This thread is for the general discussion of the Product GeekVape Blitzen. Please add to the discussion here.
Hi, not sure if right place!
I scored one of these from the local vape shop the other day, and first of all this tank provides a 'Mean Vape'....literally, love the vaping I get from it.
But seriously, am I missing something with the taking it apart and putting it back together again? I couldn't find any youtube vids that clearly showed why bits keep turning and nothing locks, in the end I managed to use a pocket knife to lock bits together and got it back together.
Scared of re-wicking to come.....
Any help please!
As I said, there is an awesome vape session to be had with this tank, tops!, but the hardest I've ever had to take apart and put back together.
Thanks!
Is the Zeus Dual easy to build and put back together? I have the 25RTA which I really like and am looking for an upgrade.I played hell getting the tank tabs into the deck slots. Otherwise it wasn’t too bad. I like how it vapes, I’m not getting any leaking, only a little condensation from the air holes.
I like the bubble tank, but I’d prefer top air like the Zeus dual. They both vape very nicely, look great, but I’m not a fan of the matte finish on either. ( I have both in gunmetal)
Does anyone know if the black is matte as well?
Is the Zeus Dual easy to build and put back together? I have the 25RTA which I really like and am looking for an upgrade.
Give me to Friday. Of course that's US customs saying that so that could be any Friday the 13, whenever they feel like it, it's been sitting their since Sunday.Is the Zeus Dual easy to build and put back together? I have the 25RTA which I really like and am looking for an upgrade.
@DeloresRose Thanks. I looked at the fancier. I very much like a larger capacity so I am going to try the bubble glass with the Zeus and see how it works. Love the no leaking. I am sure I will be particular about lining it up, too. Thanks again.
Definitely interested to hear. I have 2 packages one sitting in LA and one in San Fran. Seems a bit longer than usual.Give me to Friday. Of course that's US customs saying that so that could be any Friday the 13, whenever they feel like it, it's been sitting their since Sunday.
The no leaking of Themis got me to get a Zeus.
Give me to Friday. Of course that's US customs saying that so that could be any Friday the 13, whenever they feel like it, it's been sitting their since Sunday.
The no leaking of Themis got me to get a Zeus.
Interested to hear how they compare.
Mostly that would affect flavor, I’d imagine, which has so many variables, and also is subjective. I’m interested in how easy to assemble, and how airy.My Themi are mesh and I haven't ever got around to trying one with a regular coil yet. So the comparison won't be too exact.
Hi, not sure if right place!
I scored one of these from the local vape shop the other day, and first of all this tank provides a 'Mean Vape'....literally, love the vaping I get from it.
But seriously, am I missing something with the taking it apart and putting it back together again? I couldn't find any youtube vids that clearly showed why bits keep turning and nothing locks, in the end I managed to use a pocket knife to lock bits together and got it back together.
Scared of re-wicking to come.....
Any help please!
As I said, there is an awesome vape session to be had with this tank, tops!, but the hardest I've ever had to take apart and put back together.
Thanks!
I played hell getting the tank tabs into the deck slots. Otherwise it wasn’t too bad. I like how it vapes, I’m not getting any leaking, only a little condensation from the air holes.
I like the bubble tank, but I’d prefer top air like the Zeus dual. They both vape very nicely, look great, but I’m not a fan of the matte finish on either. ( I have both in gunmetal)
Does anyone know if the black is matte as well?
Is the Zeus Dual easy to build and put back together? I have the 25RTA which I really like and am looking for an upgrade.
Mostly that would affect flavor, I’d imagine, which has so many variables, and also is subjective. I’m interested in how easy to assemble, and how airy.
Thanks. I have not been very adventurous with tanks and have been mainly using the toptank with rba. I have an older SMOK TFV4 that I do not use and I have the Geekvape 25 RTA which I really like because of the flavor, RTA and the amount it holds.Compared to the Themis mesh Zeus dual was easier to put back together, although neither is bad and both similar, Zeus's deck part of the base and not snapping in in a specific direction makes it slightly easier (now I want to take it apart, I didn't pay attention how the air flows through or o-rings which is where I've had a problem putting Themis back together once). I did a single coil, I had a choice of higher ohms or wider spacing to fit across the deck. Wicking a single was easy but it's similar to the Themis mesh so I've had practice with harder (there's a lot more wick to not put in the hole on Themis), the feeding concept I used of less is more is the same. I don't know if that's needed on Zeus but I heard it is.
Zeus is airier than the Themis. I have them both closed up for flavor and Zeus doesn't whistle as bad as Themis.
Thanks. I have not been very adventurous with tanks and have been mainly using the toptank with rba. I have an older SMOK TFV4 that I do not use and I have the Geekvape 25 RTA which I really like because of the flavor, RTA and the amount it holds.
I decided that I want another RTA with a decent capacity - at least 5. Ideally 7-ish.
My building experience has been on the Kanger rba which was super easy and the 25 RTA is easy too - velocity style
So the info is super helpful - thanks
After I find a tank I really like then I want to try a DNA box.
Compared to the Themis mesh Zeus dual was easier to put back together, although neither is bad and both similar, Zeus's deck part of the base and not snapping in in a specific direction makes it slightly easier (now I want to take it apart, I didn't pay attention how the air flows through or o-rings which is where I've had a problem putting Themis back together once). I did a single coil, I had a choice of higher ohms or wider spacing to fit across the deck. Wicking a single was easy but it's similar to the Themis mesh so I've had practice with harder (there's a lot more wick to not put in the hole on Themis), the feeding concept I used of less is more is the same. I don't know if that's needed on Zeus but I heard it is.
Zeus is airier than the Themis. I have them both closed up for flavor and Zeus doesn't whistle as bad as Themis.
Thanks! Themis is probably less airy than I’d like, but I may try it anyway just to see. I use the Zeus wide open. Ain’t no air too big for me lol. I build them dual, because why not. Also a big Geek fan. I’d like to have spares of all of them eventually.