GotVapes Deal of the Week through Sunday Midnight - Cyclone Variable 3 Stage eGo Dongle & 2 free cyclones- $14.95

[dannoman]

Did everyone forget this marvelous little pass through that is not only eGo compatible but is a 3-Stage Variable? We didn't and we thought it was time to bring your attention back to this unit with a great sale through midnight Sunday - ONLY $14.95 - you just can't lose at that price. It comes with a couple of Cyclone Vornado cartomizers but even if you just toss them you have a great value alone in this unique dongle.

It comes with a 38 inch long USB cord. Click the picture above to go straight to the product page.​

Enjoy!

 

[Briar]

It works really well. I am still using mine from the time it first came out, so it's well made. The three voltages pretty much cover the most useful range, IMO. It's comfortable to hold. The button is nice. Word to the wise, though: it, and any other passthrough, works best if plugged into a USB hub rather than directly into your 'puter.

I've been breaking my head, though, trying to figure out what to use for a stand for it, so that the wire doesn't get bent when I stand it up in something - don't always want to keep a carto horizontal...

Any ideas, anyone? On the cheap?

 

[dannoman]

Yes...we need to come up with a USB e-Cig stand. Its much needed....

 

[trevor148]

Needed this deal 4 days ago before i spent 2 hours rebuilding my passthrough. Re-soildered my wires, replaced the positive terminal and seal.

 

[harleydiva]

Needed this deal 4 days ago before i spent 2 hours rebuilding my passthrough. Re-soildered my wires, replaced the positive terminal and seal.

Always need a backup....right?

 

[trevor148]

that was my backup I need batteries so I can leave the house.

 

[AG51]

Did everyone forget this marvelous little pass through that is not only eGo compatible but is a 3-Stage Variable?

I dunno Danno

I don't have my new mini vivi novas or my new Stardusters with the new changeable heads on dem to try them out on its yet

 

[kellie]

Prob a dumb question But could you use this with a ac wall adapter instead of the computer?

 

[trevor148]

It is usually hard to find one that will work with a pass trough. It has something to do with volts or amps being low for standard wall usb chargers.

 

[yiddleboge6]

I use a wall adapter with my ego-c upgrade PT, no problem. You just need the right wall adapter.

 

[rdsok]

Prob a dumb question But could you use this with a ac wall adapter instead of the computer?

It is usually hard to find one that will work with a pass trough. It has something to do with volts or amps being low for standard wall usb chargers.

It actually did work with the usb charger I was using... but what trevor mentioned, I've read about numerous times so quality as well as how much output the charger has will come into play. I used the one that came with my Motorola Bionic, it has 5.1v 850mah output

 

[burns_erin]

It works really well. I am still using mine from the time it first came out, so it's well made. The three voltages pretty much cover the most useful range, IMO. It's comfortable to hold. The button is nice. Word to the wise, though: it, and any other passthrough, works best if plugged into a USB hub rather than directly into your 'puter.

I've been breaking my head, though, trying to figure out what to use for a stand for it, so that the wire doesn't get bent when I stand it up in something - don't always want to keep a carto horizontal...

Any ideas, anyone? On the cheap?

Yes...we need to come up with a USB e-Cig stand. Its much needed....

I keep looking at things like these:

Product Catalog:.Command™ Clear Round Cord Clips

Or you can always go with a piece of stick on velcro, once piece on the PV one where you want to stick it. This little dongle is light enough it should work.

Of course I am currently going low tech....a wad of kleenex

 

[Snus]

Great deal, wow! I have a 5 volt pass through that was about $10 and I love it. I just wish it was variable! Mine did not work with my wall charger, but does great plugged directly into my laptop!

 

[zippersnapper]

I use a wall adapter with my ego-c upgrade PT, no problem. You just need the right wall adapter.

Me 2.
The amp rating on the USB root hub (bus power) is questionable at best on a PC, especially if you already have a dozen usb gadgets hooked up like I do.

If using a laptop, try and charge when using the brick only, and be sure to disable the power managment feature of the USB root hub in device manager.

The safe bet, is always a wall wart of ample amps...

 

[trevor148]

so I bought one and its not working does the blinking bue light mean its doa or should use it in something else I've tried two laptops and an old usb cellphone charger all had the same problem.

Edit: Never mind it decided it likes a specific usb port on my laptop. It wont work on the other two

 

[Briar]

so I bought one and its not working does the blinking bue light mean its doa or should use it in something else I've tried two laptops and an old usb cellphone charger all had the same problem.

Edit: Never mind it decided it likes a specific usb port on my laptop. It wont work on the other two

Mine did that when I plugged directly into the 'puter. Not enough amps, I think. Apparently, on the computer, some ports provide more power than others, maybe that's why your dongle worked on that particular one.

 

[kellie]

I should have got one of these why they were on sale

 

[dannoman]

Oops...those are back up for sale until we get another weekly deal up, I never meant for that to expire, so thanks for the heads-up...

 

[kellie]

Sweet will have to get one on payday

 

[billy2boots]

anyone know the right mah output you need? don't work in the car, don't work off wall adapter, but does work off puter??