HANA MODZ DNA 30 Clone arrived today from FT.
- Thread starter Vaponators
- Start date
- th_trl_thread_readers 0
- Status
Wow that looks great , congrats.
No problem. 10 hours is maybe little exaggerated but you can count on 7-8 hours for sure!
They are gonna replace the board for 50$ authentic ones? Are you sure?
Mine hana clone from hotcig has ALL the features like original (board looks different though) and ohm meter is accurate!
I wouldn't even bother replacing the board unless it died on me .
Low watts for single coil and high watts for dual
Depends , i use relatively low wattage for both types and they work great .
The authentic V3's do the same thing. After mine sits for a while and sleeps, you can hit any of the three buttons once to wake it up. Regardless of which button you hit, the screen lights up with "HANA MODZ" on the display. You then can either adjust the wattage or fire the device. This functionality is the same on both the authentic full sized and the authentic mini.
I wont replace the board. Why should i if its working
Well i like 20+W for dual coil rba because i am used to mechanicals and subohm
Kayfun doesnt like too high power, so i stick around 16W.btw Hana really looks good and its freaking tiny and i like that, because i carry my personal medical vaporizer (ecig
) in my pocket like my phone.I wont replace the board. Why should i if its working
Well i like 20+W for dual coil rba because i am used to mechanicals and subohm
btw Hana really looks good and its freaking tiny and i like that, because i carry my personal medical vaporizer (ecig
Oh i got you , yeah with RDA's you definitely want higher wattage , i was referring to the dual coil clearos like the Iclear 30's etc... i keep those pretty low , usually no higher than 10 watts.
For higher power you have to have proper atomizer with fast wicking and bigger/thicker coils. iClear 30 would not withstand that high wattages without burnt taste. Its all in the design and build
Booyah! 13 DAYS. 13 DAYS. 13 Days for the orange 18650 version. I thought it would be at least another week or two. I'm over the moon. 13 days for a shipment with a battery? You go Fasttech.
Adjustable 510, great anodizing, I'm pretty pumped. Now I'm just not sure which one I'm taking to work tomorrow.
Last edited:
I got my black Hana V3 today! Only 12 days on the slow boat to WA state, I didn't expect it for another week minimum! The one I got is nice and clean and has an adjustable 510. I'm loving it so far! My Zenith and KFL+'s work great on it!
Only a couple issues I have with it so far.
#1 I can't seem to lock the power. I hold both the + and - and it never locks. Don't a big deal though probably wouldn't use that function much anyway.
#2 My Plume Veil or my Origen RDAs wont fire on it, it says check atty.
Only a couple issues I have with it so far.
#1 I can't seem to lock the power. I hold both the + and - and it never locks. Don't a big deal though probably wouldn't use that function much anyway.
#2 My Plume Veil or my Origen RDAs wont fire on it, it says check atty.
Booyah! 13 DAYS. 13 DAYS. 13 Days for the orange 18650 version. I thought it would be at least another week or two. I'm over the moon. 13 days for a shipment with a battery? You go Fasttech.
Adjustable 510, great anodizing, I'm pretty pumped. Now I'm just not sure which one I'm taking to work tomorrow.
Congrats! Very nice pair there. Thanks for the pic. I wanted to see a mini next to the full size 18650. Looks good. I think I know what I'm ordering next.
I got my black Hana V3 today! Only 12 days on the slow boat to WA state, I didn't expect it for another week minimum! The one I got is nice and clean and has an adjustable 510. I'm loving it so far! My Zenith and KFL+'s work great on it!
Only a couple issues I have with it so far.
#1 I can't seem to lock the power. I hold both the + and - and it never locks. Don't a big deal though probably wouldn't use that function much anyway.
#2 My Plume Veil or my Origen RDAs wont fire on it, it says check atty.
The "Check Atty" message means your ohms are too low or you might have a short. Check your coils for shorts and make sure your ohms aren't too low. FT says it is "Compatible with 0.5ohm~3.3ohm atomizers" which means the mod won't fire below 0.5 ohms. I have seen some reviews saying it won't fire below 0.7 or 0.8. I haven't tried any sub-ohm builds on mine yet but I can confirm that it does fire at 1.1 ohms.
Hope this helps.
Honestly, after getting the 18650 I kinda wish I would have bought another mini. I like it that much. Plus vaping around 13 watts on a 1.2 ohm Kayfun lasts me all day. Now if I'm trying to crank it up with a sub ohm dripper or something the battery life is decreased, but it still ain't too shabby.
Do you have adjustable pin on orange hana, i see low serial number 122, mine mini is 285 and still no adjustable pin? How about ohm reading, is it accurate?
I think the FT serial numbers are random. They aren't indicative of relative build date or chronology.
Yes, it does have an adjustable pin.
Resistance reads approximately .2 Ohms high, my Mini .1. Consistent, but wrong.
I am in agreement. I don't think the numbers symbolize anything.
Considering I just got mine yesterday and the "serial number" is 060... the numbers mean nothing.
Booyah! 13 DAYS. 13 DAYS. 13 Days for the orange 18650 version. I thought it would be at least another week or two. I'm over the moon. 13 days for a shipment with a battery? You go Fasttech.
Adjustable 510, great anodizing, I'm pretty pumped. Now I'm just not sure which one I'm taking to work tomorrow.
I went to order one yesterday, and the only shipping option for me was ""Registered Surface Mail via Hong Kong Post +$0.80 (45 to 60 days in transit)" What option was available for you?
Last edited:
- Status
