Genesis Line
- Thread starter shpaolin
- Start date
- th_trl_thread_readers 0
- Status
They cost about half what people are asking on the classifieds
Sent from my ADR6400L using Tapatalk 2
Sent from my ADR6400L using Tapatalk 2
You are both in. Line is 80$. What people are doing here with them , that is ECF
buisnes. They are making more money on this atty than people who made them.
But that is on ECF to take care of that.
buisnes. They are making more money on this atty than people who made them.
But that is on ECF to take care of that.
I'm still having trouble signing in.. It says that my username is inactive. The only reason why I was inactive is because I was unable to sign in! @__@;; So confused.
Thank you very much,,ive just came back from work,,open my email and finally something to make me smile,,my acc was activated..Thanks again.
63,00 EUR + 15 EUR for shipping, +2.50 EUR fees = ~$106 USD. People are selling them for around $200 in the classifieds. It's a shame, but if someone else is willing to pay for it, I don't see a problem.
Honestly, I think Del / Van need to increase the price, and take a deposit next time. I'm willing to support them, and if the creators are having a problem with not getting enough money, I'm OK with paying more to help them.
Honestly, I think Del / Van need to increase the price, and take a deposit next time. I'm willing to support them, and if the creators are having a problem with not getting enough money, I'm OK with paying more to help them.
I'm not even sure I'll get one(page 17 on the list)and I would be glad to give a little more to the makers too(if I get one).I paid way too much for a second hand VV ali'i about a year ago and it was nobodies fault but mine
Never again for anything vape related.If people wouldn't pay these big prices,sellers might become more reasonable.But,then again,I've never bought a hard to get item to turn a quick buck off somebody else either.
I'm not even sure I'll get one(page 17 on the list)and I would be glad to give a little more to the makers too(if I get one).I paid way too much for a second hand VV ali'i about a year ago and it was nobodies fault but mine
Never again for anything vape related.If people wouldn't pay these big prices,sellers might become more reasonable.But,then again,I've never bought a hard to get item to turn a quick buck off somebody else either.
Problem is I see many that do buy hard to get stuff just to flip it. With ecf rules they favor this type of thing. Only forum classifieds I have ever seen run this way........
I would want one but being on another list is what kills it for me. Then knowing how much people mark them up in the CL kills it as well. Here is the problem with the list. I have the money now but by the time I came up on the list would I have the money then? Would I have bought something else im on the list for from someplace else? So I guess I will have to pass on this. Thanks everyone for all the help.
VaporVall.com. We do not really care about who makes money from reselling
our attys. I feel sorry that people have to buy it at that price , but we can not make as
many as we would like. We have a option to sell it to few webshops that asked allready ,
and they are willing to pay what we ask for them , but than again price would go up.
And point of this device is to get people to start using genesis , becouse we feel that it
is the best system in the vaping world , and keeping the price down will make more people
decide to try it. It is to bad that we can not make more , but we do our best.
Day jobs are slowing us down.
our attys. I feel sorry that people have to buy it at that price , but we can not make as
many as we would like. We have a option to sell it to few webshops that asked allready ,
and they are willing to pay what we ask for them , but than again price would go up.
And point of this device is to get people to start using genesis , becouse we feel that it
is the best system in the vaping world , and keeping the price down will make more people
decide to try it. It is to bad that we can not make more , but we do our best.
Day jobs are slowing us down.
Personally I have seen some exorbitant prices on Line(s), Minis, Maxis, and STURM MODS on the classifieds here. Same thing for another SS mod and tanks that aren't from Vaporwall. If people are not willing to wait it out, and they are willing to pay that kind of price... well so be it. I paid a high price (though the typical going rate at the time) for an ODY in the past, but I knew 100% what it cost from a re-seller, and what I was getting, and it has not been avail again since (even though it was promised). What I find a problem is that some of these buyers do not know what they are getting in to, and due to their impatience (and fat wallets) will pay for it regardless AND mostly what bothers me is there are people that get on these lists, or make purchases just so they can resale them and turn profits like this.
I have a Line v1 (bought off the classifieds BTW back before the Line became such a huge wanted rebuildable - Thanks Lexi) and a Line V2. I have thought of selling my V1, but refrain because I like having a backup Line, like having one setup for VG and the other for PG/Vg. And in all honesty because I do not want to ask that much for it, and would rather PICK whom I pass it on to. I won't sell my SM... But when I saw that SM/Line combo go for what it did in these classifieds... I had to do a double take.
Del, just keep doing what you guys are doing and it will eventually even itself out. I do think that price you/Van get is fair, and the price others are asking is only for those not willing to be patient.
Thanks to Van for building a great genisis atomizer and to you for the patience dealing with the demands and people!!!
I have a Line v1 (bought off the classifieds BTW back before the Line became such a huge wanted rebuildable - Thanks Lexi) and a Line V2. I have thought of selling my V1, but refrain because I like having a backup Line, like having one setup for VG and the other for PG/Vg. And in all honesty because I do not want to ask that much for it, and would rather PICK whom I pass it on to. I won't sell my SM... But when I saw that SM/Line combo go for what it did in these classifieds... I had to do a double take.
Del, just keep doing what you guys are doing and it will eventually even itself out. I do think that price you/Van get is fair, and the price others are asking is only for those not willing to be patient.
Thanks to Van for building a great genisis atomizer and to you for the patience dealing with the demands and people!!!
Well said. I bought a Iatty for $200. Then found the Z thread. I vaped less then a tank and put the Iatty back where I found it. Took less then 8 minutes for that $200 to hit my pay pal account. I didn't mind paying that much just to say I tried one. I took it with me on a 9 hour trip to a vape meet and won a contest for the most heavy mod (on a provari) then came home and listed it. By the way it won me a DCCT. It just sits around lol. Nice looking tank though.
So it looks like the thread that you request the Line v2 is closed. So does that mean you are SOL at this point?
There will be some extras i hope.
He is making them by him self now , turner just makes bodies on CNC , so there should be no problems. Last 500 will be delivered this month ,
and we will wait for response from the users. If everything is ok he will make 500 more.
Hi all, I'm waiting on a maxi i got on the classifieds (my next genesis will be from the wall). But as i wait to get back home, i want to order Kanthal and Super Fine 400 Mesh. I though someone here could give me some tips on the best places to order from, I'm in the states if that helps narrow it down . I've found one post/link from the ecf here Resistance heating wire Kanthal A 32 awg 75 ft thoughts on that Kanthal?
. I've found one post/link from the ecf here Resistance heating wire Kanthal A 32 awg 75 ft thoughts on that Kanthal?
That's a great vendor - they will get it right out to you. 32ga appears to preferred by most.
Corrosion-Resistant 304 SS Woven Wire Cloth 400 X 400 Mesh, .001" Wire Dia, 12" X 12" Sheet #85385T885 works great for me. McMaster-Carr does tend to be pricey, but they are fast and dependable. There are several other vendors out there too.
Corrosion-Resistant 304 SS Woven Wire Cloth 400 X 400 Mesh, .001" Wire Dia, 12" X 12" Sheet #85385T885 works great for me. McMaster-Carr does tend to be pricey, but they are fast and dependable. There are several other vendors out there too.
Good to know that's the right kanthal, what about this Mesh
And please any other vendors or thought, don't be shy. I'm looking to learn and do things right
- Status
Similar threads
- Locked