RDA Hobo Rda

Status
Not open for further replies.

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
Hm.. Is the modder on here or would we need to mail him directly? Seeing the issue as we described it in this thread would be more helpful to him than sending two separate emails I feel like.

I already mailed him about getting another insulator for the positive block and don't want to sound like a pain, haha. Yeah, you're the only other person I've read with this issue so maybe it isn't a widespread problem but a more isolated one. OR, perhaps we're too picky? I'm not sure..
Trust me ive emailed him a million times lol so i do feel like a pain customer. Thats why im so hesitant to email him again. He's on here, he actually commented a few pages back, i think he's HoboCNC i think? Not sure. But if i were to message him again i would email him, he seems more active through emails. I just rewicked and coiled my 1 hobo to see if itll do what the other 1 does and so far so good, no traces of liquid, yet. It seems when it sits all night i look at it in the morning and there it is, low and behold lol i have looked at this as me being too picky but ive done a lot to try and stop this and it isnt working so i dont feel like im being picky, not where the liquid is showing up, if it was somewhere else then yeah i might feel that way.
 
I mean, if we are the only two having issues with the thing, it sounds like just two random ones that have leaking issues to me. I could be completely wrong, but who knows? I'll email him and inform him of the issues and link to the timestamp we started conversing, possibly that will help. We should continue this through PM so we aren't overtaking the thread, lol :p
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL
Any reputable online sites with this in stock?

I never ordered one because I was in love with my MuteX.

Just got a clone from G Vapors and this thing is the s#!t. My clone was pretty damn good for a while but then found the 510 pin was screwing itself into the atty (must be the way I press the fire button on my SRX) and eventually causing dead shorts. How is the authentic's 510? Anyone got any pix?

Still, I built a .2Ω and wicked with rayon and I am loving this thing. So much so, that I want an authentic as long as the 510 pin sticks out enough.

I was able to sand down the 510 threading on this clone enough to get the copper 510 connection screw to stick out enough to fire properly this morning.

I see that Puff Puff Vape says that they have them in stock but with all of the comments about them and their pre-order fiasco, I'm not so sure if I should order from them. Sent them an email inquiring if they truly had them in stock and have yet to hear back from them.
 

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
Any reputable online sites with this in stock?

I never ordered one because I was in love with my MuteX.

Just got a clone from G Vapors and this thing is the s#!t. My clone was pretty damn good for a while but then found the 510 pin was screwing itself into the atty (must be the way I press the fire button on my SRX) and eventually causing dead shorts. How is the authentic's 510? Anyone got any pix?

Still, I built a .2Ω and wicked with rayon and I am loving this thing. So much so, that I want an authentic as long as the 510 pin sticks out enough.

I was able to sand down the 510 threading on this clone enough to get the copper 510 connection screw to stick out enough to fire properly this morning.

I see that Puff Puff Vape says that they have them in stock but with all of the comments about them and their pre-order fiasco, I'm not so sure if I should order from them. Sent them an email inquiring if they truly had them in stock and have yet to hear back from them.
I tried to take some pics for you but my phone is acting up so there not that great. But i can tell you that out of the 3 hobos i have the copper pin sticks out a little bit past the insulator and the 510 threads. I did see the clones and the ones i did see looked spot on, the only thing i could see visually from just looking was the insulator on the positive post inside was white instead of black. With how close the coils are to that thing i dont know if id trust it not to melt. But i assume you had no problems with this?
258b47602d09fe93d17f52a21206e753.jpg
9d505dae98f978aa806873ba57aa9110.jpg
 

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
Yup, that looks great. About what my clone looks like now that I sanded it down. No melting of the insulator. The 510 pin was up inside the connection though. Where did you get it from? Please done't say Puff Puff or VaporDNA (OOS).
Lmao, funny, you wont like my answer then. I was in the round 1 pre order with puff puff vape and i started thinking i wasnt going to see it for a while. So vapordna got them in stock so i ordered it from them, i got it about a week before the pre order with puff puff came in the mail. Ive seen it a bunch of places other then those 2 though.
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL
Lmao, funny, you wont like my answer then. I was in the round 1 pre order with puff puff vape and i started thinking i wasnt going to see it for a while. So vapordna got them in stock so i ordered it from them, i got it about a week before the pre order with puff puff came in the mail. Ive seen it a bunch of places other then those 2 though.

Ha! Yeah, although I didn't purchase one earlier, I have been keeping up with the thread. Saw where you and others had issues with Puff Puff. That's why I am so leery ordering from them. Got any other sources?
 

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
Ha! Yeah, although I didn't purchase one earlier, I have been keeping up with the thread. Saw where you and others had issues with Puff Puff. That's why I am so leery ordering from them. Got any other sources?
Yeeeeeah, i wouldn't go through them again, personal preference of course. If i was you, id buy from Subsonicvapes.com the guy is a friend of mine, super cool dude and great shipping. He has the clone and the authentic, plus those top hats if you'd want them. Trust me, you wont regret ordering anything from him.
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL
Yeeeeeah, i wouldn't go through them again, personal preference of course. If i was you, id buy from Subsonicvapes.com the guy is a friend of mine, super cool dude and great shipping. He has the clone and the authentic, plus those top hats if you'd want them. Trust me, you wont regret ordering anything from him.

Don't see the authentic on his site. Got a link?
 

HeiSINberg

Ultra Member
ECF Veteran
Verified Member
Nov 6, 2013
2,206
2,478
39
Groveville, NJ
Thank you very much my friend. :thumb:
No problem! TerraVapes.com out in New Jersey has them as well. In case your interested in a different site. I normally try to look around to see what vape shop is closer to me so i dont have to wait long for vape mail lol thats the worst.
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL
DC Vapor. I didn't want to pay taxes. Lol.

I am very happy with the quality and fit/finish. Great flavor atty with a deep well. I do have one issue though. There is a small scratch on the sleeve. Would you mind PMing me Hoberto's email addy?

I just started using TapaTalk so not sure if this image will show.

ImageUploadedByTapatalk1416077977.981278.jpg
 
Status
Not open for further replies.

Users who are viewing this thread