Hiya Tim! I was wondering if there was anything in the works for the BAM mod? Plus I figured another post couldn't hurt. 
- Status
Hiya Tim! I was wondering if there was anything in the works for the BAM mod? Plus I figured another post couldn't hurt.
Hiya drewbalicious!
I could probably put together a holster if given the dimensions, provided that I can dig up a form of the correct size. I would need to know the diameter at the widest point, and height, not counting atty/carto or tip.
I fully agree with you drewbalicious.
With a good holster it’s easy for me to carry around with a bigger mod the whole day. Griffin’s mod holsters are also very nice and of good quality. I have the lanyard holster for Provari and want to order also the Flexi holster. But I’m waiting first on receiving next week my new Dingo (a brandnew PV from Atmizoo out of Greece)
The Roller/Dingo from Atmizoo has a diameter of 22 mm and the switch on the top, so I expect the standard Provari holster wil make a good fit. Will first test the Dingo (in 18650 etended version) in my lanyard holster for Povari before I make the order.
Last edited:
Yes, the Roller/Dingo with Kick extension (18500 mode) fits 100% perfect in my SerenityGear Mod lanyard for Provari, both caps version. Roller/Dingo in 18350 mode fits also, but leaving 1,5 cm empty space at the lanyard bottom. For using Roller/Dingo only in 18350 mode, I guess the mod lanyard for Provari Mini in both caps version should be better.
I use Roller/Dingo mainly the 18500 or 18650 mode and just ordered SerenityGear Flexi holster for Provari, both caps version. Guess this one will fit Roller/Dingo perfect as the Mod lanyard does. If wrong, I can use the Flexi holster for my Provari; no problem.
I use Roller/Dingo mainly the 18500 or 18650 mode and just ordered SerenityGear Flexi holster for Provari, both caps version. Guess this one will fit Roller/Dingo perfect as the Mod lanyard does. If wrong, I can use the Flexi holster for my Provari; no problem.
I've read all the post on this thread, and I'm convinced I'd really want one of these gorgeous holsters.
One of the posts mentioned the possibility of a sleave and a holster that accepts the sleave, but I didn't see anything after them mention. Have you built anything like that yet. If so, are the any pics available?
I'd be looking to pimp my ProVari with the Z-Atty-P.
If it's possible, I'd like to talk to you about some further customizations.
One of the posts mentioned the possibility of a sleave and a holster that accepts the sleave, but I didn't see anything after them mention. Have you built anything like that yet. If so, are the any pics available?
I'd be looking to pimp my ProVari with the Z-Atty-P.
If it's possible, I'd like to talk to you about some further customizations.
I have done a few holsters designed to fit the sleeved mod - here's a photo of one from my gallery:
There's no extra charge for expanding the holster to accommodate the sleeve, just include a note when you place your order or email me right afterward to let me know that that is what you want.
As shown above, I can also extend the length of the flap to accommodate a tank if you let me know how tall your tank is - no extra charge for that either.
My VAMO just came in the mail a few minutes ago and I am preparing to work up patterns now. Sleeves and holsters for the VAMO should be included in the ordering options on my site by the end of the week.
Tim, I received the ordered Flexi holster for Provari, both caps version. It’s indeed a fantastic holster with a lot of options how to use, perfectly fitting Provari and the Roller/Dingo in 18500/18650 mode. I even use it (with some care) for my Super T Manufacturing Precise Plus 18350; the endbutton of the Precise Plus can be pressed from the opening in the bottom of the holster and I can press the (20mm small) Precise Plus itself a bit in the opening, so the Precise Plus is somewhat fixated and not falling out of the holster easily. It’s ofcourse not a perfect fit for the Precise Plus, but it does the job with some precaution. This Flexiholster will be used a lot, it's great help for carrying my mods.
Edited after a day of fiddling; for filling up just put a small peace of carton, or leather, or elastique waistband or something like that inside the back of this Flexi holster and the Super T’s Precise Plus fits very well and is good fixated. Also great for just setting/storing the Precise Plus vertical on a table. Normally that’s not possible because of the end button of the Precise. This way it’s a also a great holster/lanyard for Super T’s Precise Plus.
Edited after a day of fiddling; for filling up just put a small peace of carton, or leather, or elastique waistband or something like that inside the back of this Flexi holster and the Super T’s Precise Plus fits very well and is good fixated. Also great for just setting/storing the Precise Plus vertical on a table. Normally that’s not possible because of the end button of the Precise. This way it’s a also a great holster/lanyard for Super T’s Precise Plus.
Last edited:
Sorry, nothing for the Chi You at present. Assuming that there is a way to disable the button (since the weight of the device will sit on the button when it is in a holster), and that I have or can make a form of the correct size, I may be able to make up a holster from the dimensions if you want to provide them.
Thanks Lydia, that's good to know! A couple of folks have asked about Precise Plus sleeves recently and I've been concerned about how a bottom button device would work in a sleeve.
Basically, I offer two styles that can be used as lanyards; the standard lanyard, which only comes up to just below the button and has a leather cord (left), or the flexi-sleeve (right) which can be used on the included nylon lanyard. You can also use the flexi-sleeve with your own cord of any type.
Flexi-holsters can also be used as makeshift lanyards but, if you'll be using it as a lanyard all of the time, I would recommend one of the above options.
I just got an Electric Angel mod and I was wondering if you had any cases or holsters for it?
Sorry, nothing for the Lambo XL at this time, though it looks like it's the same as a Lavatube v2.0, which is on my list.
I don't have anything for the Electric Angel either, though I probably won't be able to do anything with that one, due to the placement and style of the button.
I don't have anything for the Electric Angel either, though I probably won't be able to do anything with that one, due to the placement and style of the button.
I can’t found eVIC line.
Looking some like “Renegade Flip-Top Holster” with Snap button for: eVIC.
Looking some like “Renegade Flip-Top Holster” with Snap button for: eVIC.
- Status
Similar threads
- Locked
