-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

[Tbev]

I run 2.5 PAPS regularly at .4 on dual coiled Origens with no issue.
@tbev, We have a dedicated forum for needed help and Perseas is just an email/pm away

I appreciate it, I haven't bothered him BC I don't really want to pay shipping from Greece for a couple $2 Springs. And really if I'm going to, I don't want to wreck them once I get them, that's why I've been asking around to see how low people are running 2.5's.

 

[Tbev]

So I just replaced my 2.5 switch with my new BCV XXIX switch, threw my quasar @0.33ohm on top, and ripped it till I got too dizzy to hit it again.

Ta Dah! COLD BUTTON!

 

[alkaiser]

How low do you build your attys?

the lowest i've built was 0.15. i had that going for about a week. the usual dripper builds are around 0.25-0.4. gennies and kayfuns i usually keep around 0.9-1.0

 

[Tbev]

Cool, I've been ripping this BCV switch @0.33ohm and it's not even getting warm, I love it, I can stand it up on a tablecloth and it's fine, where the lux sinks in and fires. I'm stoked!
::

 

[alkaiser]

nice!

since you already have an XXIX, i wouldn't bother with an MCR flush setup. it really does the same thing, but the XXIX has a true hybrid topcap setup.

the MCR logo is just so...sexy. haha

 

[Tbev]

Thanks for the honesty, I agree and I'd rather spend my money in America anyways, especially with a company that has a guy like James and happens to be very close. Nothing against mcr... but ... location location location.

 

[jpcwon]

Really wanting to try an xxix now! What drew me to GP and MCR were aesthetics and performance/quality, but more importantly great customer service. It sounds like BCV has that as well, and I love supporting companies that have great customer service. Liam at MCR has been great to deal with, and Perseas at GP is always right there when you need him. I think it's time I got to know James at BCV!

 

[alkaiser]

james and his wife are great. i met them at a meet at a vape shop 2 months ago and they're awesome people. really great customer service. you can see from their insanely long calivapers thread how much they care about their customers and product.

the XXIX and Surfriders are definitely the mods i recommend to people who want a solid mod with a recessed button that can handle any kind of build thrown at it.

if GP included magnets instead their thin springs on their V3s, i would use it more often. i should put it up for sale and get another mcr LOL

 

[Vapourz_411]

Just got my Neovapetek Venturi RDA in today, did a quick dual coil 6/5 wraps with 24 gauge, pushed down almost half the coil below the deck to bring it closer to the air slots, put it on the MCR101 with copper nickel top and bottom caps, and wow, I am impressed!! This thing has very good (condensed and thick) vapor production but the flavor is out of this world good...thanks for the recommendation StrikeIII Love the clean lines and no logo... and it comes with three top caps!! No leaking from a dripper...nice job Neovapetek, nice job.

 

[StrikeIII]

Just got my Neovapetek Venturi RDA in today, did a quick dual coil 6/5 wraps with 24 gauge, pushed down almost half the coil below the deck to bring it closer to the air slots, put it on the MCR101 with copper nickel top and bottom caps, and wow, I am impressed!! This thing has very good (condensed and thick) vapor production but the flavor is out of this world good...thanks for the recommendation StrikeIII Love the clean lines and no logo... and it comes with three top caps!! No leaking from a dripper...nice job Neovapetek, nice job.

Looks awesome vapourz! Glad you like it. I can't wait until they release their other top caps around mid August.

Sent from my LG G3 using Tapatalk Pro

 

[Tbev]

It took 2 days to get to my mailbox in SoCal from BCV, I screwed up my order, they fixed it no problem, no delays. Obviously the switch is functioning 110% it's got a heavy throw that's a bit longer than the gp but I prefer it, I don't ever have to worry about it firing when I don't want it to. I have been running my quasar on my nemi Clone with dirty crunch button and I can tell it's now running at the very least, 0.3v higher than on the nemi Clone. As in recovered voltage drop. Couldn't be happier. Thanks BCV

 

[BrantlyT]

Just got the Tobh 2.5 for my CV1 Virtüs and it's awesome I love it! Very sweet looking also

 

[Herfalerf]

Just got my second mcr in. Alumibronze 500 tube (supposed to be 650, Liam is fixing it) polished. 500 copper nickel polished. Brushed can flush button, brushed cn top cap and hybrid adapter.

For those who have not tried the flush button: it's incredibl. The logo is raised and it feels wonderful. The throw is amazing. I love the regular switch on my ss mcr but but the flush button is better.

 

[2naphish]

It took 2 days to get to my mailbox in SoCal from BCV, I screwed up my order, they fixed it no problem, no delays. Obviously the switch is functioning 110% it's got a heavy throw that's a bit longer than the gp but I prefer it, I don't ever have to worry about it firing when I don't want it to. I have been running my quasar on my nemi Clone with dirty crunch button and I can tell it's now running at the very least, 0.3v higher than on the nemi Clone. As in recovered voltage drop. Couldn't be happier. Thanks BCV

i have magnets to make it softer LOL! trade ya for some rayon.

 

[mssam]

Yeah, ummm...Tbev, I've dropped the v3 switch to a .26 build and it was fine. I tried it out for a while, then switched to a different build. Glad you're happy now, but don't count GP out. I have NEVER had a switch get hot on me with a v3 - NEVER. Now, the 2.5...meh, can't really speak on that one, but obviously there are improvements to made on ANY mod, even a fluke instance. Now, forgive me for asking this, but if sub-ohming is your thing, have you thought about The Manhattan? Yeah, yeah, yeah, I know the story, but that is one hell of a mod that can surely handle whatever you have. I don't know about contacting the company for a part or something like that but that could handle whatever you have to throw at it...

 

[Tbev]

Manhattan didn't really do it for me, I like the mcr obviously and w recessed button n hybrid connector I'm in, but I can't see it 1up'ing BCV and I'd rather give James all my money than anyone else right now!
This switch is so efficient it's making all my builds feel a few tenths lower res. SOLID
::

 

[Idaholandho]

@ Vapourz what a great looking setup. Just perfect. Love the simplicity. Oh Strike def has good taste!

 

[mssam]

Manhattan didn't really do it for me, I like the mcr obviously and w recessed button n hybrid connector I'm in, but I can't see it 1up'ing BCV and I'd rather give James all my money than anyone else right now!
This switch is so efficient it's making all my builds feel a few tenths lower res. SOLID
::

Ok, so what I hear you saying to me is the mcr is better equipped to handled sub-ohm builds in your opinion? Ok, that's cool. I have one and love it. More power to you in your decisions.

 

[GreatestUnKnown]

Just got my Neovapetek Venturi RDA in today, did a quick dual coil 6/5 wraps with 24 gauge, pushed down almost half the coil below the deck to bring it closer to the air slots, put it on the MCR101 with copper nickel top and bottom caps, and wow, I am impressed!! This thing has very good (condensed and thick) vapor production but the flavor is out of this world good...thanks for the recommendation StrikeIII Love the clean lines and no logo... and it comes with three top caps!! No leaking from a dripper...nice job Neovapetek, nice job.

Stingray tip F*T*W....grrr well I will have to keep my eye out for this RDA now, seen it in stock a few days ago at one online retailer but I havent pulled the trigger yet.. decisions, decisions.

 

[Idaholandho]

Random - Surprised that this thread never saw much of any of the Nucleus rda by Mojo. Knowing it was last week's news I thought there were fans of his here local.