If you haven't already you could check out Rawveg's tutorial on vapourtrails.tv. Starts at 28:30. Worth a try.
The Potting Shed
The Potting Shed
Genesis Line - mini genesis
- Thread starter shpaolin
- Start date
- th_trl_thread_readers 0
- Status
I have a Line on my Provari 3.1 ohms 4.5 volys working good
Another on a VV Tube (Lava) 1.9 ohms 3.9 volts working good
The coil will settle down as it gunks up a little
juice in the coil chamber was me tooting to hard so I drilled the air hole a little bigger and lightened my draw as well
So I have one with original hole and one with larger hole and both work fine
Just my 2 cents
Another on a VV Tube (Lava) 1.9 ohms 3.9 volts working good
The coil will settle down as it gunks up a little
juice in the coil chamber was me tooting to hard so I drilled the air hole a little bigger and lightened my draw as well
So I have one with original hole and one with larger hole and both work fine
Just my 2 cents
Last five are going out today. Next round will start sometime next week.
I am waiting for Van to tell me more details.
And one more time , thank you Dan for great tutorial.
I am waiting for Van to tell me more details.
And one more time , thank you Dan for great tutorial.
The last five Lines? Or the last five packages including mini, maxi and Line?
Line No. 075 arrived in Germany today. Thanks gredie, that you ordered on for me too.
The setup was easy. I watched the video on vapourtrails.tv and noticed some tips here and from gredie. I use 3 wraps of the coil, that's what is perfect with my GGSlim. Thanks Van for this great device. That is what I was looking for my GGSlim. Perfect
The setup was easy. I watched the video on vapourtrails.tv and noticed some tips here and from gredie. I use 3 wraps of the coil, that's what is perfect with my GGSlim. Thanks Van for this great device. That is what I was looking for my GGSlim. Perfect
Tried following RawVeg's setup to a tee.... not too bad for first time complete setup.
Metered 1.7 on my Provari, and at 3.7v I am recovering from a nic induced cold sweat; not kidding and that = good.
After an hour, it's gone up to 1.9 Ohms... will see what happens.
Got to say with Tim's setup it vapes much much better than my first attempts.
Metered 1.7 on my Provari, and at 3.7v I am recovering from a nic induced cold sweat; not kidding and that = good.
After an hour, it's gone up to 1.9 Ohms... will see what happens.
Got to say with Tim's setup it vapes much much better than my first attempts.
Mine started leaking today. Will pull apart, found some posts that might fit in the small area after I turn em down of course. Since it will be pulled apart might as well add screw terminals. Stay tuned lol will use dans guide. After this is done I won't have coil probs anymore.
I have to ask you if you do not know what you are doing please send it back
for repair. You will have no warranty if you drill holes and try to disassemble it. Or make any kind of
modifications.
That is 6th Line that leaks. I thought that there will be around 15-20 , becouse we
did not find out about this problem untill first 60 where shipped.
It is souch a small peace of powder in the place where plexi goes that you cant even see it.
Urquidezj and Dan know what they doing , but if you have a problem with the Line and you are
not sure about what you are doing please send it back and Van will fix it for you.
for repair. You will have no warranty if you drill holes and try to disassemble it. Or make any kind of
modifications.
That is 6th Line that leaks. I thought that there will be around 15-20 , becouse we
did not find out about this problem untill first 60 where shipped.
It is souch a small peace of powder in the place where plexi goes that you cant even see it.
Urquidezj and Dan know what they doing , but if you have a problem with the Line and you are
not sure about what you are doing please send it back and Van will fix it for you.
I would be unable to take it apart and put back together - even if my life depended on it.
Honestly, i wouldn't be afraid to take the Line apart, but I'm not sure if I can it put together again to get it working LOL.
Hey, great day.
i went to ECI and can't access to Line Stuff Forum, What's going on?
Cheers all.
i went to ECI and can't access to Line Stuff Forum, What's going on?
Cheers all.
I think they're making a kind of reorganizing the structure at ec.i The Line stuff section seems to be not a restricted area any longer.
Update:
After testing it laying on it side full for 2 hours, no leaks.
After riding around in my wifes purse all day, no leaks.
Think it is good to go.
Dan
After testing it laying on it side full for 2 hours, no leaks.
After riding around in my wifes purse all day, no leaks.
Think it is good to go.
Dan
- Status
Similar threads
