I use all vg and al long as I tilt tilt tilt I get no dry hits. If you are using the short wicks, this is even more important.
GotVapes for Dummies
- Thread starter SuperLuckyLady
- Start date
- th_trl_thread_readers 0
- Status
Obviously if you are comfortable with holding it at parrallel... that is fine but I find I don't need to tilt further than what it takes to get the juice up to the head... anything further is just a matter of preference then.
Look at the coil itself... it shouldn't be pushed down into the unit ... it should sit about level with where the wicks come into the head at.
If you've used the head for more than a tank worth already... it may be clogged and need to be cleaned and dry burned already... How fast this happens depends on how the juice itself behaves. On mine, I clean and dry burn after each tank full but many use juices that don't require it be done that often.
Nice to see that I am not the only who likes the vg on the heavy side, lol. The stardust is a good unit but I picked up three and only two worked well so I am some what iffy on those. I may try the new ones though.
Well it's easy enough to fix the nova heads if you prefer the four wick configuration. It's makes for a nice happy medium I think. Removing the nova metal sleeve cap thingy is awkward to say the least, as is putting it into the stardust pip sleeve thingy. But all in all it is well worth the extra effort. It makes the mini vivi perfect I think.
i took a pick and raised up my 510 connection seems to have worked thanks yall
OK folks, time for an update.
This old fashioned girl still swears by the stardusts, both the old school and replaceable head versions, and the vivi novas.
What else is there in the GotVapes lineup for us of little patience, fumbling fingers or just plain no interest in fiddling with stuff?
This old fashioned girl still swears by the stardusts, both the old school and replaceable head versions, and the vivi novas.
What else is there in the GotVapes lineup for us of little patience, fumbling fingers or just plain no interest in fiddling with stuff?
Like Calgons only differents 
I like all of the above and I added a Titan. Love it...it is big enough that all I have to do is vape...for hours.
I am having issues with some phoenix bc's the vacuum doesn't seem to be building enough pressure to keep the wicks wet. every few puffs I have to sit there and do several primer puffs(sucking without pressing the button) to get them wet again or I will get a very nasty dry hit. I was wondering if anyone had any idea what was causing this and how to fix it. I don't know what version these are or if they are real phoenix's. they were a gift. but any help would be appreciated. Thanks in advance
Don't forget the Vision Grande. holds like 5 ml 4 wicks easy cleaning and tons of vapor
Hmmm.....that's one thing I have never tried. I was always kind of put off by the flat drip top.
Mogi, what kind of juice are you using? Is it high on vg? You might try trimming the wicks, clip them off right next to the opening.
they are trimmed like that.. I am using 60/40 and then hype in the other both have the same problems
You can always pull the center post on the Phenix BC XL's and file a slight "V" groove across the part that goes above the wick. That little extra notch should help the heavier VG juices. But if you go back to a thinner juice on the modified one it may leak.
I try to stay away from pg when possible at least anything more then 50 50.. although I don't think I have the xl's
Last edited:
- Status
Similar threads
- Locked
