HCigar VT Inbox (VTinbox) - evolv VT75

[t8kiteasy]

O.k. people just received my vape mail and opened the mods first. The V3 inbox had to go first and let me tell you,compared to the first versions,this one is breathtaking. (I ordered the 3D panel version) The panels on this leave you speechless just looking at them. The magnets on the doors are better also,the are snug in place. The bottles are soft silicon and very nice just can't make out which softies they are? And of course,the tube is gone so you can use your own bottle.


I am very pleased with it and at the moment I have my new black wasp nano for it s being cleaned along with all the extra bottles for it and the new magic box. This V3 is worth every penny and then some. I do believe this will now take the top spot over my RSQ. I might be gushing over this thing but it is gorgeous,especially the 3D panel version.

 

[Bakseated1]

O.k. people just received my vape mail and opened the mods first. The V3 inbox had to go first and let me tell you,compared to the first versions,this one is breathtaking. (I ordered the 3D panel version) The panels on this leave you speechless just looking at them. The magnets on the doors are better also,the are snug in place. The bottles are soft silicon and very nice just can't make out which softies they are? And of course,the tube is gone so you can use your own bottle.


I am very pleased with it and at the moment I have my new black wasp nano for it s being cleaned along with all the extra bottles for it and the new magic box. This V3 is worth every penny and then some. I do believe this will now take the top spot over my RSQ. I might be gushing over this thing but it is gorgeous,especially the 3D panel version.

Can you upload a pic? Not sure I know what you mean by 3d panel version.


Sent from my iPhone using Tapatalk

 

[t8kiteasy]

$99.00 Authentic HCigar VT Inbox V3 75W TC VW APV Box Mod - 1-75W / 200-600'F(100-300'C) / 1*18650 / built-in 7ml Squonk Bottle at FastTech - Worldwide Free Shipping

There is the link.give me a couple minutes to snap pics and upload them.

 

[t8kiteasy]

https://m.imgur.com/account/t8kiteasy/images/PvFaShL


Sorry I do not know what is wrong but imgur has a problem. The link for pics are there but not posting??

Try this again
.

 

[archimede]

I did pick up some of the new plastic bottles (the clear ones) from FT for my V1's.

Do you have a sku for those bottles? They are softer than the original bottles i believe?

 

[t8kiteasy]

5 pack sku# 9624575
10 pack sku# 9624574

They look like they are being restocked now glad I picked them up when I did.

 

[Roadtrip635]

Just got some new black leather doors for my V1 VT Inbox and they fit perfectly, no wiggle or wobble. My Inbox had the "colorful" doors, but wanted to change it up and the new doors look great, feels like I got a brand new mod.

 

[t8kiteasy]

Just got some new black leather doors for my V1 VT Inbox and they fit perfectly, no wiggle or wobble. My Inbox had the "colorful" doors, but wanted to change it up and the new doors look great, feels like I got a brand new mod.

The different doors do give a new mod appearance. I started to grab the five pack of them with my V3 but figured the bottles would be hard to get ahold of if I did not grab them,so I did.

For $28.00 is not a bad price for 5 sets of doors.

 

[hazozita]

Do you have a sku for those bottles? They are softer than the original bottles i believe?

The ones for the V1 and V2 are: $2.20 Authentic HCigar VT Inbox Mod Replacement Squonk Bottle (5-Pack) 5-pack - 8ml / PE at FastTech - Worldwide Free Shipping

It's the same listing (as I recall) as the original plastic opaque bottles, but the ones shipping now are clear and much softer. They fit the Inboxes that have the tube attached to the body.

The SKU's listed by @t8kiteasy are the silicon bottles for the V3. They are true silicone, but will only work with the V3.

Edit: Pic attached. The new one is on the left (with stopper attached); original on the right

 

[Jumpin' In...]

5 pack sku# 9624575
10 pack sku# 9624574

They look like they are being restocked now glad I picked them up when I did.

Do the spare bottles for the V3 come with a cap to fully seal the bottle or does it come with just the cap with the tube assembly?

Just wondering whether you can carry a spare bottle full of eliquid around in your pocket (or wherever).

 

[Dropmyload]

Exactly, I have the Steam Engine SS316L wire profile loaded as well as the UD SS316L V4 version from the Evolv forums as well, which is a much warmer vape for me.

I have a DNA 75 mod and I use with Titanium coil...any idea where I can get the profile from and how to load it?

 

[t8kiteasy]

Not a closed off cap. They come with the cap with hole for the tube to be inserted.
You do have to order a spare refill bottle unless you do not mind going around with a full bottle and the tube ?


EDIT: FYI- The V3 does come with a solid cap with the spare bottle in it so you would have a closed off bottle

 

[TrollDragon]

I have a DNA 75 mod and I use with Titanium coil...any idea where I can get the profile from and how to load it?

Your DNA 75 should already have a profile for Titanium, have you cycled through all of them to see? With the +/- buttons locked (press and hold both to lock or unlock) pressing either one twice will start to scroll through the different profiles. One of them should be Titanium.

If not, you can get wire CSV profiles from Steam-Engine.org in the Wire Wizard tab.

Select the material from the drop down in the Wire Builder section ie Titanium 1 if that is what you have. (Note* Sweet Spot Titanium is different than Regular Titanium GR1, they have a profile for it on their site.)

The coil dimensions do not matter so you don't need to change anything for them.

With Titanium 1 selected, press the DNA 200 button in the upper Temperature Control box. It should give you the option to download the TFR table as a CSV. Save that file and load up eScribe.

In eScribe, connect your mod, download it's settings and go to the Materials Tab.
There you should see all the known wire listed in the left hand panel and all the ones on your mod in the right hand panel. If there is no Titanium anywhere you can use the Import material button to add that saved CSV file.

It will show up on the left hand side, you select it and hit the > button to put it on the mod. I do an Upload setting to device at this point.

After that's done, you go back to the General tab in eScribe and configure one of the Profiles for Titanium by setting the Coil Material to Titanium. I run the TC profiles with Temperature-Dominant selected as you would adjust the temp more than power in TC modes. But that is a personal preference as you can adjust either setting from the locked or unlocked +/- buttons.

Don't forget to always Upload any changes to the mod.

Hope this helps, there should be a ton of eScribe tutorials on YouTube that covers the rest of the settings and general DNA functionality.

 

[Dropmyload]

Thank you. I still need to figure my dna out. Am using the stock titanium profile.

 

[sk25411]

Nice looking mod, really happy with the doors. First squonk mod, first external battery mod, topped with my first rda!

Liking it so far!

 

[Jumpin' In...]

Nice looking mod, really happy with the doors. First squonk mod, first external battery mod, topped with my first rda!

Liking it so far!

View attachment 737249

So how do you like that Berserker RDA? Thoughts on the airflow?

Thinking of getting one or two of those because of impending State taxes and regulations, along with a couple more mods before the axe strikes. Need to stockpile nic too.

 

[sk25411]

So how do you like that Berserker RDA? Thoughts on the airflow?

Thinking of getting one or two of those because of impending State taxes and regulations, along with a couple more mods before the axe strikes. Need to stockpile nic too.

Depends on what type of vape you’re looking for. I prefer a SUPER tight draw, and exclusively MTL. With many different airflow inserts, I think you could get it to a nice restricted lung hit if you wanted, but I haven’t tried.

I really like the deck, it’s easy to build on. The airflow is nice, however, I can’t get it as tight as my sxk doggystyle tanks. It’s still tight, for sure, just not quite there. I’ve put fused claptons, twisted, and single round wires in there. All provide a nice vape.

The quality of everything (machining, parts, etc) is top notch. The bell CAN be quite difficult to remove when you want to rebuild or wick, but it’s not a deal breaker.

Flavor is on par or a slight notch above the doggy for me, but that’s subjective.

Some aren’t too keen on the drip tip, or the aesthetics, but I really like both!

I really enjoy it overall, and will probably get another as well, for your reasoning. Another option is the vapefly galaxies, which I’ve heard can get tighter than this, but who knows, I don’t always trust what I read haha!

 

[sk25411]

Anyone have a link to the replacement bottles for the v3?

I thought I ordered the correct ones, and they have a considerably different top. Unless I can mcguyver something to make them fit, I don’t think it’s happening.

 

[t8kiteasy]

Anyone have a link to the replacement bottles for the v3?

I thought I ordered the correct ones, and they have a considerably different top. Unless I can mcguyver something to make them fit, I don’t think it’s happening.

FT has them in a 5 or 10 pack.
$9.20 Authentic HCigar Magic Mod Replacement Squonk Bottle (5-Pack) 5-pack - 7ml / silicone at FastTech - Worldwide Free Shipping .

 

[oplholik]

I think I have a v3, and it takes these bottles. $2.20 Authentic HCigar VT Inbox Mod Replacement Squonk Bottle (5-Pack) 5-pack - 8ml / PE at FastTech - Worldwide Free Shipping
Actually, I'm not sure which bottle is for what version.