help please on afs and 7.2v atomizers

[fussy]

Can someone please help me.I recently recieved a trans and a slim and they are the best.I also ordered 7.2v atomizers for my trans,the problem is that they dont fit onto my trans.Do i need a adaptor?They are too big.
Also my afs fits onto my slim,but the atomizer once in the afs is too short to fit onto my trans.Can someone please help.Thankyou

 

[Lisaf01]

Can someone please help me.I recently recieved a trans and a slim and they are the best.I also ordered 7.2v atomizers for my trans,the problem is that they dont fit onto my trans.Do i need a adaptor?They are too big.
Also my afs fits onto my slim,but the atomizer once in the afs is too short to fit onto my trans.Can someone please help.Thankyou

Hi and welcome to the GG forum.

To use the 801 High voltage atomisers, you will need an adapter. I believe Imeo is making some more right now.

I am not exactly sure what you mean about the AFS issue. There should be no problems at all using it on the trans - that's primarly what it was made for. Did you watch the videos to see how to attach it etc?

 

[Stormynights]

Can someone please help me.I recently recieved a trans and a slim and they are the best.I also ordered 7.2v atomizers for my trans,the problem is that they dont fit onto my trans.Do i need a adaptor?They are too big.
Also my afs fits onto my slim,but the atomizer once in the afs is too short to fit onto my trans.Can someone please help.Thankyou

The top of the AFS where the mouthpiece goes is flush with the top of the atomizer.

 

[fussy]

Hi thankyou for your quick replys,i understand now with the 801 atomiser,but my afs looks different to the one in the video im wondering if i ve got it assembled correctly,the atomiser is flush both ends with the afs.The video afs seems to have only one,threaded end,my afs has them at both ends.

 

[emonty]

Hi thankyou for your quick replys,i understand now with the 801 atomiser,but my afs looks different to the one in the video im wondering if i ve got it assembled correctly,the atomiser is flush both ends with the afs.The video afs seems to have only one,threaded end,my afs has them at both ends.

yes, you have the new one. There is another video, where Imeo shows how to handle the AFS:

http://www.youtube.com/watch?v=2_BOE7kqN1k&feature=player_embedded

 

[fussy]

Thankyou for your replys,i still cant see how you attach the new afs to the trans,there is no exposed thread to attach the the trans.On the slim the thread is exposed and screws onto the afs but on the trans the thread is flush and i cant attach.

 

[emonty]

Thankyou for your replys,i still cant see how you attach the new afs to the trans,there is no exposed thread to attach the the trans.On the slim the thread is exposed and screws onto the afs but on the trans the thread is flush and i cant attach.

what type of atomizer are you using?
it fits 901 standard. For a 501 or a 801 you need an adapter

 

[fussy]

Hi im using the 901 modified for the afs,when the 901 is in the afs,you cant see the 901 at all,i think the problem is with the trans,because the thread is invisible on the trans,but on the the slim the thread is exposed.It is hard to explain and i bet even harder to understand.

 

[fussy]

Hi thanks for all your help i think i ve resolved the problem now,when i attach the mouth piece it seems to work.Thankyou

 

[emonty]

Hi im using the 901 modified for the afs,when the 901 is in the afs,you cant see the 901 at all,i think the problem is with the trans,because the thread is invisible on the trans,but on the the slim the thread is exposed.It is hard to explain and i bet even harder to understand.

watch the video in my previous post. The attie should stick out on the bottom of the AFS, exposing the bottom hole. The lasered hole is inside the attie.
Otherwise send some pictures. Can you fit the 901 on the GGT without AFS?

 

[emonty]

Hi thanks for all your help i think i ve resolved the problem now,when i attach the mouth piece it seems to work.Thankyou

....good!!! now go and enjoy