Gourmet juice junkies and random rambles

Status
Not open for further replies.

Jonathan

Ultra Member
ECF Veteran
Jun 7, 2009
1,133
5,281
Louisville, KY
Didn't even know this could fit. Oh man I'm excited

uru4ety7.jpg

Thats what she said!!!
 

Jonathan

Ultra Member
ECF Veteran
Jun 7, 2009
1,133
5,281
Louisville, KY
It's $30 at the place I got my Taifun clone... I'm still liking it. I have been eying the classies for a cheap REO. I'm not in a rush to get one or anything... But if I see one cheap, like I did a couple weeks ago, I want to get one just to see. I still am unsure whether or not I'll like it but you never know until you try, right? And like I said before, even if I don't like it, my dad might (if he EVER actually decides to start vaping like he said he was) or I can resell it.

You wont like it at all. Youll absolutely love it, and then itll be all your other stuff posted on classies, lol
 

Jonathan

Ultra Member
ECF Veteran
Jun 7, 2009
1,133
5,281
Louisville, KY
Robs going to be offering several new attomizers soon. If you prefer dual coil builds the cyclone with the afc cap would work for you.

Sent from my EVO using Tapatalk

Good luck getin one right now, they have been doin r&d and I think there are only a few left at one site in the US, indyvapors.com. Just got one myself, should be here tomorrow.
 

Jonathan

Ultra Member
ECF Veteran
Jun 7, 2009
1,133
5,281
Louisville, KY
I just always figured the flat ribbon would make it hotter. Only problem with mine is that my RBAs would not be conducive to flat ribbon and I'm not buying another one right now.

It all depends on the width of the flat(works like gauge does w resistance, wider = less resistance). The skinny stuff is higher ohms, less heat, vice versa with the wide. Buy several small lengths of wire from kidneypuncher. Theyre 1.99 to try, and come several feet wrapped around a nifty coaster. Tinker around w different numbers of wraps/ different kinds of coils. Microcoils arent doable with with flat unless you do a twisted coil. If you do twisteds, get .1x.3mm flat or it will be way too low res. Flat coils make more surface area than round and much more flavorful and enjoyable vapor for me. I dont do lung hits, I mouth-to-lung. 1/16th hole in my atty, between 5 and 8 wraps of .1x.5mm flat depending on what flavor I vape, REO mech. But thats my sweet spot, I cant say whats best for Jess. Everyone seems to gravitate towards their own favorite builds. Kidneypuncher has some awesome juices too, many brands of high quality stuff. Best deal on wire in small qty's tho
 

Rin13

Ultra Member
ECF Veteran
Verified Member
Dec 9, 2011
1,930
6,146
41
Ohio
www.youtube.com
I frankenvaped my Southern Steam Cheesecake into a boysenberry something by adding boysenberry flavoring from Wizard Labs. At least it is not wasted juice. I also added some Cheesecake Flavoring but I do not taste that (yet). It has only been four days. Going to wait a week and try again and maybe add more cheesecake.

Boysenberry is good. Very strong though.
 

Rin13

Ultra Member
ECF Veteran
Verified Member
Dec 9, 2011
1,930
6,146
41
Ohio
www.youtube.com
You wont like it at all. Youll absolutely love it, and then itll be all your other stuff posted on classies, lol

I'll believe it when I feel it. (also what "She" said)

**And I will NEVER get rid of my Provari.... unless I fall into hard times and have to sell everything... in which case, it's the last to go**
 

Jonathan

Ultra Member
ECF Veteran
Jun 7, 2009
1,133
5,281
Louisville, KY
I'll believe it when I feel it. (also what "She" said)

**And I will NEVER get rid of my Provari.... unless I fall into hard times and have to sell everything... in which case, it's the last to go**
Thats what I said about my zmaxes, but Im about to sell one and charger batts tank and juice for cheap to a needy smoker. He did the best out of all my converts for a while and then fell off the wagon. Another like ourselves that werent satisfied by mere ego's. I went to see him and his girl w my gf after work earlier and I think I have him convinced with my reo and peach wildwood, lol. His first comment was, man this tastes good and I like how there isnt too much flavoring. Bad juice will burn you out. He was a halo fan, and then just quit vaping one day.
 

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
I'm not against vaping at lower wattages, mind you, I just don't enjoy the 7-12 watt range. doesn't do anything for me.

it's not so much a stab at those vapers as it is a stab a device that could easily accommodate a higher amp limit that could cater to more people.

the provari is a greatly made product. their QC is phenomenal. They just have 1 product with one set of features, more or less.
 

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
and to expand on the VW > VV, you have to look at it from the idea of the provari in general. it's basically a set and forget kind of device. everything "should" work on it.

the problem with that is you never have any idea what wattage your vaping at unless you have a calculator. your desired voltage is directly dependent, and changes, with the resistance of your coil.
 

Rin13

Ultra Member
ECF Veteran
Verified Member
Dec 9, 2011
1,930
6,146
41
Ohio
www.youtube.com
idk, I sold my provaris (mini, v2, and v2.5)

just couldn't vape at what my wife and I liked to vape at.

honestly, being variable voltage with having such a low amp limit is pretty foolish. having variable wattage is superior imo
I had a VW device and I never used that function. I never vape over 4.5 volts so up to 6, is fine for me.
 

Rin13

Ultra Member
ECF Veteran
Verified Member
Dec 9, 2011
1,930
6,146
41
Ohio
www.youtube.com
I'm not against vaping at lower wattages, mind you, I just don't enjoy the 7-12 watt range. doesn't do anything for me.

it's not so much a stab at those vapers as it is a stab a device that could easily accommodate a higher amp limit that could cater to more people.

the provari is a greatly made product. their QC is phenomenal. They just have 1 product with one set of features, more or less.

To each their own. I couldn't care less about features I don't use. LOL
 

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
what I'm getting at is, saying you vape at 4.5 volts means nothing...

in that, it's a requirement to know the resistance of your coil to determine the wattage you are vaping at

if I tell you I've vaping at 20 watts, the resistance of my coil is superfluous, as the wattage will dictate the voltage based on the resistance.
 

Rin13

Ultra Member
ECF Veteran
Verified Member
Dec 9, 2011
1,930
6,146
41
Ohio
www.youtube.com
Ok... I vape 1.5 to 2.5 resistance... So still... up to 6 volts is perfect fine for me. If I want a sub-ohm, I have 2 mechanicals... which are collecting dust BTW.
I don't like dripping... which is why I am resistant (lol, pun) to get a REO. However, I am open-minded and won't try to knock it too hard til I actually try it.
 

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
to expand on this discussion, let's say I say "I vape at 4.5 volts"

this could mean infinitely numerous things that really give you no idea of the type of vaper you are

example: 4.5 volts @ 0.2Ω = 101.25 watts
4.5 volts @ 0.5Ω = 40.5 watts
4.5 volts @ 1.5Ω = 13.5 watts
4.5 volts @ 2.0Ω = 9 watts

the problem with VV is, unless you do those calculations, you have no idea what you're vaping at
 

Rin13

Ultra Member
ECF Veteran
Verified Member
Dec 9, 2011
1,930
6,146
41
Ohio
www.youtube.com
And I really don't care to do all that calculating. I have a 2.2 Protank on right now and its great at 4.2 volts. That's all I know. I adjust accordingly. I'm not saying that your logic isn't there but I do what works FOR ME. Really getting tired of people trying to tell me what I'll like or should like. Gets old.
 

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
Ok... I vape 1.5 to 2.5 resistance... So still... up to 6 volts is perfect fine for me. If I want a sub-ohm, I have 2 mechanicals... which are collecting dust BTW.
I don't like dripping... which is why I am resistant (lol, pun) to get a REO. However, I am open-minded and won't try to knock it too hard til I actually try it.

dripping is a pain in the .... not gonna lie about that. unfortunately, when you chase flavor like some of us, you kind of get spoiled

like, I haven't used my taifun in over a week because these KoC juices just taste so much better out of the Magma RDA. I'm reduced to taking a bottle of juice with me now, which stinks.

now, if I could get a magma that was bottom-fed, with a regulated REO with a DNA30 chip in it, I'd be all over that
 

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
And I really don't care to do all that calculating. I have a 2.2 Protank on right now and its great at 4.2 volts. That's all I know. I adjust accordingly. I'm not saying that your logic isn't there but I do what works FOR ME. Really getting tired of people trying to tell me what I'll like or should like. Gets old.

well, you would know more than anyone else...

if your resistance is constant, sure. you could dial in your desired taste through trial and error

what I'm saying is, if you found your wattage, it wouldn't matter what the resistance is. guess work eliminated. you could be handed a random tank with a random juice and you'd already be at your desired vape setting
 
Status
Not open for further replies.

Users who are viewing this thread