Genesis Line - mini genesis

[gredie]

Got my activation mail from the wall. Thank you, Del!

 

[alvinosj]

My Line has a metal taste, does anybody knows how to rectify this issue??

i used a normal orange flame lighter to burn the mesh... i couldn't find my windproof lighter anywhere

my flavors are horehound + menthol

 

[eyebrook]

Did you wash the Line first? always works for me I wash everything with washing up liquid when it arrives just in case

 

[alvinosj]

hmmmmm i didnt wash it -_-

if i wash the tank, then how do i draw the water out???

 

[eyebrook]

with a syringe its quite easy

 

[raceengine]

registered and waiting for activation code...

 

[shpaolin]

If you do not get in contact me please.

 

[Briachas]

What was the final cost per line in the last co-op?

 

[alvinosj]

i still cant get rid of the burnt taste..
could it be my liquid are too watery?

 

[kandarv]

Waiting for confirmation...

 

[eyebrook]

i still cant get rid of the burnt taste..
could it be my liquid are too watery?

If you fire your coil with the top off does the coil glow red anywhere if it does move the coil a little with a toothpick or paper clip, jusr move the wrap that is glowing and only a little
And check what ohms your coil is as well, hope this helps

 

[alvinosj]

the kanthal thats connected to the shorter pin is always glowing, no matter how many wraps i go -_-

 

[urquidezj]

Make sure u r as close as you can to the wick without touching the coil. I just keep it presses and drop juice on it till it stops. Seems to work for me.

 

[eyebrook]

the kanthal thats connected to the shorter pin is always glowing, no matter how many wraps i go -_-

Make sure the bottom coil is not touching the base and plenty of juice as urq says

 

[alvinosj]

so i should make the kanthal tight and firm, but not touching the mesh??

 

[alvinosj]

currently, when i coil it around the mesh, i make sure it touches it and tight as possible -_-

 

[shpaolin]

Ok , new batch of Lines started. Go here and put your name on the list: www.vaporwall.com • Index page
I can't answer all the emails so here's the link.

 

[eyebrook]

yes wrap it round the mesh so it touches the mesh
Make sure the coils do not touch each other
make sure you have the mesh finishing above the last wrap
Here is a pic of (Stefanos coil I think, but dont kill me if Im wrong guys )

 

[ukeman]

ah that is one beautiful wrap job!
it takes a few practices to get it that nice... wow.
after doing a few you will realize this... hehehh

at least it shows that it can be done!

yes wrap it round the mesh so it touches the mesh
Make sure the coils do not touch each other
make sure you have the mesh finishing above the last wrap
Here is a pic of (Stefanos coil I think, but dont kill me if Im wrong guys )

View attachment 66906

 

[Stefano]

yes wrap it round the mesh so it touches the mesh
Make sure the coils do not touch each other
make sure you have the mesh finishing above the last wrap
Here is a pic of (Stefanos coil I think, but dont kill me if Im wrong guys )

View attachment 66906

NP eyebrook