So your wick is not laying over top the juice channel at all?
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Fogger V4!!
- Thread starter Shofixti
- Start date
- th_trl_thread_readers 0
- Status
So your wick is not laying over top the juice channel at all?
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
You can't force the issue...on a mechanical device a 0.8ohm coil would vape at around 20watts that is with a great set up and accounting for voltage drop. I have a similar set up to yours and it works fantastic at 20 watts but at 30 watts I will start getting dry hits regularly. Were you running the same set up at 30 watts on another atomizer?
Anyway, if your still getting dry hits at 20 watts try some of the suggestions given. I myself set it up where very little cotton goes into the vertical channels while most of the cottons stay above the channels....I never get dry hits and never get leaking problems.
Thinking about getting the 4.1 (what we refer to 4.4). Any reports on it's performance?
correct......
after chimney goes on, but before cap.....i move all rayon away from the openings of juice channels
i want as much juice to get to more area of wick as i can. dont want anything slowing it down.
if you put it on top of or some into channels, the juice has to travel through small amounts of wick to get to where you really want it
going to have to remove the quad coils in the fogger today........
went through 23mls of juice in it yesterday...
and its in a rotation of 4 other atties.....
its making my dual coil kayfuns inadequate
its just too damned good!
went through 23mls of juice in it yesterday...
and its in a rotation of 4 other atties.....
its making my dual coil kayfuns inadequate
its just too damned good!
Hahaha! That's about how much of your juice I ran through today I've got 1 tank of ub left.... Super Bomb brother! Your the man!
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
The unicorn milk is pretty dope, I like em all!
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
I have got a fogger coming from focalecig, but decided I didn't want to wait for it, and wanted to try the newest fogger, so ordered the 4.1 (4.4) from ebay, and turned up today, done micro coils coming out at 0.5ohms, I wicked it by cutting the cotton pretty much level with the chimney and then gently pushed down on the deck, the coils was not the prettiest, got to get use to wrapping around the screws.
Got to say it is vaping like a champ right now, not getting any dry hits or leaking, every few hits I see a little bubble come up from the deck, so seems to wicking good, flavor is really good and tons of vape.
Got to say it is vaping like a champ right now, not getting any dry hits or leaking, every few hits I see a little bubble come up from the deck, so seems to wicking good, flavor is really good and tons of vape.
I have no interest in 26650 mods and atomizers. But those all look like decent improvements, especially making the 510 connector the correct size. I'm sure you'll let us know how it is once you have one in hand.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Craptastical. I lost the iny washer on the fill screw. Looked in the extra package and didn't find one there. Anybody know where I could get a replacement?
Last edited:
I lost one of mine the first ten seconds I had it, it's no problem, no leaks.
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
Heeeheehee in case anyone is interested... The IPV 35W Is avail in the coop planning forum! Perfect for running a fogger
Burping out loud using Tapatalk
Burping out loud using Tapatalk
In other news, my oldest fogger (4.2) has officially started to rust after an overnight isopropyl soak.
No noticeable rust anywhere on the atty, EXCEPT for the area that is hidden under the o ring within the top cap. Not too pleased
Burping out loud using Tapatalk
No noticeable rust anywhere on the atty, EXCEPT for the area that is hidden under the o ring within the top cap. Not too pleased
Burping out loud using Tapatalk
Currently enjoying Virginia Flue Cured in the BIG fogger on a 26650 SX300 Pioneer4you and Dunhill in the V4+ on a lil old EVIC supreme. Just got the parts to make a 26650 SX350 box mod, well go good with the new BIG fogger
.Do you use that rayon straight out of the box or do you boil it/wash it first? No problems with cotton but like to experiment and ordered a box from Sallys!
Love the kitty pic bsop when I first saw it I thought hey those look like my kitties!
Unless it was rusting with Juice in it, I wouldn't be too concerned. Anything will oxidize if it's exposed to the right chemical. The question is, will it oxidize when exposed to Juice?
From what the people in the know have to say, boiling isn't needed.
Hi!
'm a long time lurker, first time poster! I Have a Fogger V4.3 and a Big Fogger. To me the design and performance of the Foggers is the best out there! I just wish they had more quality in manufacturing! All the threads are crunchy and loose making them easy to cross thread (ask me how I know) also they use some kind of stainless alloy (supposed to be SAE 304) that is weaker and tarnish/corrodes that the stainless used by EHPro or Tobeco! When I soaked my new Foggers in Isopropyl overnight, it stained/corroded them and Iv'e not had that problem wit any other manufacturers tanks!
I've got a V4.4 coming from Frog in Fog, I certainly won't let it sit in isopropyl overnight! By the way, my experience with Frog in Fog has been good, Great customer service and the shipping is much faster than Fast Tech!
'm a long time lurker, first time poster! I Have a Fogger V4.3 and a Big Fogger. To me the design and performance of the Foggers is the best out there! I just wish they had more quality in manufacturing! All the threads are crunchy and loose making them easy to cross thread (ask me how I know) also they use some kind of stainless alloy (supposed to be SAE 304) that is weaker and tarnish/corrodes that the stainless used by EHPro or Tobeco! When I soaked my new Foggers in Isopropyl overnight, it stained/corroded them and Iv'e not had that problem wit any other manufacturers tanks!
I've got a V4.4 coming from Frog in Fog, I certainly won't let it sit in isopropyl overnight! By the way, my experience with Frog in Fog has been good, Great customer service and the shipping is much faster than Fast Tech!
- Status
Similar threads
- Locked
