G-Tank-US-CO-OP Support Thread
- Thread starter Scubabatdan
- Start date
- th_trl_thread_readers 0
- Status
I think I like this scroll work better...
Dan
Love the scroll... If you ever make them put me down for 2
SMABob
Hey I only had 5/8OD x 1/2ID pyrex on hand, so it kinda determined my foot print. I have some 1/4" I just found I may try a smaller version at 3ml.
Dan
Update:
Ok got an email for emachineshop today, here it is:
Hi Daniel,
The parts have been sent to our partner supplier for rework (or remake if warranted).
I expect to receive a status update next week.
I will inform you with any update I receive.
Best Regards,
Alex Dimitrovski
eMachineShop
201-962-7511 ext.115
>
> Good morning Alex, my weekly check on progress (week 2)
> Any word on a time frame for completion.
> Thanks
> Dan
More to follow.
Dan
Ok got an email for emachineshop today, here it is:
Hi Daniel,
The parts have been sent to our partner supplier for rework (or remake if warranted).
I expect to receive a status update next week.
I will inform you with any update I receive.
Best Regards,
Alex Dimitrovski
eMachineShop
201-962-7511 ext.115
>
> Good morning Alex, my weekly check on progress (week 2)
> Any word on a time frame for completion.
> Thanks
> Dan
More to follow.
Dan
Happens to me all the time. Thanks for the update. Have a great weekend.
Since we're waiting anyway, nudge them to remake the tops without threads tapped the whole length of the interior. Then, those of us that had to wait, can send neener neeners to the 22 that got theirs already.
I'm confused,does the above statement mean that you sent the parts back to emachine last week for repairs and now they are sending them somewhere else for the repairs?
Since we're waiting anyway, nudge them to remake the tops without threads tapped the whole length of the interior. Then, those of us that had to wait, can send neener neeners to the 22 that got theirs already.
I believe they are chasing the threads and not remaking them, had I been aware of the problem when I sent them in I would have included that. I will have to see what they do.
Dan
I sent them back 2 weeks ago, and they are at their supplier (partner). Extended service branch? IDK.
Dan
McMaster carr item number 8491A822
This has interesting posabilities for a top cap for the Ghost. Cut down to size and warmed up and pressed in.
Or
PT # 8492A213
The hole for the drip tip may be a little sloppy with this one however.
This has interesting posabilities for a top cap for the Ghost. Cut down to size and warmed up and pressed in.
| Type | Press-Fit Drill Bushings |
| Material | Steel |
| Steel Material Type | Case-Hardened Steel |
| Letter Drill Size | R (.3390") |
| System of Measurement | Inch |
| Inside Diameter | .339" |
| Inside Diameter Tolerance | +.0001" to +.0005" |
| Outside Diameter | 5/8" |
| Outside Diameter Tolerance | +.0014" to +.0017" |
| Length | 3/4" |
| Length Tolerance | ±.015" |
| Rockwell Hardness | C61-C65 |
| Specifications Met | American National Standards Institute (ANSI) |
Or
PT # 8492A213
The hole for the drip tip may be a little sloppy with this one however.
| Type | Press-Fit Drill Bushings with Head |
| Material | Steel |
| Steel Material Type | Case-Hardened Steel |
| Fractional Drill Size | 11/32" (.3438") |
| System of Measurement | Inch |
| Inside Diameter | .3438" |
| Inside Diameter Tolerance | +.0001" to +.0005" |
| Outside Diameter | 5/8" |
| Outside Diameter Tolerance | +.0014" to +.0017" |
| Length | 1/4" |
| Length Tolerance | ±.015" |
| Head Diameter | 51/64" |
| Head Thickness | 7/32" |
| Rockwell Hardness | C61-C65 |
| Specifications Met | American National Standards Institute (ANSI) |
Wow,these guys are sounding like my old auto repair shop.My hat's off to to you for dealing with these guys in a better manner than I would.
Anyone know if these are type B TGO mouthpieces/cartridges?
Tank for TGo (Mouthpiece)
Tank for TGo (Mouthpiece)
- Status
Similar threads
