of lead.
Lots of people are getting better flavor than a kf, including myself, if you pay some pics of your build at may get you there.
so would a fogger v4 out perform an EHpro kayfun lite clone? trying to make this decision quick as i want an RTA for my cana modz but cant decide -_-.
- Status
Similar threads
- Locked
