Fogger V4!!

[Nailz]

I believe its the frog that has the metal tank along with replacement glass tanks. Ordering from China for this sort of item shouldn't be too much a problem, it can take awhile and its not like you need the item tomorrow. As an alternative, spend $20 (double the $10 price of just the metal tank) and get a clone with both metal and glass tanks from focalecig. Nobody's reported on the quality of them yet, just offering it as an alternative.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

I got one coming from focalecig, it is in chicago, so hopefully will get it by the weekend

 

[AMDTrucking]

What do you guys think about my new AGA-T7 build?

I knew AGA-T7 could do better.
I took two coils of 1.0 ohm each and put them one into the other. One, the inner coil is made of 0.6 mm Kanthat ribbon and the outer of 0.8 mm. I put a layer of Rayon in-between the coils and added more Rayon on the outside to prevent leaking. All that while keeping a hole in the middle of the inner coil unobstructed. I then placed this Hybrid Dual Coil/Rayon assembly right over the Airflow.
Well, I think it blows Fogger out of the water now. IMO.

 

[Tbev]

That's dope, I think that's about the sickest build possible for that thing, yeah? Rayon is Really raising the bar. Throw that in the rayon thread.

 

[AMDTrucking]

That's dope, I think that's about the sickest build possible for that thing, yeah? Rayon is Really raising the bar. Throw that in the rayon thread.

I did. "Sick as teeth!"

But it a "Beatch" to re-wick though.

 

[roosterado]

I just read all 1904 replies to this thread! Right. I think I will just order 1 and watch some UTube tutorials to build it.

 

[AMDTrucking]

That's dope, I think that's about the sickest build possible for that thing, yeah? Rayon is Really raising the bar. Throw that in the rayon thread.

That "Bar" was raised so high, then when it fell it knocked me on my head...
As I was enjoying my "Sick as Theeth" AGA-T7 build, the UPS truck arrived. I placed my Chi You Mechanical Mod upright on my desk and went to gem my Vape Mail. I thought I put the safety ring on. I thought wrong.
The Mod was hot enough to burn the skin.
Long story - short: The VTC5 battery was dead and the Rayon Wick was a little yellowish - brownish inside, but still usable. Luckily for me it ran out of the battery power before it ran out of liquid.
Looks like this Rayon can really take a punch!

 

[dbeast64]

I've been thinking about one but,with their numbering system,which is the newest and most improved one OR the best one???

 

[AMDTrucking]

I've been thinking about one but,with their numbering system,which is the newest and most improved one OR the best one???

This one: Stainless Fogger V4 RBA Atomizer Ships Free USA Seller in Stock | eBay

EDIT: That one ran out. Try this one: http://www.ebay.com/itm/Stainless-F...599?pt=LH_DefaultDomain_0&hash=item35d93a079f

 

[AMDTrucking]

Fogger 4.0 Revision Identifier:

 

[Jdbaker82]

angelcigs has fogger v4 on sale for $23 but I can't figure out which version it is... can anyone look and see

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

 

[AMDTrucking]

angelcigs has fogger v4 on sale for $23 but I can't figure out which version it is... can anyone look and see

Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2

$23.99 looks like V4.2 or a clone because it doesn't have cupper 510 screw.
$24.99 looks the same, but it looks to me that the chimney is made out of brass. Or it is just a lighting of photography.

IMO. Neither one is the Authentic Fogger V4.1 (4.4)

 

[AMDTrucking]

What do you guys think of this big guy?

 

[AMDTrucking]

Fast Tech is beginning to sell the biggest mod in the World:

 

[sedge]

What do you guys think of this big guy?

Its set up for dual coils but Where would you put the coils in relation to the single air hole

 

[TheKiwi]

What do you guys think of this big guy?

Lol pretty sure the designers fugged it up.

Tried to copy the Orchid's design, except they forgot to change the airflow.

The only way I can see it working well is if you use the post holes to build the typical double barrel coils above the air hole kinda like this

Burping out loud using Tapatalk

 

[Tbev]

Actually looks clean nice insulator but I'd have to hold it in my hand and see for sure. I'd maybe plug the air hole at the top and cross drill it right in between the two +wire holes to get the flow lower and out the side.... How it sits I'd take a shot at the dual /\ vert setup, long tails and a big step from the deck all the way to the top of verts tho, angle will lower it a bit... I'm not impressed.....

 

[I34z1k]

Back onto the Fogger, does anyone know of an international retailer that sells good versions? The ebay seller mentioned earlier charges $25 to ship down to South Africa, and I don't really trust Fasttech's version.

 

[Tbev]

Anyone have more information on the fastest version, I have a v2 that's authentic and flawless from fasttech. If it's the Yiloong grab it, I think..... Anyone.?

 

[I34z1k]

finally a listing for the 4.1: FastTech Forums

Seems un-legit. Thanks AMDTrucker

 

[porkchop_express]

I got to agree, the 2 4.1's I got I can't fault, they came clean (still cleaned though) no faults I can find on them, much better than the kayfuns I got, the only thing that sticks out to me as cheap, is that really thin glass tank, I'm so nervous that thing will break if breathe on it.

I'm with you on the thin glass, it was the first negative thing I noticed. Second was the chipped finish on the base of the unit. Not too worried about that, other than keeping an eye out for rust. The glass worries me though.