Fogger V4!!

Status
Not open for further replies.

AMDTrucking

Ultra Member
ECF Veteran
Dec 7, 2013
1,950
3,232
California
If people are still asking: "How do you know you have a 4.3?" in this thread, then the World is going to Hell in a hand basket and people are just too lazy to scroll their screen up...

@Sptz, please read up just a few pages back in this thread and you will find a full pictorial side-by-side comparison on page 99 and many written explanation about this issue all throughout this thread.
 

AMDTrucking

Ultra Member
ECF Veteran
Dec 7, 2013
1,950
3,232
California
Used working Wick and Coil I took out of my V4.3 built in Stuffy method way - it worked perfectly fine.

DTAXXxK.jpg
 

Tbev

Unregistered Supplier
ECF Veteran
Oct 22, 2013
5,674
12,660
SoCal-Vegas
instagram.com
Yeah, rxw ceramic xc -116, I still have a piece taking up space in my favorite genny, soaked with juice for a month, I wrapped it Fcuking perfectly, and it's crap. Lots of people swear by it, I think it tastes like crap.
I used it in fv4 and it was not great.

Sent from my Transformer TF101 using Tapatalk
 
I just got my replacement tanks, fastest shipping ever from TX. And they were like $6 bucks. Vapercompany.Com rocks!

Sent from my Transformer TF101 using Tapatalk
I checked on them today. Unfortunately, they dont sell the part I am looking for.

Does anybody know where I could get the positive block, or the full base for the 4.3?
 

BNEAT

Ultra Member
ECF Veteran
Mar 25, 2013
2,509
5,549
62
Louisville, Kentucky
I checked on them today. Unfortunately, they dont sell the part I am looking for.

Does anybody know where I could get the positive block, or the full base for the 4.3?

I doubt you'll find replacement parts for such an inexpensive tank. If you really want to salvage it, try putting over-sized screws in it. They come with M1.6 x .35, and the next size up is M1.7 x .35, which MIGHT screw right in. The next size after that is M2 x .4 which would require drilling and tapping...NOT cost effective.
 
I doubt you'll find replacement parts for such an inexpensive tank. If you really want to salvage it, try putting over-sized screws in it. They come with M1.6 x .35, and the next size up is M1.7 x .35, which MIGHT screw right in. The next size after that is M2 x .4 which would require drilling and tapping...NOT cost effective.

With a quick google search I couldn't find that size, but there was sever taps in that size. Plus I am sure I would have to buy more than one. I guess I'll shelf it and do periodic searches on ebay or wait for the next version....I miss the airflow!:(
 

AMDTrucking

Ultra Member
ECF Veteran
Dec 7, 2013
1,950
3,232
California
I have a request. Could any of you take a look at this one in eBay and tell me which version it is (.1,.2,.3)? It looks like the one I have now, which is supposed to be the V4.3, but I am not sure of the absolute details of the differences.
Here it is
Thanks a bunch in advance!

It is V4.2 100%!!!

Edit: Now, that I looked at all the pictures: Some of them are 4.2 and some of them are 4.3
The pictures that the seller downloaded from the web are 4.2 and the ones he took himself are 4.3.
Therefore it is 4.3 he is selling
Was this a trick question?
 
Last edited:

AMDTrucking

Ultra Member
ECF Veteran
Dec 7, 2013
1,950
3,232
California
That's a very kind offer! Let me see how it goes with the regular fill hole - if I get totally annoyed with it, I'll send it to you :)

Thanks Amanda,
I received your generous amount of Rayon and already am testing it. Or should I say tasting it...
I rebuilt both 4.2 and 4.3 with identical 0.6 Ohm flat ribbon coils and RAYON. About 22 Watts on a Mach.
So far - so good, no complaints. I'm leaving for New Orleans tomorrow morning, let's see how my Foggers will do under different pressure conditions. I'll be going through some altitude changes from 0 up to 4500 Feet above sea level. When I do that, that's when my tanks begin to leak.
Again, thank you!
It is very good wicking material, I love it.
 

AMDTrucking

Ultra Member
ECF Veteran
Dec 7, 2013
1,950
3,232
California
Here are my latest discovery using Foggers V4.2 and V4.3

I have them both setup identically with 0.6 Ohms dual coils made of 0.6mm flat ribbon and Rayon wicks in a "Turkey stuffing way" with absolutely no wicking material in the juice channels. I use the same e-liquid in both.

V4.2 is quitter, tastier, cooler and smoother (less throat hit) vape experience. BUT, because, due to it's smaller chamber, the wick holds less liquid and I, occasionally, get a dry hit when chain vaping. This one is good for your first vape in the morning. It's capacity is advertised falsely, it can only hold 4.75 LM, that's 1.75 ML more then 4.3 - No big deal.

V4.3 is louder, tasty enough, warmer and harder (more throat hit) vape and it's larger chamber is capable of keeping up with my chain vaping. This is my "Afternoon Delight".

I vote for V4.3 because even though it can hold 1.75 ML less then 4.2. I like it better because that big deck allows for more building experiments and, in my opinion, the juice channel are just a right size to conduct juice flow efficiently if not obstructed by wicking material. The last, but not least, is that occasional dry hit in 4.2 is a "Deal Breaker" for me big time.

Those are my own personal experiences, take them for all they are worth. And, of course, YMMV.
 
Status
Not open for further replies.

Users who are viewing this thread