I actually like that. Less stuff to screw up. I mean down!
Anyone knows where to get this in Europe? Is this going to be exclusive to eciggiddy because they don't ship internationally.
Fogger V4!!
- Thread starter Shofixti
- Start date
- th_trl_thread_readers 0
- Status
I actually like that. Less stuff to screw up. I mean down!
Anyone knows where to get this in Europe? Is this going to be exclusive to eciggiddy because they don't ship internationally.
I really like the raised air holes! They might make up for the one piece chimney.
I'm afraid it is only from Eciggity, it even has their name stamped on the device. But I will gladly forward-mail it to you.
Mine is arriving in 3 days.
Thank you but I'll hold off for now. My vape budget is way overblown lol. Possibly the 22nd of december might be my break even!
Yeah I know, dream on
Yeah I know, dream on
Me too. That said, I picked up an Orchid the other day, because I had to use my points or loose them. Yon know, that one piece chimney is not a big deal at all.
But the capacity? I'm quoting your own phrase :"Not going to get me out of my driveway"
Yes, I quoted a picture...I just love those Vapor Flasks
btw AMD, that tread plate is looking a little rough! maybe you could take a little time off from your vaping gear and polish up that rig a little
Yes, I quoted a picture...I just love those Vapor Flasks
btw AMD, that tread plate is looking a little rough! maybe you could take a little time off from your vaping gear and polish up that rig a little
Who gives the "S" about the truck, when my beloved Vapor Flask starting to go crazy on me:
Well that sucks...I guess I'll hold off a little longer until they get the bugs worked out.
I got my Mini Fogger today and it's cute as fug!!....and it looks totally cool on top of my iStick
It took a massive amount of work to get enough air flow to make it usable, but it vapes really well at 20ish watts now. It only had a 1.5mm air hole up through the middle when I received it, and there's was absolutely no way to increase the size of that hole, so I added another 1.5mm hole under the positive post block, trimmed the insulator, added another horizontal hole to tie in the new vertical hole, and drastically champhered the inside of the AFC ring. All that doesn't really sound like much until you consider how small this damn thing is: the build deck is only about 8.5mm!!! (the whole thing is only 16.5mm)
I'll try to post some pix up tomorrow if I get time.
It took a massive amount of work to get enough air flow to make it usable, but it vapes really well at 20ish watts now. It only had a 1.5mm air hole up through the middle when I received it, and there's was absolutely no way to increase the size of that hole, so I added another 1.5mm hole under the positive post block, trimmed the insulator, added another horizontal hole to tie in the new vertical hole, and drastically champhered the inside of the AFC ring. All that doesn't really sound like much until you consider how small this damn thing is: the build deck is only about 8.5mm!!! (the whole thing is only 16.5mm)
I'll try to post some pix up tomorrow if I get time.
The tiny chamber on the Mini Fogger makes for some really great flavor (maybe the best flavor ever), but there's just not enough air flow to support higher wattage. My lungs tend to get lazy, so I turned the power down to avoid burnt hits, and it's performing really well like that. I'm going to try increasing the size of my new air holes to see if I can make it perform more like my bigger tanks, but honestly, I don't see much use for this little thing other than the rare occasion you might wear a suit (weddings and funerals for me, LOL)
For lower power vaping I would say this is a great little tank, especially if you're a mouth to lung vaper. I won't be buying another one, but I guarantee this one will remain full of my favorite juice and in working order at all times. The form factor and flavor of this tank has permanently retired my heavily modified PT mini.
For lower power vaping I would say this is a great little tank, especially if you're a mouth to lung vaper. I won't be buying another one, but I guarantee this one will remain full of my favorite juice and in working order at all times. The form factor and flavor of this tank has permanently retired my heavily modified PT mini.
Last edited:
Wow, it would fit almost perfectly! the only thing that would stick out would be the drip tip.
Off Topic:
I've received my Erlkonigin clone from FastTech. It is a great little RTA, but does it have to sound Darth Vader when I take a vape?
Also, the FastTech Squape R[eloaded] was a complete piece of poo-poo until I had my way with it:
It conducted everywhere where it should not. And NOT conducting where it should. That Emetal coating is a joke unless it is inside the threads, then it insulates all right. I chased those threads with my Taps to get that Emetal (or whatever it was) out of it.
Long story - short, I decided to re-design the whole thing, treating it as it was made out of conducting material.
First I took care of the 510 connector by drilling it dipper and installing a Delrin Cup to hold the Positive pin. Then I made two new posts a lot thinner then the original were and put Delrin tubes (insulators) over them. My Post screws are now M1.6mm like Kayfun. I also made a Delrin insulator and put it underneath the Positive disk.
No way in hell it is going to short now, it just can't.
NI200 / Rayon build for DNA-40. Build is above the deck because I don't trust that Emetal coating.
I've received my Erlkonigin clone from FastTech. It is a great little RTA, but does it have to sound Darth Vader when I take a vape?
Also, the FastTech Squape R[eloaded] was a complete piece of poo-poo until I had my way with it:
It conducted everywhere where it should not. And NOT conducting where it should. That Emetal coating is a joke unless it is inside the threads, then it insulates all right. I chased those threads with my Taps to get that Emetal (or whatever it was) out of it.
Long story - short, I decided to re-design the whole thing, treating it as it was made out of conducting material.
First I took care of the 510 connector by drilling it dipper and installing a Delrin Cup to hold the Positive pin. Then I made two new posts a lot thinner then the original were and put Delrin tubes (insulators) over them. My Post screws are now M1.6mm like Kayfun. I also made a Delrin insulator and put it underneath the Positive disk.
No way in hell it is going to short now, it just can't.
NI200 / Rayon build for DNA-40. Build is above the deck because I don't trust that Emetal coating.
I told myself I wouldn't do a clone of that one until I heard from you...glad I listened to myself!
I'm back folks. So what's the verdict from the pros here on V4.4 vs V5? And all the hype about the Orchids? Is the fogger still the RTA to go for?
I told myself I wouldn't do a clone of that one until I heard from you...glad I listened to myself!
I hear you. Very glad to be of help.
Pallas clone Rose V2 (my second one) is great out of the box though.
My best (by far) performing NI200 build on it:
Rose V2 with vertical 28 Gauge spaced NI200 coil over M3.0 special screw that I made and Rayon wick:
I'm procrastinating building one of my Foggers with dual 32 Gauge Nickel coils. Something inside my head is telling me: "Don't do it" LOL
- Status
Similar threads
- Locked
