-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

[Todai]

JohnnyEars has a Luxe mods tube, I just have 2 of the LM drippers. I have only seen LM make 18350 mods, so .3Ω would be out of the question. The drippers only come with 1.2mm single airholes and don't support dual coils, that should tell you what type of vaper it's aimed at.

It's possible he makes larger mods, but I haven't seen any.

VapeRev will be selling LM stuff soon, so maybe wait and see. I know he makes a genny now also, which I'm eager to try.

Here's some more pics of his stuff. It's beautiful, I'm a huge fan. His email is here to if you want to get ahold of him.

http://instagram.com/luxemods

Edit: I see some 18500/18650 tubes there. In fact. he's got some pics of his tubes paired up with a TOBH, so who knows.

 

[Tbev]

Sweet, thanks, I saw a 350 for sale but no info on it, it's 20x1 so I was thinking I'd throw a 650 tube on it, I like the button but makes sense if he only makes 350's, I'll check it out. Thanks again!

 

[VapinBill]

Got the Achilles RDA by a Titanium Mods in today. The well is deeeeep. Nice vape so far with 28 twisted at .7 ohms

 

[JohnnyEars]

JohnnyEars has a Luxe Mods tube, I just have 2 of the LM drippers. I have only seen LM make 18350 mods, so .3Ω would be out of the question. The drippers only come with 1.2mm single airholes and don't support dual coils, that should tell you what type of vaper it's aimed at.

It's possible he makes larger mods, but I haven't seen any.

VapeRev will be selling LM stuff soon, so maybe wait and see. I know he makes a genny now also, which I'm eager to try.

Yeah I've got the hybrid dripper in 18350, like you I'm limited by the battery size. Andy can do bigger tube sizes to order, but again, 1.2.. air holes won't make for good air flow at low ohms. He's designed it primarily as a mesh dripper.
He can do them in various finishes, ss, copper, stardust and chocolate.
He did the genesis a while ago but I'm not sure if he's still producing them.

And I see you got the Achiles VapinBill, it will look nice next to all your Prometeys

 

[Tbev]

Those are media blasted finishes?

 

[JohnnyEars]

Those are media blasted finishes?

The chocolate is a heat treatment colour, and the stardust is like a bead blasted type finish.

 

[crazyarms]

JohnnyEars has a Luxe Mods tube, I just have 2 of the LM drippers. I have only seen LM make 18350 mods, so .3Ω would be out of the question. The drippers only come with 1.2mm single airholes and don't support dual coils, that should tell you what type of vaper it's aimed at.

It's possible he makes larger mods, but I haven't seen any.

VapeRev will be selling LM stuff soon, so maybe wait and see. I know he makes a genny now also, which I'm eager to try.

Here's some more pics of his stuff. It's beautiful, I'm a huge fan. His email is here to if you want to get ahold of him.

Instagram

Edit: I see some 18500/18650 tubes there. In fact. he's got some pics of his tubes paired up with a TOBH, so who knows.

Ive been following his instagram for quite some time. His name is Andy I believe. I was on the fence about ordering one a while back and he sent me the options I had and pricing. He will do 18650s and currently hes working on a 26650 i think as well. The switch is probably hefty enough to handle .3 but who knows.

 

[Todai]

Yes, Andy. If I have the story correct, Andy and Bart formed Versa together. They had a falling out, and went separate ways. Bart kept the Versa name and Andy started Luxe Mods.

 

[Tbev]

I'm gonna go with the XXIX I'm pretty sure, I spend a lot of time in Dana Point, right down the beach from BCV, I like the idea of the guy who makes the mod being close enough to go choke if say, they stop stocking a part... I'm sure I will be happy with James, he's been great and I don't even own his stuff yet.

 

[Todai]

Cartel is in Brea, if you want to spend that much ... another SoCal option. Also, I hear good things about Element Mods, SoCal also.

In any case, you can't really go wrong with BCV.

 

[crazyarms]

Yup that's what I heard too!

So I traded some stuff and have JM22 Carbon headed my way. Anyone have one of these? I told myself I'd never own a mod like it but I felt like being spontaneous. Looks to be a nice mod and it is 20x1 threaded. I normally would just watch a review but I'm at work right now and don't have headphones

 

[Tbev]

How would you compare them to BCV, @0.33ohm? Button, vdrop, size,?
Cartel to XXIX

 

[VapinBill]

Yeah I've got the hybrid dripper in 18350, like you I'm limited by the battery size. Andy can do bigger tube sizes to order, but again, 1.2.. air holes won't make for good air flow at low ohms. He's designed it primarily as a mesh dripper.
He can do them in various finishes, ss, copper, stardust and chocolate.
He did the genesis a while ago but I'm not sure if he's still producing them.

And I see you got the Achiles VapinBill, it will look nice next to all your Prometeys

Yes it will. The Achilles is a pretty decent dripper. Very consistent draw like the Prometey. Perfect for mouth to lung hits.

You may have seen this already:
VapeRev Announces Exciting New Partnerships With UK-Based Luxe Mods and Florida-Based Fall Out Mods
Adding to Its Growing International Profile, the Groundbreaking Southern California-Based Vaping Shop and Distribution Company Will Be Exclusive U.S. Distributor for Both Manufacturers

http://www.marketwatch.com/story/va...ds-and-florida-based-fall-out-mods-2014-07-21

 

[Todai]

I don't know anything about BCV, but I'm sure lots of folks here can chime in. And crazyarms, I think Strike has a JM22 Carbon.

I don't own a Cartel yet. But I did get an email from Gino that another pre-order is coming in August, so very tempted.

 

[Tbev]

Yup that's what I heard too!

So I traded some stuff and have JM22 Carbon headed my way. Anyone have one of these? I told myself I'd never own a mod like it but I felt like being spontaneous. Looks to be a nice mod and it is 20x1 threaded. I normally would just watch a review but I'm at work right now and don't have headphones

You just grabbed that one out of the classies? Is it a solid carbon tube or does it have a copper or something, tube wrapped in carbon? Do you have to use a safety to lock the switch or will it stand up unlocked? I really like that one too!

 

[crazyarms]

You just grabbed that one out of the classies? Is it a solid carbon tube or does it have a copper or something, tube wrapped in carbon? Do you have to use a safety to lock the switch or will it stand up unlocked? I really like that one too!

I honestly have no idea! Id assume its a tube wrapped in carbon. from what I could find it looks like it has silver plated brass pins (I think). But I really cant find much on it. It does have a lock ring, not sure about if it can stand up unlocked. They just came out with a new switch that is a recessed magnet switch I may upgrade too if the current switch isn't to my liking.

 

[StrikeIII]

Yup that's what I heard too!

So I traded some stuff and have JM22 Carbon headed my way. Anyone have one of these? I told myself I'd never own a mod like it but I felt like being spontaneous. Looks to be a nice mod and it is 20x1 threaded. I normally would just watch a review but I'm at work right now and don't have headphones

I have the JM carbon V2 and the switch is a bit crunchy and stiff. It'll definitely stand upright unlocked. It's a SS tube wrapped in carbon which is nice and is 20x1 threaded. Let me know how you like it. I put one of GP switches on it when I decide to use it.

Sent from my LG G3 using Tapatalk Pro

 

[Tbev]

I couldn't find much on it either, hope you like it, bud, it look sweet!

 

[VapinBill]

I don't know anything about BCV, but I'm sure lots of folks here can chime in. And crazyarms, I think Strike has a JM22 Carbon.

I don't own a Cartel yet. But I did get an email from Gino that another pre-order is coming in August, so very tempted.

Todal, a cool guy has a Cartel SS set for sale in the classifieds now. I grabbed the copper set from him earlier.

 

[crazyarms]

That's good to know then. Any idea the pin material? Is it silver plated brass?