Goblin mini leaked the tanked empty (user fault)

[Karstine]

So basically how much cotton i use i just estimate if can pull left and right when its in the coil then i align my scissors along the outer threads and cut it, then put on the bottom chimney, use a small screw driver and gently push the cotton down to the juice channels. Not sure if im doing it right or wrong but after trying this method instead of just agah agah last time , it significantly reduced the amount of spitting and leaking. But the thing is that the flavour is not so strong.

The only thing we can do is experiment haha

 

[Ninthsine]

The only thing we can do is experiment haha

Ya loh, bo bian liao. Also it serves as a training to be wicking pros hahaha! Although mine is still leaking just a bit and really seldom spitting. Hopefully can see some improvements the next time i wick

 

[Karstine]

Ya loh, bo bian liao. Also it serves as a training to be wicking pros hahaha! Although mine is still leaking just a bit and really seldom spitting. Hopefully can see some improvements the next time i wick

What to do? This one not ferrari (tuned by factory) this one is like playing with lancers and sti, everything tune ourselves

 

[Ninthsine]

Hahaha like your reference tho. Ya lo, but actually i quite like the idea of building my own rba. Gives me like a sense of accomplishment and it kills a lot of my free time where i have nothing to do also

 

[Karstine]

Hahaha like your reference tho. Ya lo, but actually i quite like the idea of building my own rba. Gives me like a sense of accomplishment and it kills a lot of my free time where i have nothing to do also

Haha agreed, much better than rolling own cig or what. This makes vaping feels like a hobby instead of an addiction! Great minds think alike lah Bro

 

[Epic_Sinner]

I usually juice up my cotton and start trimming from there, placing them nicely in the juice wells, trimming them nicely along the posts. When I cap down the barrel it should not have too much restrictions and should fit nicely without having to adjust the cotton in the juice wells. From there I just adjust it further after I cap it down to stuff the cotton a little more If I have to so my cotton looks like a straight line across the coil from top view.

 

[Karstine]

I usually juice up my cotton and start trimming from there, placing them nicely in the juice wells, trimming them nicely along the posts. When I cap down the barrel it should not have too much restrictions and should fit nicely without having to adjust the cotton in the juice wells. From there I just adjust it further after I cap it down to stuff the cotton a little more If I have to so my cotton looks like a straight line across the coil from top view.

Especially since goblin mini deck quite small

 

[Ninthsine]

Haha agreed, much better than rolling own cig or what. This me vaping feels like a hobby instead of an addiction! Great minds think alike lah Bro

Yup yup. Tho i still smoke normal cigarettes when im out bcos of precautions hahah

 

[sibehsteamsiah]

Does this tank work well in single coil mode? Mine has been sitting around since I bought it. I am too lazy to do a dual coil..I only did it once and I gave up.

if it doesn't work well with a single coil I think it will sit around...forever

 

[Karstine]

Does this tank work well in single coil mode? Mine has been sitting around since I bought it. I am too lazy to do a dual coil..I only did it once and I gave up.

if it doesn't work well with a single coil I think it will sit around...forever

Even with single coil adaptor, most review say the airflow is plenty. But do note that even with single coil adaptor, the build deck is small thus the same problem remains. Goblin is very picky for wicking technique.

 

[sibehsteamsiah]

wicking and all has been fine. but lazy to do it twice.. haha. I guess this tank will remain unused for now. Also do not like the bottom air flow as it condenses on the mod

 

[Karstine]

wicking and all has been fine. but lazy to do it twice.. haha. I guess this tank will remain unused for now. Also do not like the bottom air flow as it condenses on the mod

Haha you should try the single coil adaptor on first! Even when it's leaking (due to my bad wicking) it's still produce flavorful and huge cloud, even on 20 watts

 

[Ninthsine]

Does this tank work well in single coil mode? Mine has been sitting around since I bought it. I am too lazy to do a dual coil..I only did it once and I gave up.

if it doesn't work well with a single coil I think it will sit around...forever

Yes bro it works quite well for me in single coil. Been using single coil since i got it cus i dropped some screws hence unable to do a dual coil

 

[Darksaber]

i'm using a single coil.. really lazy to dual. good cloud and flavour.

 

[sibehsteamsiah]

I will try this weekend when I head to my parent's house up north to play with my toys. Sadly I can only play there

 

[Ninthsine]

I will try this weekend when I head to my parent's house up north to play with my toys. Sadly I can only play there

Like that youre totally safe liao

 

[Karstine]

Problem has been solved using less wick. Too much wick can choke a 2.5mm ID coil. Will keep this tread open for future cases when new blood buy the goblin/goblin mini.