- Status
Actaully those are just for reference.....Im working on a hotdog flavored e-liquid...
Why not, They got flavors for just about everything else, lol
I know there's pizza flavored juice, there's gotta be hotdog flavored out there already.
Sent from my iPod touch using Tapatalk
Sent from my iPod touch using Tapatalk
This morning I went to the only remaining real hardware store in town to get some replacment screws for my Smoketch Atty. I wanted to get screws with a flat bottom on the head in lieu of the pan-head ones provided. The store did not have metric sizes in stainless steel, so I got zinc plated steel 2 mm screws.
My recollection from some time back is that when 'welding' galvinized (zinc plating) materials, a toxic gas is given off. Do y'all think this is a concern in the case of using in an atty?
My recollection from some time back is that when 'welding' galvinized (zinc plating) materials, a toxic gas is given off. Do y'all think this is a concern in the case of using in an atty?
I was looking for some info on this earlier then got sidetracked
I don't think galvanized screws should be a problem; but you may want to look further into it yourself, Cool.
Wikipedia:
Cool, not sure if you live near a hobby store (one that specializes in R/C products like planes and such), but if so, give it a try... I know that small stainless steel screws are used in many applications in R/C.
Woohoo. Rewicked with cotton. My original idea was not to unwrap the cool...had to. I think I wrapped it back correctly since the provari still reads it at 2.0. The hardest part was threading three strands through the wick holes. 
Ok...a little DIY strawberry cheesecake. It hits pretty harsh at 3.6 I have read so much I can't remember what parts need breaking in on what mods. Will it get better?
How often do I rewick and recoil?
How often do I rewick and recoil?
I had a battery expolde on me today. I posted about it in the battery issue thread. I'm OK, lol
Bucky! Nothin' like that first vape off your first mod, huh?
Sent from my iPod touch using Tapatalk
I think Ive finally poped the coil on my ss wick so Im going to cvs after work and get some of the cotton you posted a link to and set my tank up with it...well ya know,its there...just gotta try it ...
wonder if it will set up str8 like the ss wick out of the single hole?
I think Ive finally poped the coil on my ss wick so Im going to cvs after work and get some of the cotton you posted a link to and set my tank up with it...well ya know,its there...just gotta try it ...
I did that a couple of times. Once with it actually sticking up like a SS wick - it worked fine. The other time the coil/wick was horizontal (sorta like the original setup but with only one 'leg' going into the tank), this setup kept flooding the upper chamber; I had to blow juice out of the air tube a few times that day. I've been doing the factory setup with a cotton wick since that. Still can't believe how much juice I'm going through with this setup
I did that a couple of times. Once with it actually sticking up like a SS wick - it worked fine. The other time the coil/wick was horizontal (sorta like the original setup but with only one 'leg' going into the tank), this setup kept flooding the upper chamber; I had to blow juice out of the air tube a few times that day. I've been doing the factory setup with a cotton wick since that. Still can't believe how much juice I'm going through with this setup
with the factory setup, are you dealing with the stock screws or did u replace them? i have a heck of a time with them,lol
Haven't replaced the screws ... yet. I know whatcha mean. Gotta look for some screws soon.
The Chinese Phoenix knockoff has a nice setup. A hole through the post, you stick the end of your coil through the hole, screw down the screw, it's held.
The Chinese Phoenix knockoff has a nice setup. A hole through the post, you stick the end of your coil through the hole, screw down the screw, it's held.
Ugh, those darn screws....lol.
I bought one of the vivi rebuilds, I had $19 worth of fun. I did several different style wick setups, everything was good.
I eventually got mad at those screws and then I had fun with the hammer.
The drip tip that comes with this is very big and gaudy. Probably not something I would use as the bulb part is 5/8" in size.
They also have to much air flow. I plugged the original hole and drilled a small hole in the tank by the coil...the upper chamber is still to large for me to like this device.
Anyways, like I said, I had a $19 fun day and I'm over it.
I bought one of the vivi rebuilds, I had $19 worth of fun. I did several different style wick setups, everything was good.
I eventually got mad at those screws and then I had fun with the hammer.
The drip tip that comes with this is very big and gaudy. Probably not something I would use as the bulb part is 5/8" in size.
They also have to much air flow. I plugged the original hole and drilled a small hole in the tank by the coil...the upper chamber is still to large for me to like this device.
Anyways, like I said, I had a $19 fun day and I'm over it.
LOL! Any pieces left that may be salvageable? I'll take 'em.
The Hammer probably took care of those, lol Should have melted it down for a ring for the Wifey, lol
You could try sanding the zinc off of the heads of those with an emery board or some wet & dry & then sit them in a class of coke for 5-10minutes , which will remove most of the remaining zinc. The zinc on the threads shouldn't be an issue, since they will be encased in the screw hole metal. The main one to worry about is the positive post, since it is sitting up in free air & will get hotter than the neg post, which has a nice alum heat sink all round it.
- Status
Similar threads
- Locked
